Differences

This shows you the differences between the selected revisions of the page.

2021-09-14		2021-09-14
no summary (194.3.2.235) (hidden) (untrusted)		no summary (194.3.2.235) (hidden) (untrusted)
	Line 1:		Line 1:
-	====== Command-line Options ======	+	oups
-		+
-	===== [[parameters]] Parameters =====	+
-	Parameters for ''[[executables\|winscp.exe]]'' executable:	+
-	<code batch>	+
-	winscp.exe site\|workspace	+
-		+
-	winscp.exe <session_url>[/path/[file]]	+
-	winscp.exe [mysession] [/sessionname=<name>]	+
-	winscp.exe [mysession] [/newinstance]	+
-	winscp.exe [mysession] /edit <path>	+
-	winscp.exe [mysession] /browse[=<file>]	+
-	winscp.exe [mysession] /synchronize [local_directory] [remote_directory] [/defaults[=secs]]	+
-	winscp.exe [mysession] /keepuptodate [local_directory] [remote_directory] [/defaults[=secs]]	+
-	winscp.exe [mysession] /refresh [path]	+
-	winscp.exe [mysession] /upload file1 file2 file3 ... [/defaults[=secs]]	+
-	winscp.exe [mysession] [/privatekey=<file> [/passphrase=<passphrase>]]	+
-	winscp.exe [mysession] [/hostkey=<fingerprint>]	+
-	winscp.exe [mysession] [/username=<user>] [/password=<pass>]	+
-	winscp.exe [mysession] [/clientcert=<file> [/passphrase=<passphrase>]]	+
-	winscp.exe [mysession] [/certificate=<fingerprint>]	+
-	winscp.exe [mysession] [/passive[=on\|off]] [/implicit\|explicit]	+
-	winscp.exe [mysession] [/timeout=<sec>]	+
-	winscp.exe [mysession] [/rawsettings setting1=value1 setting2=value2 ...]	+
-	winscp.exe [/console] [/script=<script_file>] [/command command1 command2 ...]	+
-	[/parameter // param1 ...]	+
-	winscp.exe [/log=<logfile> [/loglevel=<level>] [/logsize=[<count>*]<size>]]	+
-	[/xmllog=<logfile> [/xmlgroups]]	+
-	winscp.exe [/ini=<inifile>]	+
-	winscp.exe [/rawconfig config1=value1 config2=value2 ...]	+
-	winscp.exe [/rawtransfersettings setting1=value1 setting2=value2 ...]	+
-	winscp.exe /batchsettings <site_mask> setting1=value1 setting2=value2 ...	+
-	winscp.exe /keygen keyfile [/output=<file>] [/changepassphrase] [/comment=<text>]	+
-	winscp.exe /update	+
-	winscp.exe /info	+
-	winscp.exe /help	+
-	</code>	+
-		+
-	Parameters for ''[[executables\|winscp.com]]'' executable:	+
-	<code batch>	+
-	winscp.com [/script=script_file] [/command command1 command2 ...]	+
-	[/parameter // param1 ...]	+
-	winscp.com [/stdout[=binary\|chunked]] [/stdin]	+
-	winscp.com [/log=<logfile> [/loglevel=<level>] [/logsize=[<count>*]<size>]]	+
-	[/xmllog=<logfile> [/xmlgroups]] [/nointeractiveinput]	+
-	winscp.com [/ini=<inifile>]	+
-	winscp.com [/rawconfig config1=value1 config2=value2 ...]	+
-	winscp.com /batchsettings <site_mask> setting1=value1 setting2=value2 ...	+
-	winscp.com /keygen keyfile [/output=<file>] [/changepassphrase] [/comment=<text>]	+
-	winscp.exe /info	+
-	winscp.com /help	+
-	</code>	+
-		+
-	==== [[session]] Session ====	+
-	The first syntax opens the [[session_configuration#site\|site]]. To open site, stored in folder, use path syntax "folder/site". You can also open [[workspace\|workspace]] or all sites in site folder.	+
-		+
-	The second creates the session specified by [[session_url\|session URL]] and optionally by initial remote path. If the remote path is not ended by slash (''/''), it is treated as path to file (or even directory) that should be [[task_download#url\|downloaded]].	+
-		+
-	The parameter ''/==sessionname=='' specifies a custom name of the session to be used instead of the automatically generated name in a format ''username@hostname'' or to override the name of the saved site.	+
-		+
-	If there's already idle WinSCP instance running, the session(s) opens in the existing instance. To force session open in new instance of WinSCP, use ''/==newinstance=='' parameter.	+
-		+
-	The parameter ''/privatekey'' specifies a [[local_path\|local path]] to an [[public_key#private\|SSH private key file]]. If the key file is encrypted, use the ''/passphrase'' to specify its passphrase.	+
-		+
-	The parameter ''/hostkey'' specifies the fingerprint of the expected SSH host key (or several alternative fingerprints separated by a semicolon). It makes WinSCP automatically [[ssh_verifying_the_host_key\|accept the host key]] with the fingerprint.	+
-		+
-	You can use the parameters ''/==username=='' and ''/password'' as an alternative way to specify the credentials. The credentials are normally part of the [[session_url\|session URL]]. Using these switches has the advantage of not needing to [[session_url#special\|URL-encode special characters]].	+
-		+
-	The parameter ''/clientcert'' specifies a [[local_path\|local path]] to FTPS or WebDAVS [[tls#client_certificate\|TLS/SSL client certificate]]. If the certificate is encrypted, use the ''/passphrase'' to specify its passphrase.	+
-		+
-	When a FTPS or WebDAVS server [[tls#certificate\|TLS/SSL certificate]] is not trusted (typically a self-signed certificate), use the parameter ''/certificate'' to specify the fingerprint of the untrusted certificate. It makes WinSCP trust the certificate. Several alternative fingerprints can be separated by a semicolon.	+
-		+
-	The parameter ''/passive'' enables a [[ui_login_connection#connection\|passive]] (''=on'') or an active (''=off'') transfer mode ([[FTP]] protocol only).	+
-		+
-	The parameters ''/implicit'', and ''/explicit'' enable respective [[ftps#methods\|method of invoking FTPS]].	+
-		+
-	The parameter ''/timeout'' specifies [[ui_login_connection#timeout\|server response timeout]].	+
-		+
-	The parameter ''/==rawsettings=='' allows configuring any site settings [[rawsettings\|using raw format as in an INI file]]. E.g. to enable an SSH compression and an agent forwarding, use ''/rawsettings Compression=1 AgentFwd=1''. The parameter must come after the session URL (if any).	+
-		+
-	When using [[scripting]], use the ''[[scriptcommand_open\|open]]'' command (and its switches) instead.	+
-		+
-	Examples:	+
-		+
-	<code batch>	+
-	winscp.exe "My site"	+
-	winscp.exe sftp://martin:password@example.com/ /hostkey="ssh-rsa 2048 xxxxxxxxxxx...="	+
-	winscp.exe scp://test@example.com:2222/ /privatekey=mykey.ppk	+
-	winscp.exe ftps://martin:password@example.com/	+
-	</code>	+
-		+
-	==== [[logging]] Logging ====	+
-		+
-	With ''/log'' parameter you may turn on [[logging\|session logging]] to file specified by [[local_path\|local path]]. In the path you can use the same patterns as in the [[ui_pref_logging#session_log\|logging preferences]].	+
-		+
-	Use parameter ''/==loglevel=='' to change logging level. The value can be in range ''-1''...''2'' (for //Reduced//, //Normal//, //Debug 1// and //Debug 2// logging levels respectively). Append additional '''' to enable password logging (e.g. ''/loglevel=2'').((Append ''*-'' to disable password logging.))	+
-		+
-	Use parameter ''/==logsize=='' to configure log file size limit and log file rotation. Specify maximum size in bytes, optionally with ''K'', ''M'' or ''G'' units. Optionally you can limit number of archived log files using ''count'' prefix. For example ''/logsize=510M'' will limit log file size to 10 MB and will allow up to 5 archived logs.	+
-		+
-	<code batch>	+
-	winscp.exe sftp://martin@example.com/ /log="C:\winscp.log" /loglevel=0	+
-	</code>	+
-		+
-	With ''/xmllog'' parameter you may turn on [[logging_xml\|XML logging]] to file specified by local path. ((For backward compatibility, XML logging can also be enabled using ''/log'' parameter with filename ending with ''.xml'' extension.)) In the path you can use the same patterns as in the [[ui_pref_logging#session_log\|logging preferences]].	+
-		+
-	Use parameter ''/xmlgroups'' along with ''/xmllog'', to [[logging_xml#group\|group]] all XML log elements belonging to the same command under parent ''group'' element.	+
-		+
-		+
-	==== [[scripting]] Console/scripting mode ====	+
-	Parameter ''/console'' executes WinSCP in [[scripting\|console (scripting) mode]]. Note that when using ''[[executables\|winscp.com]]'', the console mode is implicit, so using ''/console'' parameter is redundant.	+
-		+
-	To run batch script either pass script file using ''/script'' parameter or specify the commands directly on command line using ''/command''. In the latter case each following parameter is treated as single command. See [[#syntax\|syntax section]] and examples below for details how to deal with spaces and double-quotes.	+
-		+
-	If both ''/script'' and ''/command'' parameters are used, commands from script file are executed first. When the last command is not ''[[scriptcommand_exit\|exit]]'', regular non-batch mode follows.	+
-		+
-	Use parameter ''/parameter'' to specify list of arguments to be [[scripting#arguments\|passed to script]]. It is recommended to escape the arguments with [[#syntax\|''//'' switch]].	+
-		+
-	With ''[[executables\|winscp.exe]]'', if ''/console'' parameter is not used along with ''/script'' or ''/command'', the script/command is executed without visual feedback (window).	+
-		+
-	Use the parameter ''/==stdout=='' to enable streaming files to the [[executables#redirection\|standard output of ''winscp.com'']]. When the parameter is used, the [[scriptcommand_get\|''get'' command]] will stream the downloaded file(s) to the standard output, when ''-'' is used as a download target. By default (or with the ''binary'' flag), the files are streamed unmodified. With the ''chunked'' flag, the files are individually encoded using [[https://en.wikipedia.org/wiki/Chunked_transfer_encoding\|Chunked transfer encoding]], what allows separating contents of multiple streamed files. When the parameter is used, all console output that would normally be printed to the standard output is redirected to the error output. Streaming is supported with the [[sftp\|SFTP protocol]] only.	+
-		+
-	Use the parameter ''/==stdin=='' to enable streaming files from the [[executables#redirection\|standard input of ''winscp.com'']]. When the parameter is used, the [[scriptcommand_put\|''put'' command]] will stream the standard input to the remote server, when ''-'' is used as an upload source. Implies [[#nointeractiveinput\|''/nointeractiveinput'']]. Streaming is supported with the SFTP protocol only.	+
-		+
-	Use parameter ''/==nointeractiveinput=='', when feeding commands to ''[[executables\|winscp.com]]'' using [[executables#redirection\|standard input]], to make sure prompts for anything other than commands (such as password prompts) are cancelled. Also prevents error message popping up when fatal error occurs while starting WinSCP. When combined with ''/xmllog'' the fatal error is recorded in the %%XML%% log.	+
-		+
-	Examples: <code batch>	+
-	winscp.com /script="C:\Users\martin\Documents\myscript.txt"	+
-	winscp.com /command "open sftp://martin@example.com/ -hostkey=""ssh-rsa 2048 xxxx...=""" "exit"	+
-	winscp.exe /console /script="myscript.txt" /log="myscript.log"	+
-	</code>	+
-		+
-	You can have WinSCP [[ui_generateurl\|generate a scripting command-line for you]].	+
-		+
-	==== [[operations]] Operations ====	+
-	The following parameters can be used to create a shortcut that initiates operation in GUI mode. They are not intended for automation, for that see [[scripting]].	+
-		+
-	Use ''/==edit=='' to open a remote file in WinSCP [[ui_editor\|internal editor]].	+
-		+
-	Use ''/browse'' to select the specified file in (both) [[ui_file_panel\|file panel(s)]]. The switch can also be used together with a [[session_url#file\|file URL]] for the same effect, overriding the default [[task_download#url\|download action]].	+
-		+
-	With ''/==synchronize=='' or ''/keepuptodate'' parameter WinSCP performs //Synchronize// or //Keep remote directory up to date// commands respectively on the specified session and directories. A dialog to set options is displayed first.	+
-		+
-	With ''/upload'' parameter WinSCP uploads specified files to initial remote directory of session.((Parameter is primarily intended to allow [[integration#send_to\|Windows File Explorer's 'Send To' menu]] integration.)) A dialog to set options is displayed first.	+
-		+
-	Use ''/defaults'' parameter along with ''/upload'', ''/synchronize'' or ''/keepuptodate'' to skip the settings dialog and start the operation straight away with default settings. Alternatively you can specify a number of seconds, to actually show the settings dialogs, but have them automatically submit after the specified time elapses.	+
-		+
-	Use the ''/refresh'' parameter to reload remote panel of all running instances of WinSCP. If a session is specified on command-line, only instances that have that session as active are refreshed. If a path is specified after the ''/refresh'', only that directory is refreshed.	+
-		+
-	It is recommended to escape the arguments with [[#syntax\|// switch]].	+
-		+
-	Example: <code batch>	+
-	winscp.exe /defaults /synchronize // "C:\Users\martin\Documents\MySite" /home/martin/public_html	+
-	</code>	+
-		+
-	==== [[configuration]] Configuration ====	+
-	With ''/ini'' parameter you may specify [[local_path\|local path]] to [[config\|configuration INI file]]. It effectively disables using registry as [[config\|configuration storage]]. If the file does not exist, default configuration will be used and the file will be created.	+
-		+
-	<code batch>	+
-	winscp.exe /ini="C:\Users\martin\Documents\myconfig.ini"	+
-	</code>	+
-		+
-	Use ''nul'' instead of path to force WinSCP start with its [[config#no\|default configuration and not save the configuration on exit]].	+
-		+
-	With ''/==rawconfig=='' parameter you can set any configuration settings [[rawconfig\|using raw format as in an INI file]]. E.g. to configure an external IP address use ''/rawconfig Interface\ExternalIpAddress=198.51.100.10''. The parameter must come after a session URL (if any). The configuration set this way is preserved.	+
-		+
-	With ''/==rawtransfersettings=='' you can set any transfer settings [[rawtransfersettings\|using raw format as in an INI file]]. E.g. to enable preserving of directory timestamps, use ''/rawtransfersettings PreserveTimeDirs=1''. The configuration set this way is preserved. In [[scripting]], it is better to use ''-rawtransfersettings'' switch of individual scripting commands, like ''get'', ''put'', etc.	+
-		+
-	==== [[batchsettings]] Mass-modification of sites ====	+
-		+
-	Use ''/batchsettings'' to mass-modify stored sites. The first argument is a mask to select sites to modify. Use a syntax of [[file_mask#basic\|basic file masks]]. You can also use [[file_mask#path\|path mask]] to select sites based on their folders. The other arguments define new values for site settings. Use the same syntax as for ''[[commandline#rawsettings\|/rawsettings]]''.	+
-		+
-	For example to configure a proxy for all sites in a "clients" folder, use:	+
-		+
-	<code batch>	+
-	winscp.exe /batchsettings clients/* ProxyMethod=3 ProxyHost=proxy	+
-	</code>	+
-		+
-	==== [[keygen]] Private key conversion and modification ====	+
-		+
-	Use the ''/keygen'' switch to convert [[public_key#private\|private keys]] from other formats to a PuTTY ''.ppk'' format or to change their passphrase or comment.	+
-		+
-	A parameter after the ''/keygen'' switch specifies a path to an input private key file. The input key can be in OpenSSH or ssh.com format (when converting the key to the PuTTY format) or in the PuTTY format (when changing a key passphrase or comment).	+
-		+
-	When converting the key from other format, you need to specify an output key path using the ''/output'' switch. When modifying a PuTTY key, the existing file is overwritten, if ''/output'' is not specified.	+
-		+
-	Use ''/changepassphrase'' switch to change the key passphrase.	+
-		+
-	Use ''/comment'' switch to change the key comment.	+
-		+
-	For example, to convert key ''mykey.pem'' from OpenSSH format to ''mykey.ppk'' in PuTTY format and set its comment:	+
-		+
-	<code batch>	+
-	winscp.com /keygen mykey.pem /output=mykey.ppk /comment="Converted from OpenSSH format"	+
-	</code>	+
-		+
-	To change the passphrase of existing ''mykey.ppk'':	+
-		+
-	<code batch>	+
-	winscp.com /keygen mykey.ppk /changepassphrase	+
-	</code>	+
-		+
-	For a compatibility with *nix ''[[&man_ref(1,puttygen)\|puttygen]]'', the ''-o'', ''-P'' and ''-C'' switches are understood as aliases to ''/output'', ''/changepassphrase'' and ''/comment'' respectively. So, for features supported by WinSCP, you can use the same arguments as for ''puttygen'', just prefixed with ''/keygen'':	+
-		+
-	<code batch>	+
-	winscp.com /keygen mykey.pem -o mykey.ppk -c "Converted from OpenSSH format"	+
-	</code>	+
-		+
-		+
-	==== [[auxiliary]] Auxiliary ====	+
-	When run with ''/update'' parameter, WinSCP only checks for its [[updates\|updates]].	+
-		+
-	The parameter ''/==info=='' lists the supported [[ssh_algorithms\|SSH]] and [[tls_ciphersuites\|TLS/SSL algorithms]].	+
-		+
-	Parameter ''/help'' shows usage (overview similar to this).	+
-		+
-	===== [[syntax]] Syntax =====	+
-	Command-line parameters that include space(s) must be surrounded by double-quotes:	+
-	<code batch>	+
-	winscp.exe /ini="C:\Users\martin\Documents\myconfig.ini"	+
-	</code>	+
-		+
-	To use the double-quote as a literal, use two double-quotes sequentially. For example, the ''/command'' expects that each script command is surrounded by double quotes, so that it is passed as a single command-line argument. In addition, any script command argument that includes spaces is expected to be surrounded by double-quotes within the command (see [[scripting#quotes\|doubling double-quotes]]):	+
-	<code batch>	+
-	winscp.com /command "open sftp://... -hostkey=""ssh-rsa ...""" "put ""C:\my file.dat"""	+
-	<- Script command 1 -> <- Script command 2 ->	+
-	</code>	+
-		+
-	When executing such command from PowerShell, you additionally have to escape the doubled inner double-quotes with ''`'' (backtick) to prevent PowerShell from interpreting them on its own:((Alternative way is using single quotes instead of outer double quotes.))	+
-		+
-	<code batch>	+
-	winscp.com /command "open sftp://... -hostkey=`"`"ssh-rsa ...`"`"" "put `"`"C:\my file.dat`"`""	+
-	<- Script command 1 -> <- Script command 2 ->	+
-	</code>	+
-		+
-		+
-	To debug the quoting, enable session logging on level //Debug 1// (''/loglevel=1''). The log will show how WinSCP understands your command-line.	+
-		+
-	An argument that begins with a slash is considered a switch. To pass a parameter that itself starts with the slash in its syntax (i.e. a remote path like ''/root''), use the special switch ''%%//%%'' (==two slashes==%%)%% before the argument. The switch ''%%//%%'' denotes that all following arguments are not switches. Example:	+
-	<code batch>	+
-	winscp.exe /synchronize // "C:\Users\martin\Documents\MySite" /root	+
-	</code>	+
-		+
-	===== Executables =====	+
-	Learn about two [[executables\|WinSCP executables]], ''winscp.exe'' and ''winscp.com''.	+
-		+
-	===== Hint =====	+
-	If you are going to run WinSCP from command-line often, you may wish to add WinSCP installation directory to [[integration#search_path\|search path]].	+
-		+
-	===== [[bash]] Running from Bash =====	+
-	When running WinSCP from a shell, where ''/switch'' is interpreted as a path, such as Git Bash, use a dash (''-'') instead of the slash (''/'') for switches. For example:	+
-		+
-	<code batch>	+
-	./WinSCP.com -script="myscript.txt" -log="myscript.log"	+
-	</code>	+

Differences

Documentation

Support

Associations

Follow Us