Lost Connection - Could not retrieve directory listing

Advertisement

elgjc3
Joined:
Posts:
2
Location:
UK

Lost Connection - Could not retrieve directory listing

Hello,

Having looked through the forums I couldn't see anything on this issue, so here goes.

I have recently changed routers from a BT Homehub 3 to a Homehub 5.

WinSCP 5.7 worked fine using the HH3.

I have configured the HH5 for port forwarding and confirmed port 21 is open etc.

Running WinSCP the dialogue box gets as far as

Reading remote directory...

I then get a Lost connection dialogue box with message:

Server sent passive reply with unroutable address 192.168.1.65, using host address instead.
Timeout detected. (data connection)
Could not retrieve directory listing.

Clicking on abort the following is appended to the dialogue box

Error listing directory '/array1'.

/array1 is the top level directory that I should be seeing.

Now the thing is that I can log in and see all of the directories on my NAS using the ftp client in Windows file explorer, so there is something different in the way WinSCP and Explorer are talking to the router.

Any advice to get WinSCP working with a HH5 would be most welcome.

Thank you.

Reply with quote

Advertisement

elgjc3
Joined:
Posts:
2
Location:
UK

Hello Martin,

Thank you for your reply and the link which I have read.

Port scanning, it looks like just have port 21 open. For a passive mode connection, which is what I am trying to use, I didn't think I needed anything other than 21 open?

For a passive connection mode, which other ports are needed to receive the return data?

I have tried forcing the IP address in WinSCP, but this also fails.

It still doesn't answer the question of why I can connect via the ftp client in Windows File explorer and list the directories? If it was a open port issue then this would also presumably fail?

Thanks,

Gavin

Reply with quote

AdiRO
Guest

Could not retrieve directory listing

Check the folder /etc/vsftpd/vsftpd_user_conf to see if your user have a file defined there. If yes, probably you will see some ssl settings in it
Change them, or comment them

Reply with quote

Advertisement

You can post new topics in this forum