<Try to describe precise steps that lead to the problem (where do you click, what keys do you press, what do you see, etc.)>
<If relevant, consider attaching a session log file or a screenshot)>

WinSCP 5.15.1

Error message:
Error getting name of current remote directory.

Invalid access to memory.

Stack trace:
(0056F065)WinSCP.exe
(0092636E) C5153_3
(009283D6) ____ExceptionHandler
(00925190) __ExceptionHandler
(0007E19F) ntdll.dll
(0006BD81) ntdll.dll.KiUserExceptionDispatcher
(0081AE16) TTerminal::ReadCurrentDirectory
(0081641F) TTerminal::ReactOnCommand
(006CF3BD) TUnixDirView::ChangeDirectory
(006CD812) TUnixDirView::ExecuteParentDirectory
(0044598B) Customdirview::TCustomDirView::Execute
(0044330A) Customdirview::TCustomDirView::DoExecute
(00443F09) Customdirview::TCustomDirView::WMLButtonDblClk
(00278809) Vcl::Controls::TWinControl::WndProc
(002BBAE3) Vcl::Comctrls::TCustomListView::WndProc
(003A346C) System::Classes::_18201
(0003AF19) USER32.dll
(000373E5) USER32.dll
(00016AF8) USER32.dll.CallWindowProcW
(00049AD7) COMCTL32.DLL
(00049B76) COMCTL32.DLL
(00049930) COMCTL32.DLL
(0003AF19) USER32.dll
(000373E5) USER32.dll
(00016AF8) USER32.dll.CallWindowProcW
(0047A29F) Dragdrop::TDragDrop::WndMethod
(003A346C) System::Classes::_18201
(0003AF19) USER32.dll
(000373E5) USER32.dll
(00036C99) USER32.dll
(00036A7B) USER32.dll.DispatchMessageW

(009269D9) C5153_3
(00927FB3) _ReThrowException
(00817EBA) TTerminal::DoChangeDirectory
(0081AE16) TTerminal::ReadCurrentDirectory
(0081641F) TTerminal::ReactOnCommand
(006CF3BD) TUnixDirView::ChangeDirectory
(006CD812) TUnixDirView::ExecuteParentDirectory
(0044598B) Customdirview::TCustomDirView::Execute
(0044330A) Customdirview::TCustomDirView::DoExecute
(00443F09) Customdirview::TCustomDirView::WMLButtonDblClk
(00278809) Vcl::Controls::TWinControl::WndProc
(002BBAE3) Vcl::Comctrls::TCustomListView::WndProc
(003A346C) System::Classes::_18201
(0003AF19) USER32.dll
(000373E5) USER32.dll
(00016AF8) USER32.dll.CallWindowProcW
(00049AD7) COMCTL32.DLL
(00049B76) COMCTL32.DLL
(00049930) COMCTL32.DLL
(0003AF19) USER32.dll
(000373E5) USER32.dll
(00016AF8) USER32.dll.CallWindowProcW
(0047A29F) Dragdrop::TDragDrop::WndMethod
(003A346C) System::Classes::_18201
(0003AF19) USER32.dll
(000373E5) USER32.dll
(00036C99) USER32.dll
(00036A7B) USER32.dll.DispatchMessageW

The problem happens rarely. I cannot reproduce it.

Thanks for your report.
I have sent you an email with a debug version of WinSCP to the address you have used to register on this forum.

<Try to describe precise steps that lead to the problem (where do you click, what keys do you press, what do you see, etc.)>
<If relevant, consider attaching a session log file or a screenshot)>

WinSCP 5.13.7

Error message:
Error getting name of current remote directory.

Invalid access to memory.

Stack trace:
(0056F065)WinSCP.exe
(008BF00E) C5105_0
(008C1076) ____ExceptionHandler
(008BDE30) __ExceptionHandler
(0007E19F) ntdll.dll
(0006BD81) ntdll.dll.KiUserExceptionDispatcher
(007BF84E) TTerminal::ReadCurrentDirectory
(007BAFD7) TTerminal::ReactOnCommand
(0067C593) TUnixDirView::ChangeDirectory
(0067A946) TUnixDirView::ExecuteFile
(0041E64A) Customdirview::TCustomDirView::DoExecute
(0041F21B) Customdirview::TCustomDirView::WMLButtonDblClk
(0025BD51) Vcl::Controls::TWinControl::WndProc
(0029FC7F) Vcl::Comctrls::TCustomListView::WndProc
(0038109C) System::Classes::_18201
(0003AF19) USER32.dll
(000373E5) USER32.dll
(00016AF8) USER32.dll.CallWindowProcW
(00049AD7) COMCTL32.DLL
(00049B76) COMCTL32.DLL
(00049930) COMCTL32.DLL
(0003AF19) USER32.dll
(000373E5) USER32.dll
(00016AF8) USER32.dll.CallWindowProcW
(00443FF7) Dragdrop::TDragDrop::WndMethod
(0038109C) System::Classes::_18201
(0003AF19) USER32.dll
(000373E5) USER32.dll
(00036C99) USER32.dll
(00036A7B) USER32.dll.DispatchMessageW

(008BF679) C5105_0
(008C0C53) _ReThrowException
(007BCA1E) TTerminal::DoChangeDirectory
(007BF84E) TTerminal::ReadCurrentDirectory
(007BAFD7) TTerminal::ReactOnCommand
(0067C593) TUnixDirView::ChangeDirectory
(0067A946) TUnixDirView::ExecuteFile
(0041E64A) Customdirview::TCustomDirView::DoExecute
(0041F21B) Customdirview::TCustomDirView::WMLButtonDblClk
(0025BD51) Vcl::Controls::TWinControl::WndProc
(0029FC7F) Vcl::Comctrls::TCustomListView::WndProc
(0038109C) System::Classes::_18201
(0003AF19) USER32.dll
(000373E5) USER32.dll
(00016AF8) USER32.dll.CallWindowProcW
(00049AD7) COMCTL32.DLL
(00049B76) COMCTL32.DLL
(00049930) COMCTL32.DLL
(0003AF19) USER32.dll
(000373E5) USER32.dll
(00016AF8) USER32.dll.CallWindowProcW
(00443FF7) Dragdrop::TDragDrop::WndMethod
(0038109C) System::Classes::_18201
(0003AF19) USER32.dll
(000373E5) USER32.dll
(00036C99) USER32.dll
(00036A7B) USER32.dll.DispatchMessageW

I know how to reproduce the problem or the problem happens frequently enough. I wish to be contacted by the WinSCP team to help resolving the problem.

<Try to describe precise steps that lead to the problem (where do you click, what keys do you press, what do you see, etc.)>
<If relevant, consider attaching a session log file or a screenshot)>

- connect to sftp
- access terminal, accept new connection
- try ping
- windows loading, error appeared (trying to ctrl+c like), close the window
- navigate to current sftp session, error pop up

WinSCP 5.15.1

Error message:
Error getting name of current remote directory.

Invalid access to memory.

Stack trace:
(FC7EDEEC)WinSCP.exe
(0092636E)
(009283D6)
(00925190)
(0006248E) ntdll.dll
(0000F15E) ntdll.dll.KiUserExceptionDispatcher
(0081AE16)
(0081641F)
(006CF3BD) @TUnixDirView@ChangeDirectory$qqr20System@UnicodeString
(006CD7AD) @TUnixDirView@ExecuteFile$qqrp22Vcl@Comctrls@TListItem
(0044330A)
(004437FF)

(009269D9)
(00927FB3)
(00817EBA)
(0081AE16)
(0081641F)
(006CF3BD) @TUnixDirView@ChangeDirectory$qqr20System@UnicodeString
(006CD7AD) @TUnixDirView@ExecuteFile$qqrp22Vcl@Comctrls@TListItem
(0044330A)
(004437FF)

The problem happens rarely. I cannot reproduce it.

Thanks for your report.
I have sent you an email with a debug version of WinSCP to the address you have used to register on this forum.

<Try to describe precise steps that lead to the problem (where do you click, what keys do you press, what do you see, etc.)>
<If relevant, consider attaching a session log file or a screenshot)>

WinSCP 5.15

Error message:
Не могу получить имя каталога на сервере.

Ошибка доступа к памяти.

Трассировка стека:
(006EF074)WinSCP.exe
(0092627A) C5153_0
(009282E2) ____ExceptionHandler
(0092509C) __ExceptionHandler
(0003EF0E) ntdll.dll.ZwWow64CallFunction64
(0003F68A) ntdll.dll.KiUserExceptionDispatcher
(0081AD22) TTerminal::ReadCurrentDirectory
(0081632B) TTerminal::ReactOnCommand
(006CF395) TUnixDirView::ChangeDirectory
(006CD785) TUnixDirView::ExecuteFile
(004432FE) Customdirview::TCustomDirView::DoExecute
(00443EFD) Customdirview::TCustomDirView::WMLButtonDblClk
(00278809) Vcl::Controls::TWinControl::WndProc
(002BBAE3) Vcl::Comctrls::TCustomListView::WndProc
(003A346C) System::Classes::_18201
(00007E6F) USER32.DLL.CallNextHookEx
(000080CC) USER32.DLL
(00013D90) USER32.DLL.CallWindowProcW
(0003D11F) COMCTL32.DLL.DefSubclassProc
(0003D101) COMCTL32.DLL.DefSubclassProc
(0002B1FC) COMCTL32.DLL
(0003CED0) COMCTL32.DLL
(00007E6F) USER32.DLL.CallNextHookEx
(000080CC) USER32.DLL
(00013D90) USER32.DLL.CallWindowProcW
(0047A277) Dragdrop::TDragDrop::WndMethod
(003A346C) System::Classes::_18201
(00007E6F) USER32.DLL.CallNextHookEx
(000080CC) USER32.DLL
(0000966A) USER32.DLL
(000096DB) USER32.DLL.DispatchMess

I know how to reproduce the problem or the problem happens frequently enough. I wish to be contacted by the WinSCP team to help resolving the problem.

<Try to describe precise steps that lead to the problem (where do you click, what keys do you press, what do you see, etc.)>
<If relevant, consider attaching a session log file or a screenshot)>

WinSCP 5.15

Error message:
Не могу получить имя каталога на сервере.

Ошибка доступа к памяти.

Трассировка стека:
(FFFFF065)
(0092627A) C5153_0
(009282E2) ____ExceptionHandler
(0092509C) __ExceptionHandler
(0007FB8F) ntdll.dll
(0006E762) ntdll.dll.KiUserExceptionDispatcher
(0081AD22) TTerminal::ReadCurrentDirectory
(0081632B) TTerminal::ReactOnCommand
(006CF395) TUnixDirView::ChangeDirectory
(006CD785) TUnixDirView::ExecuteFile
(004432FE) Customdirview::TCustomDirView::DoExecute
(00443EFD) Customdirview::TCustomDirView::WMLButtonDblClk
(00278809) Vcl::Controls::TWinControl::WndProc
(002BBAE3) Vcl::Comctrls::TCustomListView::WndProc
(003A346C) System::Classes::_18201
(000065E0) USER32.DLL
(00006C67) USER32.DLL
(0000B44E) USER32.DLL.CallWindowProcW
(000331A8) COMCTL32.DLL.DefSubclassProc
(0003318A) COMCTL32.DLL.DefSubclassProc
(0002723F) COMCTL32.DLL
(00032F64) COMCTL32.DLL
(000065E0) USER32.DLL
(00006C67) USER32.DLL
(0000B44E) USER32.DLL.CallWindowProcW
(0047A277) Dragdrop::TDragDrop::WndMethod
(003A346C) System::Classes::_18201
(000065E0) USER32.DLL
(00006C67) USER32.DLL
(00006926) USER32.DLL
(0000698C) USER32.DLL.DispatchMessageW

(009268E5) C5153_0
(00927EBF) _ReThrowExcept

The problem happens rarely. I cannot reproduce it.

<Try to describe precise steps that lead to the problem (where do you click, what keys do you press, what do you see, etc.)>
<If relevant, consider attaching a session log file or a screenshot)>

WinSCP 5.15.1

Error message:
Error getting name of current remote directory.

Invalid access to memory.

Stack trace:
(0003F045)
(0092636E) C5153_3
(009283D6) ____ExceptionHandler
(00925190) __ExceptionHandler
(00062496) ntdll.dll
(0000F13E) ntdll.dll.KiUserExceptionDispatcher
(0081AE16) TTerminal::ReadCurrentDirectory
(0081641F) TTerminal::ReactOnCommand
(006CF3BD) TUnixDirView::ChangeDirectory
(006CD812) TUnixDirView::ExecuteParentDirectory
(0044598B) Customdirview::TCustomDirView::Execute
(0044330A) Customdirview::TCustomDirView::DoExecute
(00443F09) Customdirview::TCustomDirView::WMLButtonDblClk
(00278809) Vcl::Controls::TWinControl::WndProc
(002BBAE3) Vcl::Comctrls::TCustomListView::WndProc
(003A346C) System::Classes::_18201
(000152F7) USER32.dll
(00015D35) USER32.dll
(0001FD32) USER32.dll
(0001FD58) USER32.dll.CallWindowProcW
(0047A29F) Dragdrop::TDragDrop::WndMethod
(003A346C) System::Classes::_18201
(000152F7) USER32.dll
(00015D35) USER32.dll
(000167CE) USER32.dll
(00016895) USER32.dll.DispatchMessageW

(009269D9) C5153_3
(00927FB3) _ReThrowException
(00817EBA) TTerminal::DoChangeDirectory
(0081AE16) TTerminal::ReadCurrentDirectory
(0081641F) TTerminal::ReactOnCommand
(006CF3BD) TUnixDirView::ChangeDirectory
(006CD812) TUnixDirView::ExecuteParentDirectory
(0044598B) Customdirview::TCustomDirView::Execute
(0044330A) Customdirview::TCustomDirView::DoExecute
(00443F09) Customdirview::TCustomDirView::WMLButtonDblClk
(00278809

The problem happens rarely. I cannot reproduce it.

Thanks for your report.
I have sent you an email with a debug version of WinSCP to the address you have used to register on this forum.

<Try to describe precise steps that lead to the problem (where do you click, what keys do you press, what do you see, etc.)>
<If relevant, consider attaching a session log file or a screenshot)>

WinSCP 5.15.1

Error message:
Error getting name of current remote directory.

Invalid access to memory.

Stack trace:
(0000F065)
(0092636E) C5153_3
(009283D6) ____ExceptionHandler
(00925190) __ExceptionHandler
(00083FFF) ntdll.dll
(00071931) ntdll.dll.KiUserExceptionDispatcher
(0081AE16) TTerminal::ReadCurrentDirectory
(0081641F) TTerminal::ReactOnCommand
(006CF3BD) TUnixDirView::ChangeDirectory
(006CD812) TUnixDirView::ExecuteParentDirectory
(0044598B) Customdirview::TCustomDirView::Execute
(0044330A) Customdirview::TCustomDirView::DoExecute
(00443F09) Customdirview::TCustomDirView::WMLButtonDblClk
(00278809) Vcl::Controls::TWinControl::WndProc
(002BBAE3) Vcl::Comctrls::TCustomListView::WndProc
(003A346C) System::Classes::_18201
(00045359) USER32.dll
(00036297) USER32.dll
(000357EA) USER32.dll.CallWindowProcW
(0007430F) COMCTL32.DLL
(000743AE) COMCTL32.DLL
(000740AC) COMCTL32.DLL
(00045359) USER32.dll
(00036297) USER32.dll
(000357EA) USER32.dll.CallWindowProcW
(0047A29F) Dragdrop::TDragDrop::WndMethod
(003A346C) System::Classes::_18201
(00045359) USER32.dll
(00036297) USER32.dll
(000353D6) USER32.dll
(000351AB) USER32.dll.DispatchMessageW

(009269D9) C5153_3
(00927FB3) _ReThrowException
(00817EBA) TTerminal::DoChangeDirectory
(0081AE16) TTerminal::ReadCurrentDirectory
(0081641F) TTerminal::ReactOnCommand
(006CF3BD) TUnixDirView::ChangeDirectory
(006CD812) TUnixDirView::ExecuteParentDirectory
(0044598B) Customdirview::TCustomDirView::Execute
(0044330A) Customdirview::TCustomDirView::DoExecute
(00443F09) Customdirview::TCustomDirView::WMLButtonDblClk
(00278809) Vcl::Controls::TWinControl::WndProc
(002BBAE3) Vcl::Comctrls::TCustomListView::WndProc
(003A346C) System::Classes::_18201
(00045359) USER32.dll
(00036297) USER32.dll
(000357EA) USER32.dll.CallWindowProcW
(0007430F) COMCTL32.DLL
(000743AE) COMCTL32.DLL
(000740AC) COMCTL32.DLL
(00045359) USER32.dll
(00036297) USER32.dll
(000357EA) USER32.dll.CallWindowProcW
(0047A29F) Dragdrop::TDragDrop::WndMethod
(003A346C) System::Classes::_18201
(00045359) USER32.dll
(00036297) USER32.dll
(000353D6) USER32.dll
(000351AB) USER32.dll.DispatchMessageW

I know how to reproduce the problem or the problem happens frequently enough. I wish to be contacted by the WinSCP team to help resolving the problem.

<Try to describe precise steps that lead to the problem (where do you click, what keys do you press, what do you see, etc.)>
<If relevant, consider attaching a session log file or a screenshot)>

WinSCP 5.13.6

Error message:
No puedo determinar el nombre del directorio remoto

Acceso a memoria no válido

Traza de la pila:
(0056F065)WinSCP.exe
(008BF022) C5105_0
(008C108A) ____ExceptionHandler
(008BDE44) __ExceptionHandler
(0008341F) ntdll.dll
(000711F1) ntdll.dll.KiUserExceptionDispatcher
(007BF946) TTerminal::ReadCurrentDirectory
(007BB0CF) TTerminal::ReactOnCommand
(0067C697) TUnixDirView::ChangeDirectory
(0067AA4A) TUnixDirView::ExecuteFile
(0041E6C6) Customdirview::TCustomDirView::DoExecute
(0041F297) Customdirview::TCustomDirView::WMLButtonDblClk
(0025BDCD) Vcl::Controls::TWinControl::WndProc
(0029FCFB) Vcl::Comctrls::TCustomListView::WndProc
(00381118) System::Classes::_18201
(00045269) USER32.dll
(000361B7) USER32.dll
(000356FA) USER32.dll.CallWindowProcW
(0007422F) COMCTL32.DLL
(000742CE) COMCTL32.DLL
(00073FCC) COMCTL32.DLL
(00045269) USER32.dll
(000361B7) USER32.dll
(000356FA) USER32.dll.CallWindowProcW
(004440FB) Dragdrop::TDragDrop::WndMethod
(00381118) System::Classes::_18201
(00045269) USER32.dll
(000361B7) USER32.dll
(000352E6) USER32.dll
(000350BB) USER32.dll.DispatchMessageW

(008BF68D) C5105_0
(008C0C67) _ReThrowException
(007BCB16) TTerminal::DoChangeDirectory
(007BF946) TTerminal::ReadCurrentDirectory
(007BB0CF) TTerminal::ReactOnCommand
(0067C697) TUnixDirView::ChangeDirectory
(0067AA4A) TUnixDirView::ExecuteFile
(0041E6C6) Customdirview::TCustomDirView::DoExecute
(0041F297) Customdirview::TCustomDirView::WMLButtonDblClk
(0025BDCD) Vcl::Controls::TWinControl::WndProc
(0029FCFB) Vcl::Comctrls::TCustomListView::WndProc
(00381118) System::Classes::_18201
(00045269) USER32.dll
(000361B7) USER32.dll
(000356FA) USER32.dll.CallWindowProcW
(0007422F) COMCTL32.DLL
(000742CE) COMCTL32.DLL
(00073FCC) COMCTL32.DLL
(00045269) USER32.dll
(000361B7) USER32.dll
(000356FA) USER32.dll.CallWindowProcW
(004440FB) Dragdrop::TDragDrop::WndMethod
(00381118) System::Classes::_18201
(00045269) USER32.dll
(000361B7) USER32.dll
(000352E6) USER32.dll
(000350BB) USER32.dll.DispatchMessageW

The problem happens rarely. I cannot reproduce it.

<Try to describe precise steps that lead to the problem (where do you click, what keys do you press, what do you see, etc.)>
<If relevant, consider attaching a session log file or a screenshot)>

WinSCP 5.13.9

Error message:
Error getting name of current remote directory.

Invalid access to memory.

Stack trace:
(0056F065)WinSCP.exe
(008BFA86) C5105_3
(008C1AEE) ____ExceptionHandler
(008BE8A8) __ExceptionHandler
(0007E19F) ntdll.dll
(0006BD81) ntdll.dll.KiUserExceptionDispatcher
(007C022E) TTerminal::ReadCurrentDirectory
(007BB9B7) TTerminal::ReactOnCommand
(0067CE8F) TUnixDirView::ChangeDirectory
(0067B242) TUnixDirView::ExecuteFile
(0041E6E6) Customdirview::TCustomDirView::DoExecute
(0041F2B7) Customdirview::TCustomDirView::WMLButtonDblClk
(0025BDED) Vcl::Controls::TWinControl::WndProc
(0029FD1B) Vcl::Comctrls::TCustomListView::WndProc
(00381138) System::Classes::_18201
(0003AF19) USER32.dll
(000373E5) USER32.dll
(00016AF8) USER32.dll.CallWindowProcW
(00049AD7) COMCTL32.DLL
(00049B76) COMCTL32.DLL
(00049930) COMCTL32.DLL
(0003AF19) USER32.dll
(000373E5) USER32.dll
(00016AF8) USER32.dll.CallWindowProcW
(00444093) Dragdrop::TDragDrop::WndMethod
(00381138) System::Classes::_18201
(0003AF19) USER32.dll
(000373E5) USER32.dll
(00036C99) USER32.dll
(00036A7B) USER32.dll.DispatchMessageW

(008C00F1) C5105_3
(008C16CB) _ReThrowException
(007BD3FE) TTerminal::DoChangeDirectory
(007C022E) TTerminal::ReadCurrentDirectory
(007BB9B7) TTerminal::ReactOnCommand
(0067CE8F) TUnixDirView::ChangeDirectory
(0067B242) TUnixDirView::ExecuteFile
(0041E6E6) Customdirview::TCustomDirView::DoExecute
(0041F2B7) Customdirview::TCustomDirView::WMLButtonDblClk
(0025BDED) Vcl::Controls::TWinControl::WndProc
(0029FD1B) Vcl::Comctrls::TCustomListView::WndProc
(00381138) System::Classes::_18201
(0003AF19) USER32.dll
(000373E5) USER32.dll
(00016AF8) USER32.dll.CallWindowProcW
(00049AD7) COMCTL32.DLL
(00049B76) COMCTL32.DLL
(00049930) COMCTL32.DLL
(0003AF19) USER32.dll
(000373E5) USER32.dll
(00016AF8) USER32.dll.CallWindowProcW
(00444093) Dragdrop::TDragDrop::WndMethod
(00381138) System::Classes::_18201
(0003AF19) USER32.dll
(000373E5) USER32.dll
(00036C99) USER32.dll
(00036A7B) USER32.dll.DispatchMessageW

The problem happens rarely. I cannot reproduce it.

Thanks for your report.
I have sent you an email with a debug version of WinSCP to the address you have used to register on this forum.

<Try to describe precise steps that lead to the problem (where do you click, what keys do you press, what do you see, etc.)>
<If relevant, consider attaching a session log file or a screenshot)>

WinSCP 5.13.8

Error message:
Error getting name of current remote directory.

Invalid access to memory.

Stack trace:
(002FF030)WinSCP.exe
(008BF99A) C5105_3
(008C1A02) ____ExceptionHandler
(008BE7BC) __ExceptionHandler
(0003EF0E) ntdll.dll.ZwWow64CallFunction64
(0003F68A) ntdll.dll.KiUserExceptionDispatcher
(007C0142) TTerminal::ReadCurrentDirectory
(007BB8CB) TTerminal::ReactOnCommand
(0067CDA3) TUnixDirView::ChangeDirectory
(0067B1BA) TUnixDirView::ExecuteParentDirectory
(00420C64) Customdirview::TCustomDirView::Execute
(0041E64A) Customdirview::TCustomDirView::DoExecute
(0041F21B) Customdirview::TCustomDirView::WMLButtonDblClk
(0025BD51) Vcl::Controls::TWinControl::WndProc
(0029FC7F) Vcl::Comctrls::TCustomListView::WndProc
(0038109C) System::Classes::_18201
(00007E6F) USER32.DLL.CallNextHookEx
(000080CC) USER32.DLL
(00013D90) USER32.DLL.CallWindowProcW
(0003D11F) COMCTL32.DLL.DefSubclassProc
(0003D101) COMCTL32.DLL.DefSubclassProc
(0002B1FC) COMCTL32.DLL
(0003CED0) COMCTL32.DLL
(00007E6F) USER32.DLL.CallNextHookEx
(000080CC) USER32.DLL
(00013D90) USER32.DLL.CallWindowProcW
(00443FF7) Dragdrop::TDragDrop::WndMethod
(0038109C) System::Classes::_18201
(00007E6F) USER32.DLL.CallNextHookEx
(000080CC) USER32.DLL
(0000966A) USER32.DLL
(000096DB) USER32.DLL.DispatchMessageW

(008C0005) C5105_3
(008C15DF) _ReThrowException
(007BD312) TTerminal::DoChangeDirectory
(007C0142) TTerminal::ReadCurrentDirectory
(007BB8CB) TTerminal::ReactOnCommand
(0067CDA3)%2

I know how to reproduce the problem or the problem happens frequently enough. I wish to be contacted by the WinSCP team to help resolving the problem.

<Try to describe precise steps that lead to the problem (where do you click, what keys do you press, what do you see, etc.)>
<If relevant, consider attaching a session log file or a screenshot)>

WinSCP 5.13.8

Error message:
Не могу получить имя каталога на сервере.

Ошибка доступа к памяти.

Трассировка стека:
(0051F045)WinSCP.exe
(008BF99A) C5105_3
(008C1A02) ____ExceptionHandler
(008BE7BC) __ExceptionHandler
(0005A466) ntdll.dll
(0000F12E) ntdll.dll.KiUserExceptionDispatcher
(007C0142) TTerminal::ReadCurrentDirectory
(007BB8CB) TTerminal::ReactOnCommand
(0067CDA3) TUnixDirView::ChangeDirectory
(0067B1BA) TUnixDirView::ExecuteParentDirectory
(00420C64) Customdirview::TCustomDirView::Execute
(0041E64A) Customdirview::TCustomDirView::DoExecute
(0041F21B) Customdirview::TCustomDirView::WMLButtonDblClk
(0025BD51) Vcl::Controls::TWinControl::WndProc
(0029FC7F) Vcl::Comctrls::TCustomListView::WndProc
(0038109C) System::Classes::_18201
(000152F7) USER32.dll
(00015D35) USER32.dll
(0001FD22) USER32.dll
(0001FD48) USER32.dll.CallWindowProcW
(00443FF7) Dragdrop::TDragDrop::WndMethod
(0038109C) System::Classes::_18201
(000152F7) USER32.dll
(00015D35) USER32.dll
(000167BF) USER32.dll
(00016885) USER32.dll.DispatchMessageW

(008C0005) C5105_3
(008C15DF) _ReThrowException
(007BD312) TTerminal::DoChangeDirectory
(007C0142) TTerminal::ReadCurrentDirectory
(007BB8CB) TTerminal::ReactOnC

The problem happens rarely. I cannot reproduce it.

Thanks for your report.
I have sent you an email with a debug version of WinSCP to the address you have used to register on this forum.

<Try to describe precise steps that lead to the problem (where do you click, what keys do you press, what do you see, etc.)>
<If relevant, consider attaching a session log file or a screenshot)>

WinSCP 5.13.7

Error message:
Error getting name of current remote directory.

Invalid access to memory.

Stack trace:
(FFFFEFFF)WinSCP.exe
(008BF00E) C5105_0
(008C1076) ____ExceptionHandler
(008BDE30) __ExceptionHandler
(0007E19F) ntdll.dll
(0006BD81) ntdll.dll.KiUserExceptionDispatcher
(007BF84E) TTerminal::ReadCurrentDirectory
(007BAFD7) TTerminal::ReactOnCommand
(007BC292) TTerminal::SetCurrentDirectoryW
(0067BEAA) TUnixDirView::SetPath
(0001B6D9) TCustomScpExplorerForm::DoOpenDirectoryDialog
(00046D40) TScpCommanderForm::DoOpenDirectoryDialog
(00015963) TCustomScpExplorerForm::OpenDirectory
(003C31E0) System::Actions::TContainedActionList::ExecuteAction
(001A8FC1) Vcl::Actnlist::TCustomAction::Execute
(0046A4EE) Tb2item::TTBPopupMenu::IsShortCut

(008BF679) C5105_0
(008C0C53) _ReThrowException
(007BCA1E) TTerminal::DoChangeDirectory
(007BF84E) TTerminal::ReadCurrentDirectory
(007BAFD7) TTerminal::ReactOnCommand
(007BC292) TTerminal::SetCurrentDirectoryW
(0067BEAA) TUnixDirView::SetPath
(0001B6D9) TCustomScpExplorerForm::DoOpenDirectoryDialog
(00046D40) TScpCommanderForm::DoOpenDirectoryDialog
(00015963) TCustomScpExplorerForm::OpenDirectory
(003C31E0) System::Actions::TContainedActionList::ExecuteAction
(001A8FC1) Vcl::Actnlist::TCustomAction::Execute
(0046A4EE) Tb2item::TTBPopupMenu::IsShortCut

I know how to reproduce the problem or the problem happens frequently enough. I wish to be contacted by the WinSCP team to help resolving the problem.

Thanks for your report.
I have sent you an email with a debug version of WinSCP to the address you have used to register on this forum.

<Try to describe precise steps that lead to the problem (where do you click, what keys do you press, what do you see, etc.)>
<If relevant, consider attaching a session log file or a screenshot)>

WinSCP 5.13.5

Error message:
Не могу получить имя каталога на сервере.

Ошибка доступа к памяти.

Трассировка стека:
(0051F045)WinSCP.exe
(008BED3E) C5105_0
(008C0DA6) ____ExceptionHandler
(008BDB60) __ExceptionHandler
(0006248E) ntdll.dll
(0000F15E) ntdll.dll.KiUserExceptionDispatcher
(007BF662) TTerminal::ReadCurrentDirectory
(007BADEB) TTerminal::ReactOnCommand
(0067C3BF) TUnixDirView::ChangeDirectory
(0067A772) TUnixDirView::ExecuteFile
(0041E48E) Customdirview::TCustomDirView::DoExecute
(0041F05F) Customdirview::TCustomDirView::WMLButtonDblClk
(0025BB95) Vcl::Controls::TWinControl::WndProc
(0029FAC3) Vcl::Comctrls::TCustomListView::WndProc
(00380EE0) System::Classes::_18201
(000152F7) USER32.dll
(00015D35) USER32.dll
(0001FD3A) USER32.dll
(0001FD60) USER32.dll.CallWindowProcW
(00443E23) Dragdrop::TDragDrop::WndMethod
(00380EE0) System::Classes::_18201
(000152F7) USER32.dll
(00015D35) USER32.dll
(000167BF) USER32.dll
(00016885) USER32.dll.DispatchMessageW

(008BF3A9) C5105_0
(008C0983) _ReThrowException
(007BC832) TTerminal::DoChangeDirectory
(007BF662) TTerminal::ReadCurrentDirectory
(007BADEB) TTerminal::ReactOnCommand
(0067C3BF) TUnixDirView::ChangeDirectory
(0067A772%

I know how to reproduce the problem or the problem happens frequently enough. I wish to be contacted by the WinSCP team to help resolving the problem.

Thanks for your report.
I have sent you an email with a debug version of WinSCP to the address you have used to register on this forum.

<Try to describe precise steps that lead to the problem (where do you click, what keys do you press, what do you see, etc.)>
<If relevant, consider attaching a session log file or a screenshot)>

WinSCP 5.13.2

Error message:
Error getting name of current remote directory.

Invalid access to memory.

Stack trace:
(0035F065)WinSCP.exe
(008BC642)
(008BE6AA)
(008BB464)
(0005A466) ntdll.dll
(0000F12E) ntdll.dll.KiUserExceptionDispatcher
(007BD36A)
(007B8AF3)
(0067A47B) @TUnixDirView@ChangeDirectory$qqr20System@UnicodeString
(006789B6) @TUnixDirView@ExecuteParentDirectory$qqrv
(0041FD74)
(0041D75A)
(0041E32B)
(0025AEE1)
(0029EE0F)
(0038022C)
(000152F7) USER32.dll
(00015D35) USER32.dll
(0001FD22) USER32.dll
(0001FD48) USER32.dll.CallWindowProcW
(004430CF)
(0038022C)
(000152F7) USER32.dll
(00015D35) USER32.dll
(000167BF) USER32.dll
(00016885) USER32.dll.DispatchMessageW

(008BCCAD)
(008BE287)
(007BA53A)
(007BD36A)
(007B8AF3)
(0067A47B) @TUnixDirView@ChangeDirectory$qqr20System@UnicodeString
(006789B6) @TUnixDirView@ExecuteParentDirectory$qqrv
(0041FD74)
(0041D75A)
(0041E32B)
(0025AEE1)
(0029EE0F)
(0038022C)
(000152F7) USER32.dll
(00015D35) USER32.dll
(0001FD22) USER32.dll
(0001FD48) USER32.dll.CallWindowProcW
(004430CF)
(0038022C)
(000152F7) USER32.dll
(00015D35) USER32.dll
(000167BF) USER32.dll
(00016885) USER32.dll.DispatchMessageW

I know how to reproduce the problem or the problem happens frequently enough. I wish to be contacted by the WinSCP team to help resolving the problem.

<Try to describe precise steps that lead to the problem (where do you click, what keys do you press, what do you see, etc.)>
<If relevant, consider attaching a session log file or a screenshot)>

WinSCP 5.13.4

Error message:
External exception C000001D

Stack trace:
(001FF045) Vcl::Graphics::_16695
(0006248E) ntdll.dll
(0000F15E) ntdll.dll.KiUserExceptionDispatcher
(007BE6AE) TTerminal::ReadCurrentDirectory
(007B9E37) TTerminal::ReactOnCommand
(0067B43B) TUnixDirView::ChangeDirectory
(00679912) TUnixDirView::ExecuteFile
(0041E2C6) Customdirview::TCustomDirView::DoExecute
(0041EE97) Customdirview::TCustomDirView::WMLButtonDblClk
(0025B9D5) Vcl::Controls::TWinControl::WndProc
(0029F903) Vcl::Comctrls::TCustomListView::WndProc
(00380D20) System::Classes::_18201
(000152F7) USER32.dll
(00015D35) USER32.dll
(0001FD3A) USER32.dll
(0001FD60) USER32.dll.CallWindowProcW
(00443C3B) Dragdrop::TDragDrop::WndMethod
(00380D20) System::Classes::_18201
(000152F7) USER32.dll
(00015D35) USER32.dll
(000167BF) USER32.dll
(00016885) USER32.dll.DispatchMessageW

The problem happens rarely. I cannot reproduce it.

<Try to describe precise steps that lead to the problem (where do you click, what keys do you press, what do you see, etc.)>
<If relevant, consider attaching a session log file or a screenshot)>

WinSCP 5.13.5

Error message:
Error getting name of current remote directory.

Invalid access to memory.

Stack trace:
(006BF06C)WinSCP.exe
(008BED3E) C5105_0
(008C0DA6) ____ExceptionHandler
(008BDB60) __ExceptionHandler
(00083FFF) ntdll.dll
(00071931) ntdll.dll.KiUserExceptionDispatcher
(007BF662) TTerminal::ReadCurrentDirectory
(007BADEB) TTerminal::ReactOnCommand
(0067C3BF) TUnixDirView::ChangeDirectory
(0067A7D6) TUnixDirView::ExecuteParentDirectory
(00039F4F) TNonVisualDataModule::ExplorerActionsExecute
(003C3024) System::Actions::TContainedActionList::ExecuteAction
(001A8E05) Vcl::Actnlist::TCustomAction::Execute
(00380EE0) System::Classes::_18201
(00045359) USER32.dll
(00036297) USER32.dll
(000353D6) USER32.dll
(000351AB) USER32.dll.DispatchMessageW

(008BF3A9) C5105_0
(008C0983) _ReThrowException
(007BC832) TTerminal::DoChangeDirectory
(007BF662) TTerminal::ReadCurrentDirectory
(007BADEB) TTerminal::ReactOnCommand
(0067C3BF) TUnixDirView::ChangeDirectory
(0067A7D6) TUnixDirView::ExecuteParentDirectory
(00039F4F) TNonVisualDataModule::ExplorerActionsExecute
(003C3024) System::Actions::TContainedActionList::ExecuteAction
(001A8E05) Vcl::Actnlist::TCustomAction::Execute
(00380EE0) System::Classes::_18201
(00045359) USER32.dll
(00036297) USER32.dll
(000353D6) USER32.dll
(000351AB) USER32.dll.DispatchMessageW

The problem happens rarely. I cannot reproduce it.

<Try to describe precise steps that lead to the problem (where do you click, what keys do you press, what do you see, etc.)>
<If relevant, consider attaching a session log file or a screenshot)>

WinSCP 5.13.6

Error message:
Fehler beim Empfang des entfernten Verzeichnisnamens.

Zugriffsverletzung - ungültiger Zugriff auf den Speicher.

Stack trace:
(0056F065)WinSCP.exe
(008BF022) C5105_0
(008C108A) ____ExceptionHandler
(008BDE44) __ExceptionHandler
(00083FFF) ntdll.dll
(00071931) ntdll.dll.KiUserExceptionDispatcher
(007BF946) TTerminal::ReadCurrentDirectory
(007BB0CF) TTerminal::ReactOnCommand
(0067C697) TUnixDirView::ChangeDirectory
(0067AA4A) TUnixDirView::ExecuteFile
(0041E6C6) Customdirview::TCustomDirView::DoExecute
(0041F297) Customdirview::TCustomDirView::WMLButtonDblClk
(0025BDCD) Vcl::Controls::TWinControl::WndProc
(0029FCFB) Vcl::Comctrls::TCustomListView::WndProc
(00381118) System::Classes::_18201
(00045359) USER32.dll
(00036297) USER32.dll
(000357EA) USER32.dll.CallWindowProcW
(000741FF) COMCTL32.dll
(0007429E) COMCTL32.dll
(00073F9C) COMCTL32.dll
(00045359) USER32.dll
(00036297) USER32.dll
(000357EA) USER32.dll.CallWindowProcW
(004440FB) Dragdrop::TDragDrop::WndMethod
(00381118) System::Classes::_18201
(00045359) USER32.dll
(00036297) USER32.dll
(000353D6) USER32.dll
(000351AB) USER32.dll.DispatchMessageW

(008BF68D) C5105_0
(008C0C67) _ReThrowException
(007BCB16) TTerminal::DoChangeDirectory
(007BF946) TTerminal::ReadCurrentDirectory
(007BB0CF) TTerminal::ReactOnCommand
(0067C697) TUnixDirView::ChangeDirectory
(0067AA4A) TUnixDirView::ExecuteFile
(0041E6C6) Customdirview::TCustomDirView::DoExecute
(0041F297) Customdirview::TCustomDirView::WMLButtonDblClk
(0025BDCD) Vcl::Controls::TWinControl::WndProc
(0029FCFB) Vcl::Comctrls::TCustomListView::WndProc
(00381118) System::Classes::_18201
(00045359) USER32.dll
(00036297) USER32.dll
(000357EA) USER32.dll.CallWindowProcW
(000741FF) COMCTL32.dll
(0007429E) COMCTL32.dll
(00073F9C) COMCTL32.dll
(00045359) USER32.dll
(00036297) USER32.dll
(000357EA) USER32.dll.CallWindowProcW
(004440FB) Dragdrop::TDragDrop::WndMethod
(00381118) System::Classes::_18201
(00045359) USER32.dll
(00036297) USER32.dll
(000353D6) USER32.dll
(000351AB) USER32.dll.DispatchMessageW

The problem happens rarely. I cannot reproduce it.

<Try to describe precise steps that lead to the problem (where do you click, what keys do you press, what do you see, etc.)>
<If relevant, consider attaching a session log file or a screenshot)>

WinSCP 5.13.3

Error message:
No puedo determinar el nombre del directorio remoto

Acceso a memoria no válido

Traza de la pila:
(0056F065)WinSCP.exe
(008BCA5A) C5104_0
(008BEAC2) ____ExceptionHandler
(008BB87C) __ExceptionHandler
(0007DABF) ntdll.dll
(0006B6E1) ntdll.dll.KiUserExceptionDispatcher
(007BD51A) TTerminal::ReadCurrentDirectory
(007B8CA3) TTerminal::ReactOnCommand
(0067A5BF) TUnixDirView::ChangeDirectory
(00678AFA) TUnixDirView::ExecuteParentDirectory
(0041FEB8) Customdirview::TCustomDirView::Execute
(0041D89E) Customdirview::TCustomDirView::DoExecute
(0041E46F) Customdirview::TCustomDirView::WMLButtonDblClk
(0025B025) Vcl::Controls::TWinControl::WndProc
(0029EF53) Vcl::Comctrls::TCustomListView::WndProc
(00380370) System::Classes::_18201
(0003AF19) USER32.dll
(000373E5) USER32.dll
(00016AF8) USER32.dll.CallWindowProcW
(00049AD7) COMCTL32.DLL
(00049B76) COMCTL32.DLL
(00049930) COMCTL32.DLL
(0003AF19) USER32.dll
(000373E5) USER32.dll
(00016AF8) USER32.dll.CallWindowProcW
(00443213) Dragdrop::TDragDrop::WndMethod
(00380370) System::Classes::_18201
(0003AF19) USER32.dll
(000373E5) USER32.dll
(00036C99) USER32.dll
(00036A7B) USER32.dll.DispatchMessageW

(008BD0C5) C5104_0
(008BE69F) _ReThrowException
(007BA6EA) TTerminal::DoChangeDirectory
(007BD51A) TTerminal::ReadCurrentDirectory
(007B8CA3) TTerminal::ReactOnCommand
(0067A5BF) TUnixDirView::ChangeDirectory
(00678AFA) TUnixDirView::ExecuteParentDirectory
(0041FEB8) Customdirview::TCustomDirView::Execute
(0041D89E) Customdirview::TCustomDirView::DoExecute
(0041E46F) Customdirview::TCustomDirView::WMLButtonDblClk
(0025B025) Vcl::Controls::TWinControl::WndProc
(0029EF53) Vcl::Comctrls::TCustomListView::WndProc
(00380370) System::Classes::_18201
(0003AF19) USER32.dll
(000373E5) USER32.dll
(00016AF8) USER32.dll.CallWindowProcW
(00049AD7) COMCTL32.DLL
(00049B76) COMCTL32.DLL
(00049930) COMCTL32.DLL
(0003AF19) USER32.dll
(000373E5) USER32.dll
(00016AF8) USER32.dll.CallWindowProcW
(00443213) Dragdrop::TDragDrop::WndMethod
(00380370) System::Classes::_18201
(0003AF19) USER32.dll
(000373E5) USER32.dll
(00036C99) USER32.dll
(00036A7B) USER32.dll.DispatchMessageW

The problem happens rarely. I cannot reproduce it.

<Try to describe precise steps that lead to the problem (where do you click, what keys do you press, what do you see, etc.)>
<If relevant, consider attaching a session log file or a screenshot)>

WinSCP 5.13.4

Error message:
Error getting name of current remote directory.

Invalid access to memory.

Stack trace:
(00256AC9)
(008BDC8E)
(008BFCF6)
(008BCAB0)
(0007DABF) ntdll.dll
(0006B6E1) ntdll.dll.KiUserExceptionDispatcher
(002554A5)
(007E972E)
(007E96BF)
(007BE6AE)
(007B9E37)
(0067B43B) @TUnixDirView@ChangeDirectory$qqr20System@UnicodeString
(00679912) @TUnixDirView@ExecuteFile$qqrp22Vcl@Comctrls@TListItem
(0041E2C6)
(0041EE97)
(0025B9D5)
(0029F903)
(00380D20)
(0003AF19) USER32.dll
(000373E5) USER32.dll
(00016AF8) USER32.dll.CallWindowProcW
(00049AD7) COMCTL32.DLL
(00049B76) COMCTL32.DLL
(00049930) COMCTL32.DLL
(0003AF19) USER32.dll
(000373E5) USER32.dll
(00016AF8) USER32.dll.CallWindowProcW
(00443C3B)
(00380D20)
(0003AF19) USER32.dll
(000373E5) USER32.dll
(00036C99) USER32.dll
(00036A7B) USER32.dll.DispatchMessageW

(008BE2F9)
(008BF8D3)
(007BB87E)
(007BE6AE)
(007B9E37)
(0067B43B) @TUnixDirView@ChangeDirectory$qqr20System@UnicodeString
(00679912) @TUnixDirView@ExecuteFile$qqrp22Vcl@Comctrls@TListItem
(0041E2C6)
(0041EE97)
(0025B9D5)
(0029F903)
(00380D20)
(0003AF19) USER32.dll
(000373E5) USER32.dll
(00016AF8) USER32.dll.CallWindowProcW
(00049AD7) COMCTL32.DLL
(00049B76) COMCTL32.DLL
(00049930) COMCTL32.DLL
(0003AF19) USER32.dll
(000373E5) USER32.dll
(00016AF8) USER32.dll.CallWindowProcW
(00443C3B)
(00380D20)
(0003AF19) USER32.dll
(000373E5) USER32.dll
(00036C99) USER32.dll
(00036A7B) USER32.dll.DispatchMessageW

The problem happens rarely. I cannot reproduce it.

Thanks for your report.
I have sent you an email with a debug version of WinSCP to the address you have used to register on this forum.

<Try to describe precise steps that lead to the problem (where do you click, what keys do you press, what do you see, etc.)>
<If relevant, consider attaching a session log file or a screenshot)>

WinSCP 5.13.5

Error message:
获取当前远程目录名出错。

无效的内存访问。

Stack trace:
(0051F045)WinSCP.exe
(008BED3E) C5105_0
(008C0DA6) ____ExceptionHandler
(008BDB60) __ExceptionHandler
(00045A86) ntdll.dll
(0000F13E) ntdll.dll.KiUserExceptionDispatcher
(007BF662) TTerminal::ReadCurrentDirectory
(007BADEB) TTerminal::ReactOnCommand
(0067C3BF) TUnixDirView::ChangeDirectory
(0067A7D6) TUnixDirView::ExecuteParentDirectory
(00420AA8) Customdirview::TCustomDirView::Execute
(0041E48E) Customdirview::TCustomDirView::DoExecute
(0041F05F) Customdirview::TCustomDirView::WMLButtonDblClk
(0025BB95) Vcl::Controls::TWinControl::WndProc
(0029FAC3) Vcl::Comctrls::TCustomListView::WndProc
(00380EE0) System::Classes::_18201
(000152F7) USER32.dll
(00015D35) USER32.dll
(0001FD22) USER32.dll
(0001FD48) USER32.dll.CallWindowProcW
(00443E23) Dragdrop::TDragDrop::WndMethod
(00380EE0) System::Classes::_18201
(000152F7) USER32.dll
(00015D35) USER32.dll
(000167BF) USER32.dll
(00016885) USER32.dll.DispatchMessageW

(008BF3A9) C5105_0
(008C0983) _ReThrowException
(007BC832) TTerminal::DoChangeDirectory
(007BF662) TTerminal::ReadCurrentDirectory
(007BADEB) TTerminal::ReactOnCommand
(0067C3BF) TUnixDirView::ChangeDirectory
(0067A7D6) TUnixDirView::ExecuteParentDirectory
(00420AA8) Customdirview::TCustomDirView::Execute
(0041E48E) Customdirview::TCustomDirView::DoE

I know how to reproduce the problem or the problem happens frequently enough. I wish to be contacted by the WinSCP team to help resolving the problem.

Thanks for your report.
I have sent you an email with a debug version of WinSCP to the address you have used to register on this forum.

<Try to describe precise steps that lead to the problem (where do you click, what keys do you press, what do you see, etc.)>
<If relevant, consider attaching a session log file or a screenshot)>

WinSCP 5.13.2

Error message:
Error getting name of current remote directory.

Invalid access to memory.

Stack trace:
(000DF061)
(008BC642) C5104_0
(008BE6AA) ____ExceptionHandler
(008BB464) __ExceptionHandler
(0007DABF) ntdll.dll
(0006B6E1) ntdll.dll.KiUserExceptionDispatcher
(007BD36A) TTerminal::ReadCurrentDirectory
(007B8AF3) TTerminal::ReactOnCommand
(0067A47B) TUnixDirView::ChangeDirectory
(006789B6) TUnixDirView::ExecuteParentDirectory
(00039E13) TNonVisualDataModule::ExplorerActionsExecute
(003C2370) System::Actions::TContainedActionList::ExecuteAction
(001A8151) Vcl::Actnlist::TCustomAction::Execute
(0038022C) System::Classes::_18201
(0003AF19) USER32.dll
(000373E5) USER32.dll
(00036C99) USER32.dll
(00036A7B) USER32.dll.DispatchMessageW

(008BCCAD) C5104_0
(008BE287) _ReThrowException
(007BA53A) TTerminal::DoChangeDirectory
(007BD36A) TTerminal::ReadCurrentDirectory
(007B8AF3) TTerminal::ReactOnCommand
(0067A47B) TUnixDirView::ChangeDirectory
(006789B6) TUnixDirView::ExecuteParentDirectory
(00039E13) TNonVisualDataModule::ExplorerActionsExecute
(003C2370) System::Actions::TContainedActionList::ExecuteAction
(001A8151) Vcl::Actnlist::TCustomAction::Execute
(0038022C) System::Classes::_18201
(0003AF19) USER32.dll
(000373E5) USER32.dll
(00036C99) USER32.dll
(00036A7B) USER32.dll.DispatchMessageW

I know how to reproduce the problem or the problem happens frequently enough. I wish to be contacted by the WinSCP team to help resolving the problem.

<Try to describe precise steps that lead to the problem (where do you click, what keys do you press, what do you see, etc.)>
<If relevant, consider attaching a session log file or a screenshot)>


Ajout Commentaire utilisateur:

L'erreur survient lorsque je veux accéder à un répertoire distant via le protocole SFTP3 avec authentification RSA 4096 bits (pour mon cas).
[/quote]L'erreur apparait, je l'ignore et je peux accéder au dossier sélectionné mais elle revient à chaque fois que je veux accéder à un dossier.

L'accès en SSH s'effectue normalement, sans erreur via le logiciel PuTTY.

Serveur utilisé: Raspberry 3B+ sous Raspbian (à jour)
Client utilisé: PC sous Windows 10 Famille 64bits

Fin du Commentaire utilisateur


WinSCP 5.13.4

Error message:
Erreur lors l'établissement du nom du répertoire distant.

Accès mémoire invalide.

Trace de la pile :
(0036F041)WinSCP.exe
(008BDC8E) C5104_3
(008BFCF6) ____ExceptionHandler
(008BCAB0) __ExceptionHandler
(0007DABF) ntdll.dll
(0006B6E1) ntdll.dll.KiUserExceptionDispatcher
(007BE6AE) TTerminal::ReadCurrentDirectory
(007B9E37) TTerminal::ReactOnCommand
(0067B43B) TUnixDirView::ChangeDirectory
(00679912) TUnixDirView::ExecuteFile
(0041E2C6) Customdirview::TCustomDirView::DoExecute
(0041EE97) Customdirview::TCustomDirView::WMLButtonDblClk
(0025B9D5) Vcl::Controls::TWinControl::WndProc
(0029F903) Vcl::Comctrls::TCustomListView::WndProc
(00380D20) System::Classes::_18201
(0003AF19) USER32.dll
(000373E5) USER32.dll
(00016AF8) USER32.dll.CallWindowProcW
(00049AD7) COMCTL32.DLL
(00049B76) COMCTL32.DLL
(00049930) COMCTL32.DLL
(0003AF19) USER32.dll
(000373E5) USER32.dll
(00016AF8) USER32.dll.CallWindowProcW
(00443C3B) Dragdrop::TDragDrop::WndMethod
(00380D20) System::Classes::_18201
(0003AF19) USER32.dll
(000373E5) USER32.dll
(00036C99) USER32.dll
(00036A7B) USER32.dll.DispatchMessageW

(008BE2F9) C5104_3
(008BF8D3) _ReThrowException
(007BB87E) TTerminal::DoChangeDirectory
(007BE6AE) TTerminal::ReadCurrentDirectory
(007B9E37) TTerminal::ReactOnCommand
(0067B43B) TUnixDirView::ChangeDirectory
(00679912) TUnixDirView::ExecuteFile
(0041E2C6) Customdirview::TCustomDirView::DoExecute
(0041EE97) Customdirview::TCustomDirView::WMLButtonDblClk
(0025B9D5) Vcl::Controls::TWinControl::WndProc
(0029F903) Vcl::Comctrls::TCustomListView::WndProc
(00380D20) System::Classes::_18201
(0003AF19) USER32.dll
(000373E5) USER32.dll
(00016AF8) USER32.dll.CallWindowProcW
(00049AD7) COMCTL32.DLL
(00049B76) COMCTL32.DLL
(00049930) COMCTL32.DLL
(0003AF19) USER32.dll
(000373E5) USER32.dll
(00016AF8) USER32.dll.CallWindowProcW
(00443C3B) Dragdrop::TDragDrop::WndMethod
(00380D20) System::Classes::_18201
(0003AF19) USER32.dll
(000373E5) USER32.dll
(00036C99) USER32.dll
(00036A7B) USER32.dll.DispatchMessageW

The problem happens rarely. I cannot reproduce it.

Thanks for your report.
I have sent you an email with a debug version of WinSCP to the address you have used to register on this forum.

<Try to describe precise steps that lead to the problem (where do you click, what keys do you press, what do you see, etc.)>
<If relevant, consider attaching a session log file or a screenshot)>

WinSCP 5.13.4

Error message:
Error getting name of current remote directory.

Invalid access to memory.

Stack trace:
(FFFFF045)
(008BDC8E) C5104_3
(008BFCF6) ____ExceptionHandler
(008BCAB0) __ExceptionHandler
(000624F6) ntdll.dll
(0000F13E) ntdll.dll.KiUserExceptionDispatcher
(007BE6AE) TTerminal::ReadCurrentDirectory
(007B9E37) TTerminal::ReactOnCommand
(0067B43B) TUnixDirView::ChangeDirectory
(00679976) TUnixDirView::ExecuteParentDirectory
(004208E0) Customdirview::TCustomDirView::Execute
(0041E2C6) Customdirview::TCustomDirView::DoExecute
(0041EE97) Customdirview::TCustomDirView::WMLButtonDblClk
(0025B9D5) Vcl::Controls::TWinControl::WndProc
(0029F903) Vcl::Comctrls::TCustomListView::WndProc
(00380D20) System::Classes::_18201
(000152F7) USER32.dll
(00015D35) USER32.dll
(0001FD3A) USER32.dll
(0001FD60) USER32.dll.CallWindowProcW
(00443C3B) Dragdrop::TDragDrop::WndMethod
(00380D20) System::Classes::_18201
(000152F7) USER32.dll
(00015D35) USER32.dll
(000167BF) USER32.dll
(00016885) USER32.dll.DispatchMessageW

(008BE2F9) C5104_3
(008BF8D3) _ReThrowException
(007BB87E) TTerminal::DoChangeDirectory
(007BE6AE) TTerminal::ReadCurrentDirectory
(007B9E37) TTerminal::ReactOnCommand
(0067B43B) TUnixDirView::ChangeDirectory
(00679976) TUnixDirView::ExecuteParentDirectory
(004208E0) Customdirview::TCustomDirView::Execute
(0041E2C6) Customdirview::TCustomDirView::DoExecute
(0041EE97) Customdirview::TCustomDirView::WMLButtonDblClk
(0025B9D5

I know how to reproduce the problem or the problem happens frequently enough. I wish to be contacted by the WinSCP team to help resolving the problem.

<Try to describe precise steps that lead to the problem (where do you click, what keys do you press, what do you see, etc.)>
<If relevant, consider attaching a session log file or a screenshot)>

WinSCP 5.13.3

Error message:
Не могу получить имя каталога на сервере.

Ошибка доступа к памяти.

Трассировка стека:
(0008B480)
(008BCA5A) C5104_0
(008BEAC2) ____ExceptionHandler
(008BB87C) __ExceptionHandler
(0006248E) ntdll.dll
(0000F15E) ntdll.dll.KiUserExceptionDispatcher
(007BD51A) TTerminal::ReadCurrentDirectory
(007B8CA3) TTerminal::ReactOnCommand
(0067A5BF) TUnixDirView::ChangeDirectory
(00678A96) TUnixDirView::ExecuteFile
(0041D89E) Customdirview::TCustomDirView::DoExecute
(0041E46F) Customdirview::TCustomDirView::WMLButtonDblClk
(0025B025) Vcl::Controls::TWinControl::WndProc
(0029EF53) Vcl::Comctrls::TCustomListView::WndProc
(00380370) System::Classes::_18201
(000152F7) USER32.dll
(00015D35) USER32.dll
(0001FD3A) USER32.dll
(0001FD60) USER32.dll.CallWindowProcW
(00443213) Dragdrop::TDragDrop::WndMethod
(00380370) System::Classes::_18201
(000152F7) USER32.dll
(00015D35) USER32.dll
(000167BF) USER32.dll
(00016885) USER32.dll.DispatchMessageW

(008BD0C5) C5104_0
(008BE69F) _ReThrowException
(007BA6EA) TTerminal::DoChangeDirectory
(007BD51A) TTerminal::ReadCurrentDirectory
(007B8CA3) TTerminal::ReactOnCommand
(0067A5BF) TUnixDirView::ChangeDirectory
(00678A96) TUnix

The problem happens rarely. I cannot reproduce it.

Thanks for your report.
I have sent you an email with a debug version of WinSCP to the address you have used to register on this forum.

<Try to describe precise steps that lead to the problem (where do you click, what keys do you press, what do you see, etc.)>
<If relevant, consider attaching a session log file or a screenshot)>

WinSCP 5.13.4

Error message:
Error getting name of current remote directory.

Invalid access to memory.

Stack trace:
(0007F045)
(008BDC8E) C5104_3
(008BFCF6) ____ExceptionHandler
(008BCAB0) __ExceptionHandler
(0006248E) ntdll.dll
(0000F15E) ntdll.dll.KiUserExceptionDispatcher
(007BE6AE) TTerminal::ReadCurrentDirectory
(007B9E37) TTerminal::ReactOnCommand
(0067B43B) TUnixDirView::ChangeDirectory
(00679976) TUnixDirView::ExecuteParentDirectory
(004208E0) Customdirview::TCustomDirView::Execute
(0041E2C6) Customdirview::TCustomDirView::DoExecute
(0041EE97) Customdirview::TCustomDirView::WMLButtonDblClk
(0025B9D5) Vcl::Controls::TWinControl::WndProc
(0029F903) Vcl::Comctrls::TCustomListView::WndProc
(00380D20) System::Classes::_18201
(000152F7) USER32.dll
(00015D35) USER32.dll
(0001FD3A) USER32.dll
(0001FD60) USER32.dll.CallWindowProcW
(00443C3B) Dragdrop::TDragDrop::WndMethod
(00380D20) System::Classes::_18201
(000152F7) USER32.dll
(00015D35) USER32.dll
(000167BF) USER32.dll
(00016885) USER32.dll.DispatchMessageW

(008BE2F9) C5104_3
(008BF8D3) _ReThrowException
(007BB87E) TTerminal::DoChangeDirectory
(007BE6AE) TTerminal::ReadCurrentDirectory
(007B9E37) TTerminal::ReactOnCommand
(0067B43B) TUnixDirView::ChangeDirectory
(00679976) TUnixDirView::ExecuteParentDirectory
(004208E0) Customdirview::TCustomDirView::Execute
(0041E2C6) Customdirview::TCustomDirView::DoExecute
(0041EE97) Customdirview::TCustomDirView::WMLButtonDblClk
(0025B9D5

I know how to reproduce the problem or the problem happens frequently enough. I wish to be contacted by the WinSCP team to help resolving the problem.

adrian.atudor@... wrote:

WinSCP 5.13.4

Error message:
Error getting name of current remote directory.

Invalid access to memory.

Stack trace:
(0003FAB0)
(008BDC8E) C5104_3
(008BFCF6) ____ExceptionHandler
(008BCAB0) __ExceptionHandler
(0007DA8F) ntdll.dll
(0006B6B1) ntdll.dll.KiUserExceptionDispatcher
(007BE6AE) TTerminal::ReadCurrentDirectory
(007B9E37) TTerminal::ReactOnCommand
(0067B43B) TUnixDirView::ChangeDirectory
(00679912) TUnixDirView::ExecuteFile
...

I know how to reproduce the problem or the problem happens frequently enough. I wish to be contacted by the WinSCP team to help resolving the problem.

Thanks for your report.
I have sent you an email with a debug version of WinSCP to the address you have used to register on this forum.

<Try to describe precise steps that lead to the problem (where do you click, what keys do you press, what do you see, etc.)>
<If relevant, consider attaching a session log file or a screenshot)>

WinSCP 5.13.4

Error message:
Erreur lors l'établissement du nom du répertoire distant.

Accès mémoire invalide.

Trace de la pile :
(0007F045)
(008BDC8E) C5104_3
(008BFCF6) ____ExceptionHandler
(008BCAB0) __ExceptionHandler
(0006248E) ntdll.dll
(0000F15E) ntdll.dll.KiUserExceptionDispatcher
(007BE6AE) TTerminal::ReadCurrentDirectory
(007B9E37) TTerminal::ReactOnCommand
(007BB0F2) TTerminal::SetCurrentDirectoryW
(0067AD52) TUnixDirView::SetPath
(00047D76) TScpCommanderForm::RemotePathLabelPathClick
(00415D9D) Pathlabel::TCustomPathLabel::DoPathClick
(00414604) Pathlabel::TCustomPathLabel::Click
(00257891) Vcl::Controls::TControl::WMLButtonUp
(00256ACC) Vcl::Controls::TControl::Perform
(0025B2A3) Vcl::Controls::TWinControl::IsControlMouseMsg
(0025B01C) Vcl::Controls::TWinControl::MainWndProc
(00380D20) System::Classes::_18201
(000152F7) USER32.dll
(00015D35) USER32.dll
(000167BF) USER32.dll
(00016885) USER32.dll.DispatchMessageW

(008BE2F9) C5104_3
(008BF8D3) _ReThrowException
(007BB87E) TTerminal::DoChangeDirectory
(007BE6AE) TTerminal::ReadCurrentDirectory
(007B9E37) TTerminal::ReactOnCommand
(007BB0F2) TTerminal::SetCurrentDirectoryW
(0067AD52) TUnixDirView::SetPath
(00047D76) TScpCommanderForm::RemotePathLabelPathClick
(00415D9D) Pathlabel::TCustomPathLabel::DoPathClick
(00414604) Pathlabel::TCustomPathLabel::Click
(00257891) Vcl::Controls::TControl::WMLButtonUp
(00256ACC) Vcl::Controls::TControl::Perform

The problem happens rarely. I cannot reproduce it.

<Try to describe precise steps that lead to the problem (where do you click, what keys do you press, what do you see, etc.)>
<If relevant, consider attaching a session log file or a screenshot)>

WinSCP 5.13.4

Error message:
Error getting name of current remote directory.

Invalid access to memory.

Stack trace:
(0003FAB0)
(008BDC8E) C5104_3
(008BFCF6) ____ExceptionHandler
(008BCAB0) __ExceptionHandler
(0007DA8F) ntdll.dll
(0006B6B1) ntdll.dll.KiUserExceptionDispatcher
(007BE6AE) TTerminal::ReadCurrentDirectory
(007B9E37) TTerminal::ReactOnCommand
(0067B43B) TUnixDirView::ChangeDirectory
(00679912) TUnixDirView::ExecuteFile
(0041E2C6) Customdirview::TCustomDirView::DoExecute
(0041EE97) Customdirview::TCustomDirView::WMLButtonDblClk
(0025B9D5) Vcl::Controls::TWinControl::WndProc
(0029F903) Vcl::Comctrls::TCustomListView::WndProc
(00380D20) System::Classes::_18201
(0003AE69) USER32.dll
(00037335) USER32.dll
(00016AF8) USER32.dll.CallWindowProcW
(00049AD7) COMCTL32.DLL
(00049B76) COMCTL32.DLL
(00049930) COMCTL32.DLL
(0003AE69) USER32.dll
(00037335) USER32.dll
(00016AF8) USER32.dll.CallWindowProcW
(00443C3B) Dragdrop::TDragDrop::WndMethod
(00380D20) System::Classes::_18201
(0003AE69) USER32.dll
(00037335) USER32.dll
(00036BE9) USER32.dll
(000369CB) USER32.dll.DispatchMessageW

(008BE2F9) C5104_3
(008BF8D3) _ReThrowException
(007BB87E) TTerminal::DoChangeDirectory
(007BE6AE) TTerminal::ReadCurrentDirectory
(007B9E37) TTerminal::ReactOnCommand
(0067B43B) TUnixDirView::ChangeDirectory
(00679912) TUnixDirView::ExecuteFile
(0041E2C6) Customdirview::TCustomDirView::DoExecute
(0041EE97) Customdirview::TCustomDirView::WMLButtonDblClk
(0025B9D5) Vcl::Controls::TWinControl::WndProc
(0029F903) Vcl::Comctrls::TCustomListView::WndProc
(00380D20) System::Classes::_18201
(0003AE69) USER32.dll
(00037335) USER32.dll
(00016AF8) USER32.dll.CallWindowProcW
(00049AD7) COMCTL32.DLL
(00049B76) COMCTL32.DLL
(00049930) COMCTL32.DLL
(0003AE69) USER32.dll
(00037335) USER32.dll
(00016AF8) USER32.dll.CallWindowProcW
(00443C3B) Dragdrop::TDragDrop::WndMethod
(00380D20) System::Classes::_18201
(0003AE69) USER32.dll
(00037335) USER32.dll
(00036BE9) USER32.dll
(000369CB) USER32.dll.DispatchMessageW

I know how to reproduce the problem or the problem happens frequently enough. I wish to be contacted by the WinSCP team to help resolving the problem.

Thanks for your report.
I have sent you an email with a debug version of WinSCP to the address you have used to register on this forum.

<Try to describe precise steps that lead to the problem (where do you click, what keys do you press, what do you see, etc.)>
<If relevant, consider attaching a session log file or a screenshot)>

WinSCP 5.13.3

Error message:
Error getting name of current remote directory.

Invalid access to memory.

Stack trace:
(0009F045)
(008BCA5A) C5104_0
(008BEAC2) ____ExceptionHandler
(008BB87C) __ExceptionHandler
(0006248E) ntdll.dll
(00000EC9) symsrv.dll.crc32
(0000F15E) ntdll.dll.KiUserExceptionDispatcher
(007BD51A) TTerminal::ReadCurrentDirectory
(007B8CA3) TTerminal::ReactOnCommand
(0067DAA6) TCustomUnixDriveView::Change
(00291D0E) Vcl::Comctrls::TCustomTreeView::CNNotify
(00424059) Customdriveview::TCustomDriveView::CNNotify
(0025B025) Vcl::Controls::TWinControl::WndProc
(00291FCA) Vcl::Comctrls::TCustomTreeView::WndProc
(0025B18B) Vcl::Controls::_17076
(0025B025) Vcl::Controls::TWinControl::WndProc
(0025A66C) Vcl::Controls::TWinControl::MainWndProc
(00380370) System::Classes::_18201
(000152F7) USER32.dll
(00015D35) USER32.dll
(00015DE3) USER32.dll
(00015E41) USER32.dll
(0000F137) ntdll.dll.KiUserCallbackDispatcher
(000186C0) USER32.dll.SendMessageW
(0002B06D) COMCTL32.DLL
(000A846F) COMCTL32.DLL
(000A77FB) COMCTL32.DLL
(0004B30B) COMCTL32.DLL
(0004B226) COMCTL32.DLL
(000152F7) USER32.dll
(00015D35) USER32.dll
(0001FD3A) USER32.dll
(0001FD60) USER32.dll.CallWindowProcW
(0025B136) Vcl::Controls::TWinControl::DefaultHandler
(004240A9) Customdriveview::TCustomDriveView::WMLButtonDown
(00380370) System::Classes::_18201
(000152F7) USER32.dll
(00015D35) USER32.dll
(0001FD3A) USER32.dll
(0001FD60) USER32.dll.Ca

I know how to reproduce the problem or the problem happens frequently enough. I wish to be contacted by the WinSCP team to help resolving the problem.

Thanks for your report.
I have sent you an email with a debug version of WinSCP to the address you have used to register on this forum.

<change directory>
<If relevant, consider attaching a session log file or a screenshot)>

WinSCP 5.13.3

Error message:
Error getting name of current remote directory.

Invalid access to memory.

Stack trace:
(0007C6E8)
(008BCA5A) C5104_0
(008BEAC2) ____ExceptionHandler
(008BB87C) __ExceptionHandler
(0007DA8F) ntdll.dll
(0006B6B1) ntdll.dll.KiUserExceptionDispatcher
(007BD51A) TTerminal::ReadCurrentDirectory
(007B8CA3) TTerminal::ReactOnCommand
(0067A5BF) TUnixDirView::ChangeDirectory
(00678AFA) TUnixDirView::ExecuteParentDirectory
(0041FEB8) Customdirview::TCustomDirView::Execute
(0041D89E) Customdirview::TCustomDirView::DoExecute
(0041E46F) Customdirview::TCustomDirView::WMLButtonDblClk
(0025B025) Vcl::Controls::TWinControl::WndProc
(0029EF53) Vcl::Comctrls::TCustomListView::WndProc
(00380370) System::Classes::_18201
(0003AE69) USER32.dll
(00037335) USER32.dll
(00016AF8) USER32.dll.CallWindowProcW
(00049AD7) COMCTL32.DLL
(00049B76) COMCTL32.DLL
(00049930) COMCTL32.DLL
(0003AE69) USER32.dll
(00037335) USER32.dll
(00016AF8) USER32.dll.CallWindowProcW
(00443213) Dragdrop::TDragDrop::WndMethod
(00380370) System::Classes::_18201
(0003AE69) USER32.dll
(00037335) USER32.dll
(00036BE9) USER32.dll
(000369CB) USER32.dll.DispatchMessageW

(008BD0C5) C5104_0
(008BE69F) _ReThrowException
(007BA6EA) TTerminal::DoChangeDirectory
(007BD51A) TTerminal::ReadCurrentDirectory
(007B8CA3) TTerminal::ReactOnCommand
(0067A5BF) TUnixDirView::ChangeDirectory
(00678AFA) TUnixDirView::ExecuteParentDirectory
(0041FEB8) Customdirview::TCustomDirView::Execute
(0041D89E) Customdirview::TCustomDirView::DoExecute
(0041E46F) Customdirview::TCustomDirView::WMLButtonDblClk
(0025B025) Vcl::Controls::TWinControl::WndProc
(0029EF53) Vcl::Comctrls::TCustomListView::WndProc
(00380370) System::Classes::_18201
(0003AE69) USER32.dll
(00037335) USER32.dll
(00016AF8) USER32.dll.CallWindowProcW
(00049AD7) COMCTL32.DLL
(00049B76) COMCTL32.DLL
(00049930) COMCTL32.DLL
(0003AE69) USER32.dll
(00037335) USER32.dll
(00016AF8) USER32.dll.CallWindowProcW
(00443213) Dragdrop::TDragDrop::WndMethod
(00380370) System::Classes::_18201
(0003AE69) USER32.dll
(00037335) USER32.dll
(00036BE9) USER32.dll
(000369CB) USER32.dll.DispatchMessageW

I know how to reproduce the problem or the problem happens frequently enough. I wish to be contacted by the WinSCP team to help resolving the problem.

Thanks for your report.
I have sent you an email with a debug version of WinSCP to the address you have used to register on this forum.

<Try to describe precise steps that lead to the problem (where do you click, what keys do you press, what do you see, etc.)>
<If relevant, consider attaching a session log file or a screenshot)>

WinSCP 5.13.2

Error message:
Error getting name of current remote directory.

Invalid access to memory.

Stack trace:
(003F295A) System::UStrAsg
(008BC642) C5104_0
(008BE6AA) ____ExceptionHandler
(008BB464) __ExceptionHandler
(00062496) ntdll.dll
(0000F13E) ntdll.dll.KiUserExceptionDispatcher
(007BD36A) TTerminal::ReadCurrentDirectory
(007B8AF3) TTerminal::ReactOnCommand
(0067A47B) TUnixDirView::ChangeDirectory
(00678952) TUnixDirView::ExecuteFile
(0041D75A) Customdirview::TCustomDirView::DoExecute
(0041E32B) Customdirview::TCustomDirView::WMLButtonDblClk
(0025AEE1) Vcl::Controls::TWinControl::WndProc
(0029EE0F) Vcl::Comctrls::TCustomListView::WndProc
(0038022C) System::Classes::_18201
(000152F7) USER32.dll
(00015D35) USER32.dll
(0001FD3A) USER32.dll
(0001FD60) USER32.dll.CallWindowProcW
(004430CF) Dragdrop::TDragDrop::WndMethod
(0038022C) System::Classes::_18201
(000152F7) USER32.dll
(00015D35) USER32.dll
(000167BF) USER32.dll
(00016885) USER32.dll.DispatchMessageW

(008BCCAD) C5104_0
(008BE287) _ReThrowException
(007BA53A) TTerminal::DoChangeDirectory
(007BD36A) TTerminal::ReadCurrentDirectory
(007B8AF3) TTerminal::ReactOnCommand
(0067A47B) TUnixDirView::ChangeDirectory
(00678952) TUnixDirView::ExecuteFile
(0041D75A) Customdirview::TCustomDirView::DoExecute
(0041E32B) Customdirview::TCustomDirView::WMLButtonDblClk
(0025AEE1) Vcl::Controls::TWinControl::WndProc
(0029EE0F) Vcl::Comctrls::TCustomListView::WndProc
(00

I know how to reproduce the problem or the problem happens frequently enough. I wish to be contacted by the WinSCP team to help resolving the problem.

Thanks for your report.

Can you send me an email, so I can send you back a debug version of WinSCP to track the problem? Please include link back to this topic in your email. Also note in this topic that you have sent the email. Thanks.

I have opened a terminal and run a grep command that took a long time (about 30 minutes to complete). After I closed the terminal, no matter what folder I browse into it displays that message but the interface works: I click the ok button and the interface works with no problems until, ofcourse, I want to change the directory when the error message pops up again. I hit the ok button and everything still works: I can edit files etc. After restarting the session (not exiting from winscp) I can browse through the folders without that error message. Hope it helps

WinSCP 5.13.1

Error message:
Error getting name of current remote directory.

Invalid access to memory.

Stack trace:
(FFFFF065)
(008BA3F6) C5101_0
(008BC45E) ____ExceptionHandler
(008B9218) __ExceptionHandler
(0003EF0E) ntdll.dll.ZwWow64CallFunction64
(0003F68A) ntdll.dll.KiUserExceptionDispatcher
(007BB2DA) TTerminal::ReadCurrentDirectory
(007B6A63) TTerminal::ReactOnCommand
(006784E7) TUnixDirView::ChangeDirectory
(006769BE) TUnixDirView::ExecuteFile
(0041B7EA) Customdirview::TCustomDirView::DoExecute
(0041C3BB) Customdirview::TCustomDirView::WMLButtonDblClk
(00259A15) Vcl::Controls::TWinControl::WndProc
(0029D943) Vcl::Comctrls::TCustomListView::WndProc
(0037ED60) System::Classes::_18201
(00007E6F) USER32.DLL.CallNextHookEx
(000080CC) USER32.DLL
(00013D90) USER32.DLL.CallWindowProcW
(0003D11F) COMCTL32.DLL.DefSubclassProc
(0003D101) COMCTL32.DLL.DefSubclassProc
(0002B1FC) COMCTL32.DLL
(0003CED0) COMCTL32.DLL
(00007E6F) USER32.DLL.CallNextHookEx
(000080CC) USER32.DLL
(00013D90) USER32.DLL.CallWindowProcW
(0044115F) Dragdrop::TDragDrop::WndMethod
(0037ED60) System::Classes::_18201
(00007E6F) USER32.DLL.CallNextHookEx
(000080CC) USER32.DLL
(0000966A) USER32.DLL
(000096DB) USER32.DLL.DispatchMessageW

(008BAA61) C5101_0
(008BC03B) _ReThrowException
(007B84AA) TTerminal::DoChangeDirectory
(007BB2DA) TTerminal::ReadCurrentDirectory
(007B6A63) TTerminal::ReactOnCommand
(006784E7) TUnixDirView::ChangeDirectory
(006769BE) TUnixDirView::ExecuteFile
%

I know how to reproduce the problem or the problem happens frequently enough. I wish to be contacted by the WinSCP team to help resolving the problem.

Thanks for your report.
I have sent you an email with a debug version of WinSCP to the address you have used to register on this forum.

<Try to describe precise steps that lead to the problem (where do you click, what keys do you press, what do you see, etc.)>
<If relevant, consider attaching a session log file or a screenshot)>

WinSCP 5.11.1

Error message:
Erro obtendo o nome do diretório remoto atual.

Acesso inválido à memória

Rastreamento de pilha:
(0000F065)
(0089C862) C5067_0
(0089E8CA) ____ExceptionHandler
(0089B684) __ExceptionHandler
(0008A63F) ntdll.dll
(00077E9A) ntdll.dll.KiUserExceptionDispatcher
(0079E642) TTerminal::ReadCurrentDirectory
(0079A057) TTerminal::ReactOnCommand
(0066CA13) TUnixDirView::ChangeDirectory
(0066AF7A) TUnixDirView::ExecuteParentDirectory
(0041A284) Customdirview::TCustomDirView::Execute
(00417C72) Customdirview::TCustomDirView::DoExecute
(0041883F) Customdirview::TCustomDirView::WMLButtonDblClk
(00257BA1) Vcl::Controls::TWinControl::WndProc
(0029BACF) Vcl::Comctrls::TCustomListView::WndProc
(0037BB94) System::Classes::_18201
(000374F1) USER32.dll
(00015C3B) USER32.dll
(000159D2) USER32.dll.CallWindowProcW
(00098CBA) COMCTL32.DLL
(00098CA1) COMCTL32.DLL
(00098ADC) COMCTL32.DLL
(000374F1) USER32.dll
(00015C3B) USER32.dll
(000159D2) USER32.dll.CallWindowProcW
(0043DD0B) Dragdrop::TDragDrop::WndMethod
(0037BB94) System::Classes::_18201
(000374F1) USER32.dll
(00015C3B) USER32.dll
(0001553C) USER32.dll
(000152FB) USER32.dll.DispatchMessageW

(0089CECD) C5067_0
(0089E4A7) _ReThrowException
(0079B8C6) TTerminal::DoChangeDirectory
(0079E642) TTerminal::ReadCurrentDirectory
(0079A057) TTerminal::ReactOnCommand
(0066CA13) TUnixDirView::ChangeDirectory
(0066AF7A) TUnixDirView::ExecuteParentDirectory
(0041A

I know how to reproduce the problem or the problem happens frequently enough. I wish to be contacted by the WinSCP team to help resolving the problem.

Thanks for your report.
I have sent you an email with a debug version of WinSCP to the address you have used to register on this forum.

<Try to describe precise steps that lead to the problem (where do you click, what keys do you press, what do you see, etc.)>
<If relevant, consider attaching a session log file or a screenshot)>

WinSCP 5.13

Error message:
Error getting name of current remote directory.

Invalid access to memory.

Stack trace:
(0001F065)
(008B9FD2) C5101_3
(008BC03A) ____ExceptionHandler
(008B8DF4) __ExceptionHandler
(0007C53F) ntdll.dll
(00069D8A) ntdll.dll.KiUserExceptionDispatcher
(007BAF5E) TTerminal::ReadCurrentDirectory
(007B66E7) TTerminal::ReactOnCommand
(0067836B) TUnixDirView::ChangeDirectory
(006768A6) TUnixDirView::ExecuteParentDirectory
(0041DDB8) Customdirview::TCustomDirView::Execute
(0041B79E) Customdirview::TCustomDirView::DoExecute
(0041C36F) Customdirview::TCustomDirView::WMLButtonDblClk
(002599C9) Vcl::Controls::TWinControl::WndProc
(0029D8F7) Vcl::Comctrls::TCustomListView::WndProc
(0037ED14) System::Classes::_18201
(00033921) USER32.dll
(0001378B) USER32.dll
(00013522) USER32.dll.CallWindowProcW
(00076D3A) COMCTL32.DLL
(00076D21) COMCTL32.DLL
(00076B5C) COMCTL32.DLL
(00033921) USER32.dll
(0001378B) USER32.dll
(00013522) USER32.dll.CallWindowProcW
(00441113) Dragdrop::TDragDrop::WndMethod
(0037ED14) System::Classes::_18201
(00033921) USER32.dll
(0001378B) USER32.dll
(0001308C) USER32.dll
(00012E4B) USER32.dll.DispatchMessageW

(008BA63D) C5101_3
(008BBC17) _ReThrowException
(007B812E) TTerminal::DoChangeDirectory
(007BAF5E) TTerminal::ReadCurrentDirectory
(007B66E7) TTerminal::ReactOnCommand
(0067836B) TUnixDirView::ChangeDirectory
(006768A6) TUnixDirView::ExecuteParentDirectory
(0041DDB8) Customdirview::TCustom

I know how to reproduce the problem or the problem happens frequently enough. I wish to be contacted by the WinSCP team to help resolving the problem.

<Try to describe precise steps that lead to the problem (where do you click, what keys do you press, what do you see, etc.)>
<If relevant, consider attaching a session log file or a screenshot)>

WinSCP 5.13

Error message:
Не могу получить имя каталога на сервере.

Ошибка доступа к памяти.

Трассировка стека:
(0002F065)
(008B9FD2) C5101_3
(008BC03A) ____ExceptionHandler
(008B8DF4) __ExceptionHandler
(00081D0F) ntdll.dll
(0006F88A) ntdll.dll.KiUserExceptionDispatcher
(007BAF5E) TTerminal::ReadCurrentDirectory
(007B66E7) TTerminal::ReactOnCommand
(0067836B) TUnixDirView::ChangeDirectory
(00676842) TUnixDirView::ExecuteFile
(0041B79E) Customdirview::TCustomDirView::DoExecute
(0041C36F) Customdirview::TCustomDirView::WMLButtonDblClk
(002599C9) Vcl::Controls::TWinControl::WndProc
(0029D8F7) Vcl::Comctrls::TCustomListView::WndProc
(0037ED14) System::Classes::_18201
(0002C2B1) USER32.dll
(0000D895) USER32.dll
(0000CF22) USER32.dll.CallWindowProcW
(0007957A) COMCTL32.DLL
(00079561) COMCTL32.DLL
(0007939C) COMCTL32.DLL
(0002C2B1) USER32.dll
(0000D895) USER32.dll
(0000CF22) USER32.dll.CallWindowProcW
(00441113) Dragdrop::TDragDrop::WndMethod
(0037ED14) System::Classes::_18201
(0002C2B1) USER32.dll
(0000D895) USER32.dll
(0000D1EF) USER32.dll
(0000CFAB) USER32.dll.DispatchMessageW

(008BA63D) C5101_3
(008BBC17) _ReThrowException
(007B812E) TTerminal::DoChangeDirectory
(

The problem happens rarely. I cannot reproduce it.

<Try to describe precise steps that lead to the problem (where do you click, what keys do you press, what do you see, etc.)>
<If relevant, consider attaching a session log file or a screenshot)>

WinSCP 5.11.3

Error message:
Error getting name of current remote directory.

Invalid access to memory.

Stack trace:
(0006DC60)
(0089D34A) C5067_0
(0089F3B2) ____ExceptionHandler
(0089C16C) __ExceptionHandler
(0003EF0E) ntdll.dll.ZwWow64CallFunction64
(0003F68A) ntdll.dll.KiUserExceptionDispatcher
(0079EFDE) TTerminal::ReadCurrentDirectory
(0079A9F3) TTerminal::ReactOnCommand
(0066D11B) TUnixDirView::ChangeDirectory
(0066B682) TUnixDirView::ExecuteParentDirectory
(0041A3B0) Customdirview::TCustomDirView::Execute
(00417D9A) Customdirview::TCustomDirView::DoExecute
(00418967) Customdirview::TCustomDirView::WMLButtonDblClk
(00257CC9) Vcl::Controls::TWinControl::WndProc
(0029BBF7) Vcl::Comctrls::TCustomListView::WndProc
(0037BCBC) System::Classes::_18201
(00007E6F) USER32.DLL.CallNextHookEx
(000080CC) USER32.DLL
(00013D90) USER32.DLL.CallWindowProcW
(0003D11F) COMCTL32.DLL.DefSubclassProc
(0003D101) COMCTL32.DLL.DefSubclassProc
(0002B1FC) COMCTL32.DLL
(0003CED0) COMCTL32.DLL
(00007E6F) USER32.DLL.CallNextHookEx
(000080CC) USER32.DLL
(00013D90) USER32.DLL.CallWindowProcW
(0043DEA3) Dragdrop::TDragDrop::WndMethod
(0037BCBC) System::Classes::_18201
(00007E6F) USER32.DLL.CallNextHookEx
(000080CC) USER32.DLL
(0000966A) USER32.DLL
(000096DB) USER32.DLL.DispatchMessageW

(0089D9B5) C5067_0
(0089EF8F) _ReThrowException
(0079C262) TTerminal::DoChangeDirectory
(0079EFDE) TTerminal::ReadCurrentDirectory
(0079A9F3) TTerminal::ReactOnCommand
(0066D11B) TUnixDirV

The problem happens rarely. I cannot reproduce it.

<Try to describe precise steps that lead to the problem (where do you click, what keys do you press, what do you see, etc.)>
<If relevant, consider attaching a session log file or a screenshot)>

WinSCP 5.11.3

Error message:
Error getting name of current remote directory.

Invalid access to memory.

Stack trace:
(FFFFF065)
(0089D34A) C5067_0
(0089F3B2) ____ExceptionHandler
(0089C16C) __ExceptionHandler
(000851DF) ntdll.dll
(00073161) ntdll.dll.KiUserExceptionDispatcher
(0079EFDE) TTerminal::ReadCurrentDirectory
(0079A9F3) TTerminal::ReactOnCommand
(0066D11B) TUnixDirView::ChangeDirectory
(0066B682) TUnixDirView::ExecuteParentDirectory
(0041A3B0) Customdirview::TCustomDirView::Execute
(00417D9A) Customdirview::TCustomDirView::DoExecute
(00418967) Customdirview::TCustomDirView::WMLButtonDblClk
(00257CC9) Vcl::Controls::TWinControl::WndProc
(0029BBF7) Vcl::Comctrls::TCustomListView::WndProc
(0037BCBC) System::Classes::_18201
(00032429) USER32.dll
(0002488E) USER32.dll
(0001A312) USER32.dll.CallWindowProcW
(00057059) COMCTL32.DLL
(0005712E) COMCTL32.DLL
(00056EDC) COMCTL32.DLL
(00032429) USER32.dll
(0002488E) USER32.dll
(0001A312) USER32.dll.CallWindowProcW
(0043DEA3) Dragdrop::TDragDrop::WndMethod
(0037BCBC) System::Classes::_18201
(00032429) USER32.dll
(0002488E) USER32.dll
(0002421D) USER32.dll
(00023FEB) USER32.dll.DispatchMessageW

(0089D9B5) C5067_0
(0089EF8F) _ReThrowException
(0079C262) TTerminal::DoChangeDirectory
(0079EFDE) TTerminal::ReadCurrentDirectory
(0079A9F3) TTerminal::ReactOnCommand
(0066D11B) TUnixDirView::ChangeDirectory
(0066B682) TUnixDirView::ExecuteParentDirectory
(0041A3B0) Customdirview::TCust

The problem happens rarely. I cannot reproduce it.

<Try to describe precise steps that lead to the problem (where do you click, what keys do you press, what do you see, etc.)>
<If relevant, consider attaching a session log file or a screenshot)>

WinSCP 5.11.3

Error message:
Error getting name of current remote directory.

Invalid access to memory.

Stack trace:
(FFFFF045)
(0089D34A) C5067_0
(0089F3B2) ____ExceptionHandler
(0089C16C) __ExceptionHandler
(0006248E) ntdll.dll
(0000F15E) ntdll.dll.KiUserExceptionDispatcher
(0079EFDE) TTerminal::ReadCurrentDirectory
(0079A9F3) TTerminal::ReactOnCommand
(0066D11B) TUnixDirView::ChangeDirectory
(0066B682) TUnixDirView::ExecuteParentDirectory
(00038DCF) TNonVisualDataModule::ExplorerActionsExecute
(003BDE00) System::Actions::TContainedActionList::ExecuteAction
(001A4F39) Vcl::Actnlist::TCustomAction::Execute
(0037BCBC) System::Classes::_18201
(000152F7) USER32.dll
(00015D35) USER32.dll
(000167BF) USER32.dll
(00016885) USER32.dll.DispatchMessageW

(0089D9B5) C5067_0
(0089EF8F) _ReThrowException
(0079C262) TTerminal::DoChangeDirectory
(0079EFDE) TTerminal::ReadCurrentDirectory
(0079A9F3) TTerminal::ReactOnCommand
(0066D11B) TUnixDirView::ChangeDirectory
(0066B682) TUnixDirView::ExecuteParentDirectory
(00038DCF) TNonVisualDataModule::ExplorerActionsExecute
(003BDE00) System::Actions::TContainedActionList::ExecuteAction
(001A4F39) Vcl::Actnlist::TCustomAction::Execute
(0037BCBC) System::Classes::_18201
(000152F7) USER32.dll
(00015D35) USER32.dll
(000167BF) USER32.dll
(00016885) USER32.dll.DispatchMessageW

The problem happens rarely. I cannot reproduce it.

Thanks for your report.
I have sent you an email with a debug version of WinSCP to the address you have used to register on this forum.

<Try to describe precise steps that lead to the problem (where do you click, what keys do you press, what do you see, etc.)>
<If relevant, consider attaching a session log file or a screenshot)>

WinSCP 5.11.2

Error message:
Не могу получить имя каталога на сервере.

Ошибка доступа к памяти.

Трассировка стека:
(000CD3D0)
(0089C9C2) C5067_3
(0089EA2A) ____ExceptionHandler
(0089B7E4) __ExceptionHandler
(000851DF) ntdll.dll
(00073161) ntdll.dll.KiUserExceptionDispatcher
(0079E796) TTerminal::ReadCurrentDirectory
(0079A1AB) TTerminal::ReactOnCommand
(0066CB67) TUnixDirView::ChangeDirectory
(0066B0CE) TUnixDirView::ExecuteParentDirectory
(0041A36C) Customdirview::TCustomDirView::Execute
(00417D56) Customdirview::TCustomDirView::DoExecute
(00418923) Customdirview::TCustomDirView::WMLButtonDblClk
(00257C85) Vcl::Controls::TWinControl::WndProc
(0029BBB3) Vcl::Comctrls::TCustomListView::WndProc
(0037BC78) System::Classes::_18201
(00032429) USER32.dll
(0002488E) USER32.dll
(0001A312) USER32.dll.CallWindowProcW
(00057059) COMCTL32.DLL
(0005712E) COMCTL32.DLL
(00056EDC) COMCTL32.DLL
(00032429) USER32.dll
(0002488E) USER32.dll
(0001A312) USER32.dll.CallWindowProcW
(0043DE5F) Dragdrop::TDragDrop::WndMethod
(0037BC78) System::Classes::_18201
(00032429) USER32.dll
(0002488E) USER32.dll
(0002421D) USER32.dll
(00023FEB) USER32.dll.DispatchMessageW

(0089D02D) C5067_3
(0089E607)%2

I know how to reproduce the problem or the problem happens frequently enough. I wish to be contacted by the WinSCP team to help resolving the problem.

Thanks for your report.
I have sent you an email with a debug version of WinSCP to the address you have used to register on this forum.

<Try to describe precise steps that lead to the problem (where do you click, what keys do you press, what do you see, etc.)>
<If relevant, consider attaching a session log file or a screenshot)>

WinSCP 5.11.2

Error message:
Error getting name of current remote directory.

Invalid access to memory.

Stack trace:
(FFFFF045)
(0089C9C2) C5067_3
(0089EA2A) ____ExceptionHandler
(0089B7E4) __ExceptionHandler
(00045416) ntdll.dll.RtlRaiseStatus
(000452A2) ntdll.dll.KiUserExceptionDispatcher
(0079E796) TTerminal::ReadCurrentDirectory
(0079A1AB) TTerminal::ReactOnCommand
(0066CB67) TUnixDirView::ChangeDirectory
(0066B06A) TUnixDirView::ExecuteFile
(00417D56) Customdirview::TCustomDirView::DoExecute
(00418923) Customdirview::TCustomDirView::WMLButtonDblClk
(00257C85) Vcl::Controls::TWinControl::WndProc
(0029BBB3) Vcl::Comctrls::TCustomListView::WndProc
(0037BC78) System::Classes::_18201
(000176EC) USER32.dll
(00017871) USER32.dll
(000133CA) USER32.dll
(000133F0) USER32.dll.CallWindowProcW
(0043DE5F) Dragdrop::TDragDrop::WndMethod
(0037BC78) System::Classes::_18201
(000176EC) USER32.dll
(00017871) USER32.dll
(000179B0) USER32.dll
(00017E97) USER32.dll.DispatchMessageW

(0089D02D) C5067_3
(0089E607) _ReThrowException
(0079BA1A) TTerminal::DoChangeDirectory
(0079E796) TTerminal::ReadCurrentDirectory
(0079A1AB) TTerminal::ReactOnCommand
(0066CB67) TUnixDirView::ChangeDirectory
(0066B06A) TUnixDirView::ExecuteFile
(00417D56) Customdirview::TCustomDirView::DoExecute
(00418923) Customdirview::TCustomDirView::WMLButtonDblClk
(00257C85) Vcl::Controls::TWinControl::WndProc
(0029BBB3) Vcl::Comctrls::TCustomListView::WndProc
(0037BC78%

I know how to reproduce the problem or the problem happens frequently enough. I wish to be contacted by the WinSCP team to help resolving the problem.

<Try to describe precise steps that lead to the problem (where do you click, what keys do you press, what do you see, etc.)>
<If relevant, consider attaching a session log file or a screenshot)>

WinSCP 5.11.1

Error message:
No puedo determinar el nombre del directorio remoto

Acceso a memoria no válido

Traza de la pila:
(0003F045)
(0089C862) C5067_0
(0089E8CA) ____ExceptionHandler
(0089B684) __ExceptionHandler
(00062496) ntdll.dll
(0000F13E) ntdll.dll.KiUserExceptionDispatcher
(0079E642) TTerminal::ReadCurrentDirectory
(0079A057) TTerminal::ReactOnCommand
(0066CA13) TUnixDirView::ChangeDirectory
(0066AF7A) TUnixDirView::ExecuteParentDirectory
(0041A284) Customdirview::TCustomDirView::Execute
(00417C72) Customdirview::TCustomDirView::DoExecute
(0041883F) Customdirview::TCustomDirView::WMLButtonDblClk
(00257BA1) Vcl::Controls::TWinControl::WndProc
(0029BACF) Vcl::Comctrls::TCustomListView::WndProc
(0037BB94) System::Classes::_18201
(000152F7) USER32.dll
(00015D35) USER32.dll
(0001FD3A) USER32.dll
(0001FD60) USER32.dll.CallWindowProcW
(0043DD0B) Dragdrop::TDragDrop::WndMethod
(0037BB94) System::Classes::_18201
(000152F7) USER32.dll
(00015D35) USER32.dll
(000167BF) USER32.dll
(00016885) USER32.dll.DispatchMessageW

(0089CECD) C5067_0
(0089E4A7) _ReThrowException
(0079B8C6) TTerminal::DoChangeDirectory
(0079E642) TTerminal::ReadCurrentDirectory
(0079A057) TTerminal::ReactOnCommand
(0066CA13) TUnixDirView::ChangeDirectory
(0066AF7A) TUnixDirView::ExecuteParentDirectory
(0041A284) Customdirview::TCustomDirView::Execute
(00417C72) Customdirview::TCustomDirView::DoExecute
(0041883F) Customdirview::TCustomDirView::WMLButton

The problem happens rarely. I cannot reproduce it.

<Try to describe precise steps that lead to the problem (where do you click, what keys do you press, what do you see, etc.)>
<If relevant, consider attaching a session log file or a screenshot)>

WinSCP 5.7.7

Error message:
Error getting name of current remote directory.

Invalid access to memory.

Stack trace:
(006EF06D)WinSCP.exe
(007E08AA) C4799_0
(007E2912) ____ExceptionHandler
(007DF88C) __ExceptionHandler
(0008137F) ntdll.dll
(0006EF1A) ntdll.dll.KiUserExceptionDispatcher
(00714252) TTerminal::ReadCurrentDirectory
(00710206) TTerminal::ReactOnCommand
(00616007) TUnixDirView::ChangeDirectory
(00614452) TUnixDirView::ExecuteFile
(0021C609) Vcl::Controls::TWinControl::WndProc
(00260537) Vcl::Comctrls::TCustomListView::WndProc
(0034059C) System::Classes::_18201
(0002C271) USER32.dll
(0000D845) USER32.dll
(0000CED2) USER32.dll.CallWindowProcW
(0007957A) COMCTL32.dll
(00079561) COMCTL32.dll
(0007939C) COMCTL32.dll
(0002C271) USER32.dll
(0000D845) USER32.dll
(0000CED2) USER32.dll.CallWindowProcW
(003FF173) Dragdrop::TDragDrop::WndMethod
(0034059C) System::Classes::_18201
(0002C271) USER32.dll
(0000D845) USER32.dll
(0000D19F) USER32.dll
(0000CF5B) USER32.dll.DispatchMessageW

The problem happens rarely. I cannot reproduce it.

WinSCP was logged on to my server for long may be for a day. The server is having intermittent disconnection issues (both on SCP & Putty). This could be related to that problem.

<If relevant, consider attaching a session log file or a screenshot)>

WinSCP 5.7.7

Error message:
Error getting name of current remote directory.

Invalid access to memory.

Stack trace:
(0009DC50)
(007E08AA) C4799_0
(007E2912) ____ExceptionHandler
(007DF88C) __ExceptionHandler
(0007C54F) ntdll.dll
(00069D8A) ntdll.dll.KiUserExceptionDispatcher
(00714252) TTerminal::ReadCurrentDirectory
(00710206) TTerminal::ReactOnCommand
(007113FA) TTerminal::SetCurrentDirectoryW
(0061594A) TUnixDirView::SetPath
(0002167E) TCustomScpExplorerForm::RemotePathComboBoxItemClick
(0043B305) Tbxextitems::TTBXComboBoxItem::DoListClick
(0034059C) System::Classes::_18201
(00033921) USER32.dll
(0001378B) USER32.dll
(0001308C) USER32.dll
(00012E4B) USER32.dll.DispatchMessageW

The problem happens rarely. I cannot reproduce it.

tried to run a command prompt to change the ownership of a directory and it timed out. Then when I tried to check the ownership of the folder contents or go back up to the root directory I got this error.

WinSCP 5.7.7

Error message:
Error getting name of current remote directory.

Invalid access to memory.

Stack trace:
(27FFF000)WinSCP.exe
(007E08AA) C4799_0
(007E2912) ____ExceptionHandler
(007DF88C) __ExceptionHandler
(00062496) ntdll.dll
(0000F13E) ntdll.dll.KiUserExceptionDispatcher
(00714252) TTerminal::ReadCurrentDirectory
(00710206) TTerminal::ReactOnCommand
(007113FA) TTerminal::SetCurrentDirectoryW
(0061594A) TUnixDirView::SetPath
(003DAE49) Customdirview::TCustomDirView::HistoryGo
(00007C63) TCustomScpExplorerForm::HistoryGo
(00382614) System::Actions::TContainedActionList::ExecuteAction
(0016A155) Vcl::Actnlist::TCustomAction::Execute
(0034059C) System::Classes::_18201
(000152F7) USER32.dll
(00015D35) USER32.dll
(000167CE) USER32.dll
(00016895) USER32.dll.DispatchMessageW

The problem happens rarely. I cannot reproduce it.

<Try to describe precise steps that lead to the problem (where do you click, what keys do you press, what do you see, etc.)>
<If relevant, consider attaching a session log file or a screenshot)>

WinSCP 5.7.7

Error message:
Error getting name of current remote directory.

Invalid access to memory.

Stack trace:
(0062F074)WinSCP.exe
(007E08AA)
(007E2912)
(007DF88C)
(00062496) ntdll.dll
(0000F13E) ntdll.dll.KiUserExceptionDispatcher
(00714252)
(00710206)
(00616007) @TUnixDirView@ChangeDirectory$qqr20System@UnicodeString
(00614452) @TUnixDirView@ExecuteFile$qqrp22Vcl@Comctrls@TListItem
(0021C609)
(00260537)
(0034059C)
(000152F7) USER32.dll
(00015D35) USER32.dll
(0001FD32) USER32.dll
(0001FD58) USER32.dll.CallWindowProcW
(003FF173)
(0034059C)
(000152F7) USER32.dll
(00015D35) USER32.dll
(000167CE) USER32.dll
(00016895) USER32.dll.DispatchMessageW

The problem happens rarely. I cannot reproduce it.

<I think i have bad coding in my debuian>
<If relevant, consider attaching a session log file or a screenshot)>

WinSCP 5.7.7

Error message:
Błąd podczas pobierania nazwy bieżącego katalogu zdalnego.

Naruszenie ochrony pamęci.

Stack trace:
(0072F073)WinSCP.exe
(007E08AA) C4799_0
(007E2912) ____ExceptionHandler
(007DF88C) __ExceptionHandler
(0008A61F) ntdll.dll
(00077E7A) ntdll.dll.KiUserExceptionDispatcher
(00714252) TTerminal::ReadCurrentDirectory
(00710206) TTerminal::ReactOnCommand
(00616007) TUnixDirView::ChangeDirectory
(006144B6) TUnixDirView::ExecuteParentDirectory
(003D9EB8) Customdirview::TCustomDirView::Execute
(0021C609) Vcl::Controls::TWinControl::WndProc
(00260537) Vcl::Comctrls::TCustomListView::WndProc
(0034059C) System::Classes::_18201
(000374F1) USER32.dll
(00015C3B) USER32.dll
(000159D2) USER32.dll.CallWindowProcW
(00098CBA) COMCTL32.dll
(00098CA1) COMCTL32.dll
(00098ADC) COMCTL32.dll
(000374F1) USER32.dll
(00015C3B) USER32.dll
(000159D2) USER32.dll.CallWindowProcW
(003FF173) Dragdrop::TDragDrop::WndMethod
(0034059C) System::Classes::_18201
(000374F1) USER32.dll
(00015C3B) USER32.dll
(0001553C) USER32.dll
(000152FB) USER32.dll.DispatchMessageW

The problem happens rarely. I cannot reproduce it.

<Try to describe precise steps that lead to the problem (where do you click, what keys do you press, what do you see, etc.)>
<If relevant, consider attaching a session log file or a screenshot)>

WinSCP 5.7.7

Error message:
Не могу получить имя каталога на сервере.

Ошибка доступа к памяти.

Трассировка стека:
(4D84CD26)WinSCP.exe
(007E08AA) C4799_0
(007E2912) ____ExceptionHandler
(007DF88C) __ExceptionHandler
(0008A61F) ntdll.dll
(00077E7A) ntdll.dll.KiUserExceptionDispatcher
(00714252) TTerminal::ReadCurrentDirectory
(00710206) TTerminal::ReactOnCommand
(00616007) TUnixDirView::ChangeDirectory
(006144B6) TUnixDirView::ExecuteParentDirectory
(003D9EB8) Customdirview::TCustomDirView::Execute
(0021C609) Vcl::Controls::TWinControl::WndProc
(00260537) Vcl::Comctrls::TCustomListView::WndProc
(0034059C) System::Classes::_18201
(000374F1) USER32.dll
(00015C3B) USER32.dll
(000159D2) USER32.dll.CallWindowProcW
(00098CBA) COMCTL32.DLL
(00098CA1) COMCTL32.DLL
(00098ADC) COMCTL32.DLL
(000374F1) USER32.dll
(00015C3B) USER32.dll
(000159D2) USER32.dll.CallWindowProcW
(003FF173) Dragdrop::TDragDrop::WndMethod
(0034059C) System::Classes::_18201
(000374F1) USER32.dll
(00015C3B) USER32.dll
(0001553C) USER32.dll
(000152FB) USER32.dll.DispatchMessageW

The problem happens rarely. I cannot reproduce it.

Thanks for your report.
I have sent you an email with a debug version of WinSCP to the address you have used to register on this forum.

<Try to describe precise steps that lead to the problem (where do you click, what keys do you press, what do you see, etc.)>
<If relevant, consider attaching a session log file or a screenshot)>

WinSCP 5.7.7

Error message:
No puedo determinar el nombre del directorio remoto

Acceso a memoria no válido

Traza de la pila:
(002DF06C)WinSCP.exe
(007E08AA) C4799_0
(007E2912) ____ExceptionHandler
(007DF88C) __ExceptionHandler
(00062496) ntdll.dll
(0000F13E) ntdll.dll.KiUserExceptionDispatcher
(00714252) TTerminal::ReadCurrentDirectory
(00710206) TTerminal::ReactOnCommand
(00619316) TCustomUnixDriveView::Change
(002532F2) Vcl::Comctrls::TCustomTreeView::CNNotify
(003DE479) Customdriveview::TCustomDriveView::CNNotify
(0021C609) Vcl::Controls::TWinControl::WndProc
(002535AE) Vcl::Comctrls::TCustomTreeView::WndProc
(0021C76F) Vcl::Controls::_17076
(0021C609) Vcl::Controls::TWinControl::WndProc
(0021BC50) Vcl::Controls::TWinControl::MainWndProc
(0034059C) System::Classes::_18201
(000152F7) USER32.dll
(00015D35) USER32.dll
(00015DE8) USER32.dll
(00015E49) USER32.dll
(0000F117) ntdll.dll.KiUserCallbackDispatcher
(000186D0) USER32.dll.SendMessageW
(0002B06D) COMCTL32.DLL
(000A846F) COMCTL32.DLL
(000A77FB) COMCTL32.DLL
(0004B30B) COMCTL32.DLL
(0004B226) COMCTL32.DLL
(000152F7) USER32.dll
(00015D35) USER32.dll
(0001FD32) USER32.dll
(0001FD58) USER32.dll.CallWindowProcW
(0021C71A) Vcl::Controls::TWinControl::DefaultHandler
(003DE4D9) Customdriveview::TCustomDriveView::WMLButtonDown
(0034059C) System::Classes::_18201
(000152F7) USER32.dll
(00015D35) USER32.dll
(0001FD32) USER32.dll
(0001FD58) USER32.dll.CallWindowProcW

I know how to reproduce the problem or the problem happens frequently enough. I wish to be contacted by the WinSCP team to help resolving the problem.

<Try to describe precise steps that lead to the problem (where do you click, what keys do you press, what do you see, etc.)>
<If relevant, consider attaching a session log file or a screenshot)>

WinSCP 5.7.7

Error message:
Error getting name of current remote directory.

Invalid access to memory.

Stack trace:
(AA4AE6C7)WinSCP.exe
(007E08AA) C4799_0
(007E2912) ____ExceptionHandler
(007DF88C) __ExceptionHandler
(0007C54F) ntdll.dll
(00069D8A) ntdll.dll.KiUserExceptionDispatcher
(00714252) TTerminal::ReadCurrentDirectory
(00710206) TTerminal::ReactOnCommand
(00619316) TCustomUnixDriveView::Change
(002532F2) Vcl::Comctrls::TCustomTreeView::CNNotify
(003DE479) Customdriveview::TCustomDriveView::CNNotify
(0021C609) Vcl::Controls::TWinControl::WndProc
(002535AE) Vcl::Comctrls::TCustomTreeView::WndProc
(0021C76F) Vcl::Controls::_17076
(0021C609) Vcl::Controls::TWinControl::WndProc
(0021BC50) Vcl::Controls::TWinControl::MainWndProc
(0034059C) System::Classes::_18201
(00033921) USER32.dll
(0001378B) USER32.dll
(0001336B) USER32.dll
(0001A177) USER32.dll
(00069D64) ntdll.dll.KiUserCallbackDispatcher
(00012A2E) USER32.dll.SendMessageW
(000659B8) COMCTL32.DLL
(00037957) COMCTL32.DLL
(000377BE) COMCTL32.DLL
(0004ED58) COMCTL32.DLL
(0002E5D1) COMCTL32.DLL
(00033921) USER32.dll
(0001378B) USER32.dll
(00013522) USER32.dll.CallWindowProcW
(0021C71A) Vcl::Controls::TWinControl::DefaultHandler
(003DE4D9) Customdriveview::TCustomDriveView::WMLButtonDown
(0034059C) System::Classes::_18201
(00033921) USER32.dll
(0001378B) USER32.dll
(00013522) USER32.dll.CallWindowProcW
(003FF173) Dragdrop::TDragDrop::WndMethod
(0034059C)

The problem happens rarely. I cannot reproduce it.

Opening P through crtl+P. Invalid access to memory error on navigating the remote directory.

WinSCP 5.7.7

Error message:
Error getting name of current remote directory.

Invalid access to memory.

Stack trace:
(0002F073)
(007E08AA) C4799_0
(007E2912) ____ExceptionHandler
(007DF88C) __ExceptionHandler
(0008A61F) ntdll.dll
(00077E7A) ntdll.dll.KiUserExceptionDispatcher
(00714252) TTerminal::ReadCurrentDirectory
(00710206) TTerminal::ReactOnCommand
(00616007) TUnixDirView::ChangeDirectory
(00614452) TUnixDirView::ExecuteFile
(0021C609) Vcl::Controls::TWinControl::WndProc
(00260537) Vcl::Comctrls::TCustomListView::WndProc
(0034059C) System::Classes::_18201
(000374F1) USER32.dll
(00015C3B) USER32.dll
(000159D2) USER32.dll.CallWindowProcW
(00098CBA) COMCTL32.DLL
(00098CA1) COMCTL32.DLL
(00098ADC) COMCTL32.DLL
(000374F1) USER32.dll
(00015C3B) USER32.dll
(000159D2) USER32.dll.CallWindowProcW
(003FF173) Dragdrop::TDragDrop::WndMethod
(0034059C) System::Classes::_18201
(000374F1) USER32.dll
(00015C3B) USER32.dll
(0001553C) USER32.dll
(000152FB) USER32.dll.DispatchMessageW

The problem happens rarely. I cannot reproduce it.

<Try to describe precise steps that lead to the problem (where do you click, what keys do you press, what do you see, etc.)>
<If relevant, consider attaching a session log file or a screenshot)>

WinSCP 5.7.7

Error message:
Error getting name of current remote directory.

Invalid access to memory.

Stack trace:
(0072F073)WinSCP.exe
(007E08AA) C4799_0
(007E2912) ____ExceptionHandler
(007DF88C) __ExceptionHandler
(0008A61F) ntdll.dll
(00077E7A) ntdll.dll.KiUserExceptionDispatcher
(00714252) TTerminal::ReadCurrentDirectory
(00710206) TTerminal::ReactOnCommand
(00616007) TUnixDirView::ChangeDirectory
(00614452) TUnixDirView::ExecuteFile
(0021C609) Vcl::Controls::TWinControl::WndProc
(00260537) Vcl::Comctrls::TCustomListView::WndProc
(0034059C) System::Classes::_18201
(000374F1) USER32.dll
(00015C3B) USER32.dll
(000159D2) USER32.dll.CallWindowProcW
(00098CBA) COMCTL32.DLL
(00098CA1) COMCTL32.DLL
(00098ADC) COMCTL32.DLL
(000374F1) USER32.dll
(00015C3B) USER32.dll
(000159D2) USER32.dll.CallWindowProcW
(003FF173) Dragdrop::TDragDrop::WndMethod
(0034059C) System::Classes::_18201
(000374F1) USER32.dll
(00015C3B) USER32.dll
(0001553C) USER32.dll
(000152FB) USER32.dll.DispatchMessageW

The problem happens rarely. I cannot reproduce it.

Thanks for your report.
I have sent you an email with a debug version of WinSCP to the address you have used to register on this forum.

<Try to describe precise steps that lead to the problem (where do you click, what keys do you press, what do you see, etc.)>
<If relevant, consider attaching a session log file or a screenshot)>

WinSCP 5.7.7

Error message:
Error getting name of current remote directory.

Invalid access to memory.

Stack trace:
(FFFFF06E)
(007E08AA) C4799_0
(007E2912) ____ExceptionHandler
(007DF88C) __ExceptionHandler
(00062496) ntdll.dll
(0000F13E) ntdll.dll.KiUserExceptionDispatcher
(00714252) TTerminal::ReadCurrentDirectory
(00710206) TTerminal::ReactOnCommand
(00616007) TUnixDirView::ChangeDirectory
(00614452) TUnixDirView::ExecuteFile
(0021C609) Vcl::Controls::TWinControl::WndProc
(00260537) Vcl::Comctrls::TCustomListView::WndProc
(0034059C) System::Classes::_18201
(000152F7) USER32.dll
(00015D35) USER32.dll
(0001FD32) USER32.dll
(0001FD58) USER32.dll.CallWindowProcW
(003FF173) Dragdrop::TDragDrop::WndMethod
(0034059C) System::Classes::_18201
(000152F7) USER32.dll
(00015D35) USER32.dll
(000167CE) USER32.dll
(00016895) USER32.dll.DispatchMessageW

I know how to reproduce the problem or the problem happens frequently enough. I wish to be contacted by the WinSCP team to help resolving the problem.

<Try to describe precise steps that lead to the problem (where do you click, what keys do you press, what do you see, etc.)>
<If relevant, consider attaching a session log file or a screenshot)>

WinSCP 5.7.6

Error message:
Error getting name of current remote directory.

Invalid access to memory.

Stack trace:
(0010F073)
(007E46BA) C4799_3
(007E6722) ____ExceptionHandler
(007E369C) __ExceptionHandler
(0008A61F) ntdll.dll
(00077E7A) ntdll.dll.KiUserExceptionDispatcher
(00713702) TTerminal::ReadCurrentDirectory
(0070F6B6) TTerminal::ReactOnCommand
(006154B7) TUnixDirView::ChangeDirectory
(00613902) TUnixDirView::ExecuteFile
(0021C315) Vcl::Controls::TWinControl::WndProc
(00260243) Vcl::Comctrls::TCustomListView::WndProc
(003402A8) System::Classes::_18201
(000374F1) USER32.dll
(00015C3B) USER32.dll
(000159D2) USER32.dll.CallWindowProcW
(00098CBA) COMCTL32.DLL
(00098CA1) COMCTL32.DLL
(00098ADC) COMCTL32.DLL
(000374F1) USER32.dll
(00015C3B) USER32.dll
(000159D2) USER32.dll.CallWindowProcW
(003FEE7F) Dragdrop::TDragDrop::WndMethod
(003402A8) System::Classes::_18201
(000374F1) USER32.dll
(00015C3B) USER32.dll
(0001553C) USER32.dll
(000152FB) USER32.dll.DispatchMessageW

The problem happens rarely. I cannot reproduce it.

martin wrote:

Thanks for sharing this. But the default 75% does not mean that only 75% percent of memory is preserved. I means that Windows reserves space on the disk for 75% of the total memory. But the hiberfil is compressed, so typically the 75% is ok. Were it not, Windows does not allow the hibernation. It would definitely not loose memory and let applications crash on resuming.

See https://superuser.com/q/746290/213663

Hello Martin,

Thanks for your fast response.

I am running the debug version but the error does not occur anymore since I did the changes to hiberfil mentioned above.
I will revert the changes and see if the problem returns, just to be on the safe site.
Also I run multiple connections in WinSCP simultanously (different servers), if that matters in any way.

With kind regards
Chris

<Try to describe precise steps that lead to the problem (where do you click, what keys do you press, what do you see, etc.)>
<If relevant, consider attaching a session log file or a screenshot)>

WinSCP 5.7.7

Error message:
Erreur lors l'établissement du nom du répertoire distant.

Accès mémoire invalide.

Trace de la pile :
(0043F02E)WinSCP.exe
(007E08AA) C4799_0
(007E2912) ____ExceptionHandler
(007DF88C) __ExceptionHandler
(00062496) ntdll.dll
(0000F13E) ntdll.dll.KiUserExceptionDispatcher
(00714252) TTerminal::ReadCurrentDirectory
(00710206) TTerminal::ReactOnCommand
(00616007) TUnixDirView::ChangeDirectory
(006144B6) TUnixDirView::ExecuteParentDirectory
(003D9EB8) Customdirview::TCustomDirView::Execute
(0021C609) Vcl::Controls::TWinControl::WndProc
(00260537) Vcl::Comctrls::TCustomListView::WndProc
(0034059C) System::Classes::_18201
(000152F7) USER32.dll
(00015D35) USER32.dll
(0001FD32) USER32.dll
(0001FD58) USER32.dll.CallWindowProcW
(003FF173) Dragdrop::TDragDrop::WndMethod
(0034059C) System::Classes::_18201
(000152F7) USER32.dll
(00015D35) USER32.dll
(000167CE) USER32.dll
(00016895) USER32.dll.DispatchMessageW

I know how to reproduce the problem or the problem happens frequently enough. I wish to be contacted by the WinSCP team to help resolving the problem.

Thanks for your report.

I have sent you an email with a debug version of WinSCP to the address you have used to register on this forum.

Anonymous wrote:

Since I only ran into said problem after hibernate mode, I googled for possible reasons of ram access issue.
Turns out windows does NOT store 100% of the ram contents on your harddisk by default, thus some values stored in memory may get lost.

Try this workarround:
1. run CMD.exe as administrator
2. run powercfg -h -size 100%

Next time you set window to sleep ("hibernate"), it will store the FULL memory to the harddisk and thus no memory access issues should occur.

Source: https://www.sevenforums.com/tutorials/220051-hibernate-change-size-hiberfil-sys-file.html

Thanks for sharing this. But the default 75% does not mean that only 75% percent of memory is preserved. I means that Windows reserves space on the disk for 75% of the total memory. But the hiberfil is compressed, so typically the 75% is ok. Were it not, Windows does not allow the hibernation. It would definitely not loose memory and let applications crash on resuming.

See https://superuser.com/q/746290/213663

christian@... wrote:

Reproduce the error:
Run WinSCP, connect anywhere you like.
Hibernate your PC, wake it up, reconnect WinSCP and try to change a folder (as in navigate to different CWD i.e. cd ../ cd www ...).
You can proceed by hitting "OK" in most cases but to get rid of the dialog after every folder change, you need to close WinSCP and restart it.

Since I only ran into said problem after hibernate mode, I googled for possible reasons of ram access issue.
Turns out windows does NOT store 100% of the ram contents on your harddisk by default, thus some values stored in memory may get lost.

Try this workarround:
1. run CMD.exe as administrator
2. run powercfg -h -size 100%

Next time you set window to sleep ("hibernate"), it will store the FULL memory to the harddisk and thus no memory access issues should occur.

Source: https://www.sevenforums.com/tutorials/220051-hibernate-change-size-hiberfil-sys-file.html

Sidenote: Hibernate can also cause the "Error getting the name of current remote directory" error, thus I believe might be a problem with memory reserving.
Didn't have time to disassemble and trace in Olly yet.

--- It's basically the same message just in english. Didn't clarify that.


WinSCP 5.7

--- I'm running a newer version of WinSCP on another laptop, but the error occurs there as well

On Windows 10 Home x64, WinSCP throws access violations after hibernate (literally always).
Reconnecting does not solve the issue, you need to entirely restart the client.

Reproduce the error:
Run WinSCP, connect anywhere you like.
Hibernate your PC, wake it up, reconnect WinSCP and try to change a folder (as in navigate to different CWD i.e. cd ../ cd www ...).
You can proceed by hitting "OK" in most cases but to get rid of the dialog after every folder change, you need to close WinSCP and restart it.

Sidenote: Hibernate can also cause the "Error getting the name of current remote directory" error, thus I believe might be a problem with memory reserving.
Didn't have time to disassemble and trace in Olly yet.

WinSCP 5.7

Error message:
Fehler beim Empfang des entfernten Verzeichnisnamens.

Zugriffsverletzung - ungültiger Zugriff auf den Speicher.

Stack trace:
(0072F073) WinSCP.exe.[00730073]
[018605DE] C4725_0
[01862646] ____ExceptionHandler
[0185F5C0] __ExceptionHandler
[77C8D54F] ntdll.dll
[77C7AD8A] ntdll.dll.KiUserExceptionDispatcher
[01790A1E] TTerminal::ReadCurrentDirectory
[0178C892] TTerminal::ReactOnCommand
[01693D53] TUnixDirView::ChangeDirectory
[01692216] TUnixDirView::ExecuteParentDirectory
[01459FD0] Customdirview::TCustomDirView::Execute
[0129C755] Vcl::Controls::TWinControl::WndProc
[012E0683] Vcl::Comctrls::TCustomListView::WndProc
[013C0678] System::Classes::_18201
[760E4921] USER32.dll
[760C478B] USER32.dll
[760C4522] USER32.dll.CallWindowProcW
[73D37D3A] COMCTL32.DLL
[73D37D21] COMCTL32.DLL
[73D37B5C] COMCTL32.DLL
[760E4921] USER32.dll
[760C478B] USER32.dll
[760C4522] USER32.dll.CallWindowProcW
[0147F24F] Dragdrop::TDragDrop::WndMethod
[013C0678] System::Classes::_18201
[760E4921] USER32.dll
[760C478B] USER32.dll
[760C408C] USER32.dll
[760C3E4B] USER32.dll.DispatchMessageW

I know how to reproduce the problem or the problem happens frequently enough. I wish to be contacted by the WinSCP team to help resolving the problem.

Thanks for your reports.
I have sent you an email with a debug version of WinSCP to the address you have used to register on this forum.

<Try to describe precise steps that lead to the problem (where do you click, what keys do you press, what do you see, etc.)>
<If relevant, consider attaching a session log file or a screenshot)>

WinSCP 5.7.7

Error message:
Error getting name of current remote directory.

Invalid access to memory.

Stack trace:
(0043F02E)WinSCP.exe
(007E08AA) C4799_0
(007E2912) ____ExceptionHandler
(007DF88C) __ExceptionHandler
(000455C6) ntdll.dll.RtlRaiseStatus
(00045452) ntdll.dll.KiUserExceptionDispatcher
(00714252) TTerminal::ReadCurrentDirectory
(00710206) TTerminal::ReactOnCommand
(00616007) TUnixDirView::ChangeDirectory
(006144B6) TUnixDirView::ExecuteParentDirectory
(003D9EB8) Customdirview::TCustomDirView::Execute
(0021C609) Vcl::Controls::TWinControl::WndProc
(00260537) Vcl::Comctrls::TCustomListView::WndProc
(0034059C) System::Classes::_18201
(000176EC) USER32.dll
(00017871) USER32.dll
(000133CA) USER32.dll
(000133F0) USER32.dll.CallWindowProcW
(003FF173) Dragdrop::TDragDrop::WndMethod
(0034059C) System::Classes::_18201
(000176EC) USER32.dll
(00017871) USER32.dll
(000179B0) USER32.dll
(00017E97) USER32.dll.DispatchMessageW

I know how to reproduce the problem or the problem happens frequently enough. I wish to be contacted by the WinSCP team to help resolving the problem.

<Try to describe precise steps that lead to the problem (where do you click, what keys do you press, what do you see, etc.)>
<If relevant, consider attaching a session log file or a screenshot)>

WinSCP 5.7.7

Error message:
Error getting name of current remote directory.

Invalid access to memory.

Stack trace:
(0072F073)WinSCP.exe
(007E08AA) C4799_0
(007E2912) ____ExceptionHandler
(007DF88C) __ExceptionHandler
(0008A61F) ntdll.dll
(00077E7A) ntdll.dll.KiUserExceptionDispatcher
(00714252) TTerminal::ReadCurrentDirectory
(00710206) TTerminal::ReactOnCommand
(00616007) TUnixDirView::ChangeDirectory
(00614452) TUnixDirView::ExecuteFile
(0021C609) Vcl::Controls::TWinControl::WndProc
(00260537) Vcl::Comctrls::TCustomListView::WndProc
(0034059C) System::Classes::_18201
(000374F1) USER32.dll
(00015C3B) USER32.dll
(000159D2) USER32.dll.CallWindowProcW
(00098CBA) COMCTL32.DLL
(00098CA1) COMCTL32.DLL
(00098ADC) COMCTL32.DLL
(000374F1) USER32.dll
(00015C3B) USER32.dll
(000159D2) USER32.dll.CallWindowProcW
(003FF173) Dragdrop::TDragDrop::WndMethod
(0034059C) System::Classes::_18201
(000374F1) USER32.dll
(00015C3B) USER32.dll
(0001553C) USER32.dll
(000152FB) USER32.dll.DispatchMessageW

I know how to reproduce the problem or the problem happens frequently enough. I wish to be contacted by the WinSCP team to help resolving the problem.

<Try to describe precise steps that lead to the problem (where do you click, what keys do you press, what do you see, etc.)>
<If relevant, consider attaching a session log file or a screenshot)>

WinSCP 5.7.7

Error message:
Error getting name of current remote directory.

Invalid access to memory.

Stack trace:
(007E08AA) C4799_0
(007E2912) ____ExceptionHandler
(007DF88C) __ExceptionHandler
(0007C61F) ntdll.dll
(00069E6A) ntdll.dll.KiUserExceptionDispatcher
(00714252) TTerminal::ReadCurrentDirectory
(00710206) TTerminal::ReactOnCommand
(00616007) TUnixDirView::ChangeDirectory
(00614452) TUnixDirView::ExecuteFile
(0021C609) Vcl::Controls::TWinControl::WndProc
(00260537) Vcl::Comctrls::TCustomListView::WndProc
(0034059C) System::Classes::_18201
(00033921) USER32.dll
(0001378B) USER32.dll
(00013522) USER32.dll.CallWindowProcW
(00076D3A) COMCTL32.DLL
(00076D21) COMCTL32.DLL
(00076B5C) COMCTL32.DLL
(00033921) USER32.dll
(0001378B) USER32.dll
(00013522) USER32.dll.CallWindowProcW
(003FF173) Dragdrop::TDragDrop::WndMethod
(0034059C) System::Classes::_18201
(00033921) USER32.dll
(0001378B) USER32.dll
(0001308C) USER32.dll
(00012E4B) USER32.dll.DispatchMessageW

The problem happens rarely. I cannot reproduce it.

<Try to describe precise steps that lead to the problem (where do you click, what keys do you press, what do you see, etc.)>
<If relevant, consider attaching a session log file or a screenshot)>

WinSCP 5.7.7

Error message:
Не могу получить имя каталога на сервере.

Ошибка доступа к памяти.

Трассировка стека:
(0037F044) System::Syncobjs::_16501
(007E08AA) C4799_0
(007E2912) ____ExceptionHandler
(007DF88C) __ExceptionHandler
(0003EE3E) ntdll.dll.ZwWow64CallFunction64
(0003F5BA) ntdll.dll.KiUserExceptionDispatcher
(00714252) TTerminal::ReadCurrentDirectory
(00710206) TTerminal::ReactOnCommand
(00616007) TUnixDirView::ChangeDirectory
(00614452) TUnixDirView::ExecuteFile
(0021C609) Vcl::Controls::TWinControl::WndProc
(00260537) Vcl::Comctrls::TCustomListView::WndProc
(0034059C) System::Classes::_18201
(00007E6F) USER32.DLL.CallNextHookEx
(000080CC) USER32.DLL
(0000C6C0) USER32.DLL.CallWindowProcW
(0003D11F) COMCTL32.DLL.DefSubclassProc
(0003D101) COMCTL32.DLL.DefSubclassProc
(0002B1FC) COMCTL32.DLL
(0003CED0) COMCTL32.DLL
(00007E6F) USER32.DLL.CallNextHookEx
(000080CC) USER32.DLL
(0000C6C0) USER32.DLL.CallWindowProcW
(003FF173) Dragdrop::TDragDrop::WndMethod
(0034059C) System::Classes::_18201
(00007E6F) USER32.DLL.CallNextHookEx
(000080CC) USER32.DLL
(00009625) USER32.DLL
(0000967B) USER32.DLL.DispatchMessageW

The problem happens rarely. I cannot reproduce it.

<Try to describe precise steps that lead to the problem (where do you click, what keys do you press, what do you see, etc.)>
<If relevant, consider attaching a session log file or a screenshot)>

WinSCP 5.7.7

Error message:
Error getting name of current remote directory.

Invalid access to memory.

Stack trace:
(000DF045)
(007E08AA) C4799_0
(007E2912) ____ExceptionHandler
(007DF88C) __ExceptionHandler
(00062496) ntdll.dll
(0000F13E) ntdll.dll.KiUserExceptionDispatcher
(00714252) TTerminal::ReadCurrentDirectory
(00710206) TTerminal::ReactOnCommand
(00616007) TUnixDirView::ChangeDirectory
(00614452) TUnixDirView::ExecuteFile
(0021C609) Vcl::Controls::TWinControl::WndProc
(00260537) Vcl::Comctrls::TCustomListView::WndProc
(0034059C) System::Classes::_18201
(000152F7) USER32.dll
(00015D35) USER32.dll
(0001FD32) USER32.dll
(0001FD58) USER32.dll.CallWindowProcW
(003FF173) Dragdrop::TDragDrop::WndMethod
(0034059C) System::Classes::_18201
(000152F7) USER32.dll
(00015D35) USER32.dll
(000167CE) USER32.dll
(00016895) USER32.dll.DispatchMessageW

The problem happens rarely. I cannot reproduce it.

<Try to describe precise steps that lead to the problem (where do you click, what keys do you press, what do you see, etc.)>
<If relevant, consider attaching a session log file or a screenshot)>

WinSCP 5.7.7

Error message:
Error getting name of current remote directory.

Invalid access to memory.

Stack trace:
(0042F031)WinSCP.exe
(007E08AA) C4799_0
(007E2912) ____ExceptionHandler
(007DF88C) __ExceptionHandler
(0007C54F) ntdll.dll
(00069D8A) ntdll.dll.KiUserExceptionDispatcher
(00714252) TTerminal::ReadCurrentDirectory
(00710206) TTerminal::ReactOnCommand
(00616007) TUnixDirView::ChangeDirectory
(006144B6) TUnixDirView::ExecuteParentDirectory
(003D9EB8) Customdirview::TCustomDirView::Execute
(0021C609) Vcl::Controls::TWinControl::WndProc
(00260537) Vcl::Comctrls::TCustomListView::WndProc
(0034059C) System::Classes::_18201
(00033921) USER32.dll
(0001378B) USER32.dll
(00013522) USER32.dll.CallWindowProcW
(00076D3A) COMCTL32.DLL
(00076D21) COMCTL32.DLL
(00076B5C) COMCTL32.DLL
(00033921) USER32.dll
(0001378B) USER32.dll
(00013522) USER32.dll.CallWindowProcW
(003FF173) Dragdrop::TDragDrop::WndMethod
(0034059C) System::Classes::_18201
(00033921) USER32.dll
(0001378B) USER32.dll
(0001308C) USER32.dll
(00012E4B) USER32.dll.DispatchMessageW

The problem happens rarely. I cannot reproduce it.

gt_damager@... wrote:

WinSCP 5.7.7

Error message:
Fehler beim Empfang des entfernten Verzeichnisnamens.

Zugriffsverletzung - ungültiger Zugriff auf den Speicher.

Stack trace:
...

I know how to reproduce the problem or the problem happens frequently enough. I wish to be contacted by the WinSCP team to help resolving the problem.

Thanks for your report.
I have sent you an email with a debug version of WinSCP to the address you have used to register on this forum.

<Try to describe precise steps that lead to the problem (where do you click, what keys do you press, what do you see, etc.)>
<If relevant, consider attaching a session log file or a screenshot)>

WinSCP 5.7.7

Error message:
Не могу получить имя каталога на сервере.

Ошибка доступа к памяти.

Трассировка стека:
(0000F073)
(007E08AA) C4799_0
(007E2912) ____ExceptionHandler
(007DF88C) __ExceptionHandler
(0008A61F) ntdll.dll
(00077E7A) ntdll.dll.KiUserExceptionDispatcher
(00714252) TTerminal::ReadCurrentDirectory
(00710206) TTerminal::ReactOnCommand
(00616007) TUnixDirView::ChangeDirectory
(00614452) TUnixDirView::ExecuteFile
(0021C609) Vcl::Controls::TWinControl::WndProc
(00260537) Vcl::Comctrls::TCustomListView::WndProc
(0034059C) System::Classes::_18201
(000374F1) USER32.dll
(00015C3B) USER32.dll
(000159D2) USER32.dll.CallWindowProcW
(00098CBA) COMCTL32.DLL
(00098CA1) COMCTL32.DLL
(00098ADC) COMCTL32.DLL
(000374F1) USER32.dll
(00015C3B) USER32.dll
(000159D2) USER32.dll.CallWindowProcW
(003FF173) Dragdrop::TDragDrop::WndMethod
(0034059C) System::Classes::_18201
(000374F1) USER32.dll
(00015C3B) USER32.dll
(0001553C) USER32.dll
(000152FB) USER32.dll.DispatchMessageW

The problem happens rarely. I cannot reproduce it.

<Try to describe precise steps that lead to the problem (where do you click, what keys do you press, what do you see, etc.)>
<If relevant, consider attaching a session log file or a screenshot)>

WinSCP 5.7.7

Error message:
Fehler beim Empfang des entfernten Verzeichnisnamens.

Zugriffsverletzung - ungültiger Zugriff auf den Speicher.

Stack trace:
(0001F030)
(007E08AA) C4799_0
(007E2912) ____ExceptionHandler
(007DF88C) __ExceptionHandler
(0005A7EA) ntdll.dll
(0000F15E) ntdll.dll.KiUserExceptionDispatcher
(00714252) TTerminal::ReadCurrentDirectory
(00710206) TTerminal::ReactOnCommand
(00616007) TUnixDirView::ChangeDirectory
(00614452) TUnixDirView::ExecuteFile
(0021C609) Vcl::Controls::TWinControl::WndProc
(00260537) Vcl::Comctrls::TCustomListView::WndProc
(0034059C) System::Classes::_18201
(000152F7) USER32.dll
(00015D35) USER32.dll
(0001FD32) USER32.dll
(0001FD58) USER32.dll.CallWindowProcW
(003FF173) Dragdrop::TDragDrop::WndMethod
(0034059C) System::Classes::_18201
(000152F7) USER32.dll
(00015D35) USER32.dll
(000167CE) USER32.dll
(00016895) USER32.dll.DispatchMessageW

I know how to reproduce the problem or the problem happens frequently enough. I wish to be contacted by the WinSCP team to help resolving the problem.

Thanks for your report.
I have sent you an email with a debug version of WinSCP to the address you have used to register on this forum.

<Try to describe precise steps that lead to the problem (where do you click, what keys do you press, what do you see, etc.)>
<If relevant, consider attaching a session log file or a screenshot)>

WinSCP 5.7.7

Error message:
Error getting name of current remote directory.

Invalid access to memory.

Stack trace:
(0032F052)WinSCP.exe
(007E08AA) C4799_0
(007E2912) ____ExceptionHandler
(007DF88C) __ExceptionHandler
(0008A61F) ntdll.dll
(00077E7A) ntdll.dll.KiUserExceptionDispatcher
(00714252) TTerminal::ReadCurrentDirectory
(00710206) TTerminal::ReactOnCommand
(00616007) TUnixDirView::ChangeDirectory
(00614452) TUnixDirView::ExecuteFile
(0021C609) Vcl::Controls::TWinControl::WndProc
(00260537) Vcl::Comctrls::TCustomListView::WndProc
(0034059C) System::Classes::_18201
(000374F1) USER32.dll
(00015C3B) USER32.dll
(000159D2) USER32.dll.CallWindowProcW
(00098CBA) COMCTL32.DLL
(00098CA1) COMCTL32.DLL
(00098ADC) COMCTL32.DLL
(000374F1) USER32.dll
(00015C3B) USER32.dll
(000159D2) USER32.dll.CallWindowProcW
(003FF173) Dragdrop::TDragDrop::WndMethod
(0034059C) System::Classes::_18201
(000374F1) USER32.dll
(00015C3B) USER32.dll
(0001553C) USER32.dll
(000152FB) USER32.dll.DispatchMessageW

I know how to reproduce the problem or the problem happens frequently enough. I wish to be contacted by the WinSCP team to help resolving the problem.

Thanks for your report.
I have sent you an email with a debug version of WinSCP to the address you have used to register on this forum.

<Try to describe precise steps that lead to the problem (where do you click, what keys do you press, what do you see, etc.)>
<If relevant, consider attaching a session log file or a screenshot)>

WinSCP 5.7.6

Error message:
Erreur lors l'établissement du nom du répertoire distant.

Accès mémoire invalide.

Trace de la pile :
(0009DC30)
(007E46BA) C4799_3
(007E6722) ____ExceptionHandler
(007E369C) __ExceptionHandler
(0003CF4E) ntdll.dll
(0003CDB6) ntdll.dll.KiUserExceptionDispatcher
(00713702) TTerminal::ReadCurrentDirectory
(0070F6B6) TTerminal::ReactOnCommand
(006154B7) TUnixDirView::ChangeDirectory
(00613902) TUnixDirView::ExecuteFile
(0021C315) Vcl::Controls::TWinControl::WndProc
(00260243) Vcl::Comctrls::TCustomListView::WndProc
(003402A8) System::Classes::_18201
(00006691) USER32.DLL.CallNextHookEx
(00007BA5) USER32.DLL
(0000DE4B) USER32.DLL.CallWindowProcW
(000331A8) COMCTL32.DLL.DefSubclassProc
(0003318A) COMCTL32.DLL.DefSubclassProc
(0002723F) COMCTL32.DLL
(00032F64) COMCTL32.DLL
(00006691) USER32.DLL.CallNextHookEx
(00007BA5) USER32.DLL
(0000DE4B) USER32.DLL.CallWindowProcW
(003FEE7F) Dragdrop::TDragDrop::WndMethod
(003402A8) System::Classes::_18201
(00006691) USER32.DLL.CallNextHookEx
(00007BA5) USER32.DLL
(00007463) USER32.DLL
(00008C3B) USER32.DLL.DispatchMessageW

I know how to reproduce the problem or the problem happens frequently enough. I wish to be contacted by the WinSCP team to help resolving the problem.

<Try to describe precise steps that lead to the problem (where do you click, what keys do you press, what do you see, etc.)>
<If relevant, consider attaching a session log file or a screenshot)>

WinSCP 5.7.7

Error message:
Error getting name of current remote directory.

Invalid access to memory.

Stack trace:
(0062F06D)WinSCP.exe
(007E08AA) C4799_0
(007E2912) ____ExceptionHandler
(007DF88C) __ExceptionHandler
(0008A61F) ntdll.dll
(00077E7A) ntdll.dll.KiUserExceptionDispatcher
(00714252) TTerminal::ReadCurrentDirectory
(00710206) TTerminal::ReactOnCommand
(00616007) TUnixDirView::ChangeDirectory
(006144B6) TUnixDirView::ExecuteParentDirectory
(003D9EB8) Customdirview::TCustomDirView::Execute
(0021C609) Vcl::Controls::TWinControl::WndProc
(00260537) Vcl::Comctrls::TCustomListView::WndProc
(0034059C) System::Classes::_18201
(000374F1) USER32.dll
(00015C3B) USER32.dll
(000159D2) USER32.dll.CallWindowProcW
(00098CBA) COMCTL32.DLL
(00098CA1) COMCTL32.DLL
(00098ADC) COMCTL32.DLL
(000374F1) USER32.dll
(00015C3B) USER32.dll
(000159D2) USER32.dll.CallWindowProcW
(003FF173) Dragdrop::TDragDrop::WndMethod
(0034059C) System::Classes::_18201
(000374F1) USER32.dll
(00015C3B) USER32.dll
(0001553C) USER32.dll
(000152FB) USER32.dll.DispatchMessageW

The problem happens rarely. I cannot reproduce it.

<Try to describe precise steps that lead to the problem (where do you click, what keys do you press, what do you see, etc.)>
<If relevant, consider attaching a session log file or a screenshot)>

WinSCP 5.7.6

Error message:
Erreur lors l'établissement du nom du répertoire distant.

Accès mémoire invalide.

Trace de la pile :
(0000F02E)
(007E46BA) C4799_3
(007E6722) ____ExceptionHandler
(007E369C) __ExceptionHandler
(0005A466) ntdll.dll
(0000F12E) ntdll.dll.KiUserExceptionDispatcher
(00713702) TTerminal::ReadCurrentDirectory
(0070F6B6) TTerminal::ReactOnCommand
(006154B7) TUnixDirView::ChangeDirectory
(00613902) TUnixDirView::ExecuteFile
(0021C315) Vcl::Controls::TWinControl::WndProc
(00260243) Vcl::Comctrls::TCustomListView::WndProc
(003402A8) System::Classes::_18201
(00015235) USER32.dll
(000158E5) USER32.dll
(0001FAAB) USER32.dll
(0001FAD1) USER32.dll.CallWindowProcW
(003FEE7F) Dragdrop::TDragDrop::WndMethod
(003402A8) System::Classes::_18201
(00015235) USER32.dll
(000158E5) USER32.dll
(00016D2C) USER32.dll
(00016DF5) USER32.dll.DispatchMessageW

The problem happens rarely. I cannot reproduce it.

Thanks for your report.
I have sent you an email with a debug version of WinSCP to the address you have used to register on this forum.

<Try to describe precise steps that lead to the problem (where do you click, what keys do you press, what do you see, etc.)>
<If relevant, consider attaching a session log file or a screenshot)>

WinSCP 5.7.7

Error message:
Error getting name of current remote directory.

Invalid access to memory.

Stack trace:
(0062F06D)WinSCP.exe
(007E08AA) C4799_0
(007E2912) ____ExceptionHandler
(007DF88C) __ExceptionHandler
(0007C53F) ntdll.dll
(00069D7A) ntdll.dll.KiUserExceptionDispatcher
(00714252) TTerminal::ReadCurrentDirectory
(00710206) TTerminal::ReactOnCommand
(00616007) TUnixDirView::ChangeDirectory
(00614452) TUnixDirView::ExecuteFile
(0021C609) Vcl::Controls::TWinControl::WndProc
(00260537) Vcl::Comctrls::TCustomListView::WndProc
(0034059C) System::Classes::_18201
(00033921) USER32.dll
(0001378B) USER32.dll
(00013522) USER32.dll.CallWindowProcW
(00076D3A) COMCTL32.DLL
(00076D21) COMCTL32.DLL
(00076B5C) COMCTL32.DLL
(00033921) USER32.dll
(0001378B) USER32.dll
(00013522) USER32.dll.CallWindowProcW
(003FF173) Dragdrop::TDragDrop::WndMethod
(0034059C) System::Classes::_18201
(00033921) USER32.dll
(0001378B) USER32.dll
(0001308C) USER32.dll
(00012E4B) USER32.dll.DispatchMessageW

I know how to reproduce the problem or the problem happens frequently enough. I wish to be contacted by the WinSCP team to help resolving the problem.

Thanks for your report.
I have sent you an email with a debug version of WinSCP to the address you have used to register on this forum.

<Try to describe precise steps that lead to the problem (where do you click, what keys do you press, what do you see, etc.)>
<If relevant, consider attaching a session log file or a screenshot)>

WinSCP 5.7.7

Error message:
Не могу получить имя каталога на сервере.

Ошибка доступа к памяти.

Трассировка стека:
(0010F073)
(007E08AA)
(007E2912)
(007DF88C)
(0003EE3E) ntdll.dll.ZwWow64CallFunction64
(0003F5BA) ntdll.dll.KiUserExceptionDispatcher
(00714252)
(00710206)
(00616007) @TUnixDirView@ChangeDirectory$qqr20System@UnicodeString
(00614452) @TUnixDirView@ExecuteFile$qqrp22Vcl@Comctrls@TListItem
(0021C609)
(00260537)
(0034059C)
(00007E6F) USER32.DLL.CallNextHookEx
(000080CC) USER32.DLL
(0000C6C0) USER32.DLL.CallWindowProcW
(0003D11F) COMCTL32.DLL.DefSubclassProc
(0003D101) COMCTL32.DLL.DefSubclassProc
(0002B1FC) COMCTL32.DLL
(0003CED0) COMCTL32.DLL
(00007E6F) USER32.DLL.CallNextHookEx
(000080CC) USER32.DLL
(0000C6C0) USER32.DLL.CallWindowProcW
(003FF173)
(0034059C)
(00007E6F) USER32.DLL.CallNextHookEx
(000080CC) USER32.DLL
(00009625) USER32.DLL
(0000967B) USER32.DLL.DispatchMessageW

I know how to reproduce the problem or the problem happens frequently enough. I wish to be contacted by the WinSCP team to help resolving the problem.