Help me fix this issue" Host is not communicating ..."

Advertisement

earnestinence
Guest

Help me fix this issue" Host is not communicating ..."

Greetings, I'm getting this error while I try to transfer some files.

" Host is not communicating for more than 15 seconds. Still waiting… Warning: Aborting this operation will close connection!"

Note: If the problem repeats, try turning off Optimize connection buffer size.
Warning: Aborting this operating will close connection!

SCP / sFTP
Or please tell me how to down-grade winscp
Please help! this is getting on my nerves.

Reply with quote

Advertisement

martin
Site Admin
martin avatar
Joined:
Posts:
40,587
Location:
Prague, Czechia

Re: Help me fix this issue" Host is not communicating ..."

Please attach a full session log file showing the problem (using the latest version of WinSCP).

Why do you want to downgrade WinSCP? Did the problem start after an upgrade?

To generate the session log file, enable logging, log in to your server and do the operation and only the operation that causes the error. Submit the log with your post as an attachment. Note that passwords and passphrases not stored in the log. You may want to remove other data you consider sensitive though, such as host names, IP addresses, account names or file names (unless they are relevant to the problem). If you do not want to post the log publicly, you can mark the attachment as private.

Reply with quote

martin
Site Admin
martin avatar

Re: Help me fix this issue" Host is not communicating ..."

As you can I see, I never got any response from @earnestinence.
I you want us to investigate your problem, please follow the my instructions above.

Reply with quote

ThisUsernameIsTaken
Guest

Host is not communicationg Error

I have the very same issue (or at least a very similar one). I have to transfer a large amount of files to a server using a SFTP protocol. On the beginning I had the "Host not communicating" issue only once in a while, but it became more frequent and more frequent, until I cannot even login to the server anymore without immediately loosing the connection again and again and again. The log-file I attached contains a few tries to connect to the server.

(Note: I censored user name, port number and the website name in the log file to "User", "No" and "No.com", similar to the passwords that are automatically censored)

Also: I already tried to uninstall and reinstall WinSCP hoping I would come back to a state where it still worked most of the time. Hover, this did not help, but apparently it was never uninstalled 100% since all my setting were kept.
  • sftp_ucla@No.com.log (22.9 KB, Private file)
Description: Log file, contains multiple tries to connect to a server. Connection breaks within seconds

Reply with quote

Advertisement

martin
Site Admin
martin avatar

Re: Host is not communicationg Error

@ThisUsernameIsTaken: In the log I see that you always abort the connection immediately, once you get the timeout message. Did you try waiting a bit? Do you get the error with any folder or only with the /data_ucla? Can you enter that folder with any other SFTP client?

Reply with quote

Advertisement

You can post new topics in this forum