Post a reply

Before posting, please read how to report bug or request support effectively.

Bug reports without an attached log file are usually useless.

Options
Add an Attachment

If you do not want to add an Attachment to your Post, please leave the Fields blank.

(maximum 10 MB; please compress large files; only common media, archive, text and programming file formats are allowed)

Options

Topic review

martin

Re: "Windows - No Disk" error

dandv wrote:

I experience the same problem with 4.2.4 and found a way to reproduce it on Windows XP:

1. Have a bunch of USB drives/SD cards plugged in, then launch WinSCP.
2. Suspend the Windows machine.
3. Remove the drives
4. Resume the Windows machine from sleep.

I cannot reproduce the problem as described.
dandv

Re: "Windows - No Disk" error

I experience the same problem with 4.2.4 and found a way to reproduce it on Windows XP:

1. Have a bunch of USB drives/SD cards plugged in, then launch WinSCP.
2. Suspend the Windows machine.
3. Remove the drives
4. Resume the Windows machine from sleep.
martin

Re: "Windows - No Disk" error

Anonymous wrote:

I had the same issue with v4.1.9 only when using the registry to store my config on Win Vista Business 64bit. I traced the issue back to the temp dir settings. The error occurs when I used the "Use temporary directory of system" and then error went away when I switched to "Use this directory" and specified my user temp folder.

Can you send me an email, so I can send you back a debug version of WinSCP to track the problem? Please include link back to this topic in your email. Also note in this topic that you have sent the email. Thanks.

You will find my address (if you log in) in my forum profile.
Guest

Re: "Windows - No Disk" error

I had the same issue with v4.1.9 only when using the registry to store my config on Win Vista Business 64bit. I traced the issue back to the temp dir settings. The error occurs when I used the "Use temporary directory of system" and then error went away when I switched to "Use this directory" and specified my user temp folder.
andimue

Thank you

Hi wgmoore,

thanks for your tip! :D
It may help me and others who experience this error.

Andi M.
wgmoore

Re: "Windows - No Disk" error

I was getting this error message when starting a session that used the commander interface, but it was not a problem with winscp. It was a problem with my autoplay settings in XP.

While trying to troubleshoot, I noticed that when I looked at the CD drive in "My Computer", the CD would show the last label of the CD I had inserted - even when there was no CD there. If I used the disk manager to change the drive letter to something else and immediately changed it back to D:, the drive label would reset and winscp would run without the error.

I suspect that I created the problem when I ran a tweak utility to disable autoplay. I downloaded the autoplay repair wizard from Microsoft's web site. Then ran it a couple of times until all of the autoplay problems were repaired. Now when I eject the CD from the context menu or pressing the eject button on the drive, windows properly refreshes the drive letters. And I no longer get the "No Disk" error messages!

Microsoft's AutoPlay Repair Wizard
<invalid hyperlink removed by admin>

Hope this helps...
andi m.

more information about "no disk"

Sorry,

I forgot to give you some informations:

1. with a cd in drive e: the error is gone
2. I started winscp422.exe from cmdline with switch /log=log.txt but the logfile didnt show anything about e: (I can send you the file if needed)

Thanks again

Andi
andi m.

"no disk" error after updating from 4.21 to 4.22

Hi prikryl,

I am working a while now with WINSCP and it was always a pleasure.
I use the no-install standalone version with ini-file ( no registry ) on a Win XP pc.
Yesterday I downloaded the 4.22 standalone version and copied the old winscp421.ini to a winscp422.ini. Everytime since then when I start WINSCP I get the "no disk in drive e:" (which is my cd-rom).
Even switching back to winscp4.21 brings up the error, which never happend before I started winscp4.22 once.
I checked the startup with regmon & filemon and couldnt find anything.
Hopefully you can help me ?
If you wanna send a debug version: andi_mue (at) fantasymail.de

Thank you very much in advance :)
Nowegian

Re: "Windows - No Disk" error

martin wrote:

Norwegian wrote:

Can you send me the Debug Version, because i am also experiencing the same problem . My e-mail address is Aaron_tan123@hotmail.com

What version of WinSCP are you using?

I don't know how to do it .My is same as the last guy who ask you for the debug version .
martin

Re: "Windows - No Disk" error

Norwegian wrote:

Can you send me the Debug Version, because i am also experiencing the same problem . My e-mail address is Aaron_tan123@hotmail.com

What version of WinSCP are you using?
Norwegian

Re: "Windows - No Disk" error

martin wrote:

May I have an email contact to you, so I can send you a debug version?
Can you send me the Debug Version, because i am also experiencing the same problem . My e-mail address is Aaron_tan123@hotmail.com
iPwn

Re: It is the install location??

martin wrote:

rdevries wrote:

I uninstalled, rebooted and then copied the installation to the local C drive. Reintstalled from there and the error is gone!!

the first install came from a flash drive.

Can you reproduce the problem? E.g. by running WinSCP from flash drive again?

email me
<email_removed>
iPwn

Re: It is the install location??

martin wrote:

rdevries wrote:

I uninstalled, rebooted and then copied the installation to the local C drive. Reintstalled from there and the error is gone!!

the first install came from a flash drive.

Can you reproduce the problem? E.g. by running WinSCP from flash drive again?


May I get a copy of the debugger I got the exact same problem
martin

Re: It is the install location??

rdevries wrote:

I uninstalled, rebooted and then copied the installation to the local C drive. Reintstalled from there and the error is gone!!

the first install came from a flash drive.

Can you reproduce the problem? E.g. by running WinSCP from flash drive again?
rdevries

It is the install location??

I uninstalled, rebooted and then copied the installation to the local C drive. Reintstalled from there and the error is gone!!

the first install came from a flash drive.
rdevries

Here is the error i am getting

It works ok on vista business but i am getting the same error on two vista Home premium systems.

Windows - No Disk

X Exception Processing Message 0xc0000013 Parameters 0x756D92A0
0x00000004 0x756D92A0 0x756D92A0

thanks
rdevries

windows -No Disk

I am getting this error on Windows Vista Home premium.

using freeSSHd 1.2.1 on windows 2003 server and winscp 4.17 on client.

when first logging into the server i get garbled message when trying to decrypt the key.
martin

Re: registered reply

Thanks. I'll send you a debug version soon.
horatio

registered reply

Just replying with a registered/logged-in account. thx!
horatio

Windows - No Disk

Found this thread, but didn't see any follow-ups. Getting the same error message, which started a few days ago (not sure what brought it on) and upgrading from 4.1.3 to 4.1.6 didn't make it go away. It happens after connecting once I've punched in my password.

--------
Windows - No Disk
(X) Exception Processing Message c0000013 Parameters 7c7df5f8 b359e118 7c7df5f8 7c7df5f8

[Cancel] [Try Again] [Continue]
--------

If I 'cancel' or 'continue' the app appears to behave normally, but I can't be 100% sure of that.

If it matters I'm running this on WinXP64 connecting to my macbook.

thanks!
Horatio
martin

Re: "Windows - No Disk" error

May I have an email contact to you, so I can send you a debug version?
chrisjones

"Windows - No Disk" error

I've been receiving this since going to 4.0.6:

Windows - No Disk
Exception Processing Message 0xc0000013 Parameters 0x7592023C
0x87EADE2C 0x7592023C 0x7592023C

Rolled back to 4.0.4, and I still have the same error.

I can press Cancel twice and my site opens up fine, but I can't drag and drop.

Environment/Directories/Remember last used directory is not selected and both Remote and Local directories are empty.

Any ideas?