Privatekey not accessible via Task scheduler
Goodday,
i have a batch file with a script in it using WINSCP 5.7.5.
the upload script is quite basic:
if i activate the batch file with the serviceaccount used by task scheduler there is no problem.
howeever if i activate it via taskscheduler i get the following error in the log file
. 2015-10-08 14:01:20.669 Reading private key file "Privatekey.ppk"
. 2015-10-08 14:01:20.669 Unable to use this key file (unable to open file)
! 2015-10-08 14:01:20.669 Unable to use key file "Privatekey.ppk" (unable to open file)
! 2015-10-08 14:01:20.669 Using username "username".
. 2015-10-08 14:01:20.810 Prompt (password, "SSH password", <no instructions>, "&Password: ")
. 2015-10-08 14:01:30.841 Disconnected: Unable to authenticate
Any help would be appreciated,
Legionnl
i have a batch file with a script in it using WINSCP 5.7.5.
the upload script is quite basic:
open sftp://username@servername:2222 -privatekey=Privatekey.ppk -passphrase=@password lcd E:\Projectdata\projectname\Export\Processed\ put *.txt exit
if i activate the batch file with the serviceaccount used by task scheduler there is no problem.
howeever if i activate it via taskscheduler i get the following error in the log file
. 2015-10-08 14:01:20.669 Reading private key file "Privatekey.ppk"
. 2015-10-08 14:01:20.669 Unable to use this key file (unable to open file)
! 2015-10-08 14:01:20.669 Unable to use key file "Privatekey.ppk" (unable to open file)
! 2015-10-08 14:01:20.669 Using username "username".
. 2015-10-08 14:01:20.810 Prompt (password, "SSH password", <no instructions>, "&Password: ")
. 2015-10-08 14:01:30.841 Disconnected: Unable to authenticate
Any help would be appreciated,
Legionnl