Differences

This shows you the differences between the selected revisions of the page.

rawsettings 2016-07-29		rawsettings 2024-10-23 (current)
	Line 1:		Line 1:
	====== Raw Site Settings ======		====== Raw Site Settings ======
	You can use raw site settings to setup advanced site settings.		You can use raw site settings to setup advanced site settings.
		+
		+	In GUI, when configuring advanced settings which are not available on [[ui_login_advanced\|Advanced Site Settings dialog]], use [[ui_login_raw\|Raw Site Settings dialog]].

	In [[scripting]], use ''[[scriptcommand_open#rawsettings\|-rawsettings]]'' switch of scripting command ''[[scriptcommand_open\|open]]'' (when the settings cannot be configured using [[session_url\|session URL]] nor using any dedicated switch of the command).		In [[scripting]], use ''[[scriptcommand_open#rawsettings\|-rawsettings]]'' switch of scripting command ''[[scriptcommand_open\|open]]'' (when the settings cannot be configured using [[session_url\|session URL]] nor using any dedicated switch of the command).

	In [[library\|.NET assembly]], use ''[[library_sessionoptions_addrawsettings\|SessionOptions.AddRawSettings]]'' method (when the settings cannot be configured using any dedicated property of ''[[library_sessionoptions\|SessionOptions]]'' class).		In [[library\|.NET assembly]], use ''[[library_sessionoptions_addrawsettings\|SessionOptions.AddRawSettings]]'' method (when the settings cannot be configured using any dedicated property of ''[[library_sessionoptions\|SessionOptions]]'' class).
		+
		+	For both scripting and .NET assembly, you can just configure the advanced settings on [[ui_login_advanced\|Advanced Site Settings dialog]] and have WinSCP [[ui_generateurl\|generate the code for you]].
		+
		+	See also [[rawtransfersettings\|raw transfer settings]] and [[rawconfig\|raw configuration]].

	You will also use raw site settings syntax to mass-modify stored sites using ''[[commandline#batchsettings\|/batchsettings]]'' command-line parameter.		You will also use raw site settings syntax to mass-modify stored sites using ''[[commandline#batchsettings\|/batchsettings]]'' command-line parameter.
	Line 11:		Line 17:

	^ Name ^ Description ^ Values ^		^ Name ^ Description ^ Values ^
-	\| ''PingType'' \| [[ui_login_connection#keepalives\|Keepalives]] ((Enabling keepalives has very limited effect in [[scripting]] (except for ''[[scriptcommand_keepuptodate\|keepuptodate]]'' command) and almost no effect in [[library\|.NET assembly]].)) \| ''0'' = Off, ''1'' = Sending of null SSH packets, ''2'' = Executing dummy protocol commands \|	+	\| ''==PingType=='' \| [[ui_login_connection#keepalives\|Keepalives]] ((Enabling keepalives has very limited effect in [[scripting]] (except for ''[[scriptcommand_keepuptodate\|keepuptodate]]'' command) and almost no effect in [[library\|.NET assembly]].)) \| ''0'' = Off, ''1'' = Sending of null SSH packets, ''2'' = Executing dummy protocol commands \|
	\| ''PingIntervalSecs'' \| Seconds between keepalives \| \|		\| ''PingIntervalSecs'' \| Seconds between keepalives \| \|
-	\| ''ProxyMethod'' \| [[ui_login_proxy\|Proxy type]] \| ''0'' = None, ''1'' = SOCKS4, ''2'' = SOCKS5, ''3'' = HTTP, ''4'' = Telnet (SFTP/SCP protocols only), ''5'' = Local (SFTP/SCP), For additional options with FTP protocol, see ''FtpProxyLogonType'' \|	+	\| ''==EncryptKeyPlain=='' \| [[ui_login_encryption\|File encryption key]] \| \|
		+	\| ''==ProxyMethod=='' \| [[ui_login_proxy\|Proxy type]] \| ''0''/''None'', ''1''/''SOCKS4'', ''2''/''SOCKS5'', ''3''/''%%HTTP%%'', ''4''/''Telnet'' (SFTP/SCP protocols only), ''5''/''Cmd'' = Local (SFTP/SCP). For additional options with FTP protocol, see ''FtpProxyLogonType''. //Symbolical value names are supported by the latest version only.// &recent \|
	\| ''ProxyHost'' \| Proxy host name \| \|		\| ''ProxyHost'' \| Proxy host name \| \|
	\| ''ProxyPort'' \| Proxy port number \| \|		\| ''ProxyPort'' \| Proxy port number \| \|
	Line 19:		Line 26:
	\| ''ProxyPassword'' \| Proxy password \| \|		\| ''ProxyPassword'' \| Proxy password \| \|
	\| ''FtpProxyLogonType'' \| [[ui_login_proxy\|FTP proxy types]] \| ''1'' = ''SITE %host'', ''2'' = ''USER %proxyuser, USER %user@%host'', ''3'' = ''OPEN %host'', ''4'' = ''USER %proxyuser, USER %user'', ''5'' = ''USER %user@%host'', ''6'' = ''USER %proxyuser@%host'', ''7'' = ''USER %user@%host %proxyuser'', ''8'' = ''USER %user@%proxyuser@%host'' \|		\| ''FtpProxyLogonType'' \| [[ui_login_proxy\|FTP proxy types]] \| ''1'' = ''SITE %host'', ''2'' = ''USER %proxyuser, USER %user@%host'', ''3'' = ''OPEN %host'', ''4'' = ''USER %proxyuser, USER %user'', ''5'' = ''USER %user@%host'', ''6'' = ''USER %proxyuser@%host'', ''7'' = ''USER %user@%host %proxyuser'', ''8'' = ''USER %user@%proxyuser@%host'' \|
-	\| ''ProxyDNS'' \| [[ui_login_proxy#dns\|Do DNS name lookup at proxy end]] \| ''0'' = Off, ''1'' = On, ''3'' = Auto \|	+	\| ''ProxyDNS'' \| [[ui_login_proxy#dns\|Do DNS name lookup at proxy end]] \| ''0'' = No, ''1'' = Auto, ''2'' = Yes \|
-	\| ''ProxyLocalhost'' \| [[ui_login_proxy#localhost\|Consider proxying local host connections]] \| ''0'' = Off, ''1'' = On \|	+	\| ''ProxyLocalhost'' \| [[ui_login_proxy#localhost\|Consider proxying local host connections]] \| ''0''/''off'' = Off, ''1''/''on'' = On \|
	\| ''ProxyTelnetCommand'' \| [[ui_login_proxy#command\|Telnet proxy command]] \| \|		\| ''ProxyTelnetCommand'' \| [[ui_login_proxy#command\|Telnet proxy command]] \| \|
	\| ''ProxyLocalCommand'' \| [[ui_login_proxy#command\|Local proxy command]] \| \|		\| ''ProxyLocalCommand'' \| [[ui_login_proxy#command\|Local proxy command]] \| \|
-	\| ''Compression'' \| [[ui_login_ssh#protocol_options\|SSH session compression]] \| ''0'' = Disabled, ''1'' = Enabled \|	+	\| ''==Compression=='' \| [[ui_login_ssh#protocol_options\|SSH session compression]] \| ''0''/''off'' = Disabled, ''1''/''on'' = Enabled \|
-	\| ''SshProt'' \| [[ui_login_ssh#protocol_options\|SSH protocol version]] \| ''0'' = SSH-1, ''3'' = SSH-2 \|	+	\| ''==AddressFamily=='' \| [[ui_login_connection#ipv\|Internet Protocol Version]] \| ''0'' = Auto, ''1'' = IPv4, ''2'' = IPv6 \|
-	\| ''SshNoUserAuth'' \| [[ui_login_authentication#bypassing_authentication\|Bypass authentication entirely]] \| ''0'' = Disabled, ''1'' = Enabled \|	+	\| ''SshNoUserAuth'' \| [[ui_login_authentication#bypassing\|Bypass authentication entirely]] \| ''0''/''off'' = Disabled, ''1''/''on'' = Enabled \|
-	\| ''Cipher'' \| [[ui_login_ssh#encryption_options\|SSH encryption cipher selection policy]] \| Comma-separated list of cipher preference order, where names of ciphers are ''aes'', ''blowfish'', ''3des'', ''arcfour'' and ''des''. Token ''WARN'' is used to delimit substandard ciphers. Example: ''blowfish,aes,3des,WARN,arcfour,des'' \|	+	\| ''==Cipher=='' \| [[ui_login_ssh#encryption_options\|SSH encryption cipher selection policy]] \| Comma-separated list of cipher preference order, where names of ciphers are ''aes'', ''chacha20'', ''aesgcm'', ''3des'', ''des'', ''blowfish'' and ''arcfour''. Token ''WARN'' is used to delimit substandard ciphers. Example: ''blowfish,aes,3des,WARN,arcfour,des'' \|
-	\| ''KEX'' \| [[ui_login_kex\|Key exchange algorithm selection policy]] \| Comma-separated list of KEX preference order, where names of KEXes are ''ecdh'', ''dh-gex-sha1'', ''dh-group14-sha1'', ''rsa'', and ''dh-group1-sha1''. Token ''WARN'' is used to delimit substandard KEXes. Example: ''ecdh,dh-gex-sha1,dh-group14-sha1,rsa,WARN,dh-group1-sha1'' \|	+	\| ''==KEX=='' \| [[ui_login_kex\|Key exchange algorithm selection policy]] \| Comma-separated list of KEX preference order, where names of KEXes are ''ecdh'' (ECDH), ''dh-gex-sha1'' (DH Group Exchange), ''dh-group14-sha1'' (DH group 14), ''rsa'' (RSA-based), and ''dh-group1-sha1'' (DH group 1). Token ''WARN'' is used to delimit substandard KEXes. Example: ''ecdh,dh-gex-sha1,dh-group14-sha1,rsa,WARN,dh-group1-sha1'' \|
-	\| ''AuthKI'' \| [[ui_login_authentication#gssapi\|Attempt keyboard-interactive authentication]] \| ''0'' = Disabled, ''1'' = Enabled \|	+	\| ''==HostKey=='' \| Host key algorithm selection policy \| Comma-separated list of algorithm preference order, where names of algorithms are ''ed448'', ''rsa'', ''dsa'', ''ecdsa'' and ''ed25519''. Token ''WARN'' can used to delimit substandard algorithms. Example: ''ed448,ed25519,ecdsa,rsa,dsa,WARN'' \|
-	\| ''AuthGSSAPI'' \| [[ui_login_authentication#gssapi\|Attempt GSSAPI authentication]] \| ''0'' = Disabled, ''1'' = Enabled \|	+	\| ''RekeyBytes'' \| [[ui_login_kex\|Max data before rekey]] \| \|
-	\| ''TryAgent'' \| [[ui_login_authentication\|Attempt Authentication Using Pageant]] \| ''0'' = Disabled, ''1'' = Enabled \|	+	\| ''AuthKI'' \| [[ui_login_authentication#gssapi\|Attempt keyboard-interactive authentication]] \| ''0''/''off'' = Disabled, ''1''/''on'' = Enabled \|
		+	\| ''==AuthGSSAPI=='' \| [[ui_login_authentication#gssapi\|Attempt GSSAPI authentication]] \| ''0''/''off'' = Disabled, ''1''/''on'' = Enabled \|
		+	\| ''TryAgent'' \| [[ui_login_authentication\|Attempt Authentication Using Pageant]] \| ''0''/''off'' = Disabled, ''1''/''on'' = Enabled \|
		+	\| ''==LogicalHostName=='' \| Logical name of remote host/GSSAPI/SSPI/Kerberos Service principal name/Server realm \| \|
		+	\| ''==SourceAddress=='' \| Source IPv4 address (network interface) of outgoing SSH connection \| \|
		+	\| ''==GSSLibs=='' \| Preference order of %%GSSAPI%% libraries \| Comma ('','') separated list of ''gssapi32'', ''sspi'' and ''custom''. \|
		+	\| ''GSSCustom'' \| User-supplied %%GSSAPI%% library path \| \|
	\| ''FtpAccount'' \| [[ui_login_ftp\|FTP account]] \| \|		\| ''FtpAccount'' \| [[ui_login_ftp\|FTP account]] \| \|
-	\| ''FtpForcePasvIp2'' \| [[ui_login_ftp\|Force IP address for passive mode connections]] \| ''0'' = On, ''1'' = Off, ''2'' = Auto \|	+	\| ''==FtpForcePasvIp2=='' \| [[ui_login_ftp\|Force IP address for passive mode connections]] \| ''0''/''on'' = On, ''1''/''off'' = Off, ''2''/''auto'' = Auto \|
-	\| ''FtpUseMlsd'' \| [[ui_login_ftp\|Use MLSD command for directory listing]] \| ''0'' = On, ''1'' = Off, ''2'' = Auto \|	+	\| ''==FtpUseMlsd=='' \| [[ui_login_ftp\|Use MLSD command for directory listing]] \| ''0''/''on'' = On, ''1''/''off'' = Off, ''2''/''auto'' = Auto \|
-	\| ''Tunnel'' \| [[tunneling\|Connection tunneling]] \| ''0'' = Disabled, ''1'' = Enabled \|	+	\| ''==FtpListAll=='' \| [[ui_login_ftp\|Support for listing of hidden files]] \| ''0''/''on'' = On, ''1''/''off'' = Off, ''2''/''auto'' = Auto \|
		+	\| ''==FtpAnyCodeForPwd=='' \| Allow any 2xx response code to FTP ''PWD'' command \| ''0''/''off'' = Disabled, ''1''/''on'' = Enabled \|
		+	\| ''==FtpWorkFromCwd=='' \| Always change working directory before FTP commands. \| ''0''/''on'' = On, ''1''/''off'' = Off, ''2''/''auto'' = Auto (use on VMS servers) \|
		+	\| ''==S3CredentialsEnv=='' \| [[ui_login#read_credentials\|Credentials from AWS environment]] \| ''0''/''off'' = Disabled, ''1''/''on'' = Enabled \|
		+	\| ''Tunnel'' \| [[tunneling\|Connection tunneling]] \| ''0''/''off'' = Disabled, ''1''/''on'' = Enabled \|
	\| ''TunnelHostName'' \| Tunnel host name \| \|		\| ''TunnelHostName'' \| Tunnel host name \| \|
	\| ''TunnelPortNumber'' \| Tunnel port number \| \|		\| ''TunnelPortNumber'' \| Tunnel port number \| \|
	\| ''TunnelUserName'' \| Tunnel user name \| \|		\| ''TunnelUserName'' \| Tunnel user name \| \|
	\| ''TunnelPasswordPlain'' \| Tunnel password \| \|		\| ''TunnelPasswordPlain'' \| Tunnel password \| \|
-	\| ''TunnelHostKey'' \| Fingerprint of expected SSH tunnel host key \| \|	+	\| ''==TunnelHostKey=='' \| Fingerprint of expected SSH tunnel host key \| \|
	\| ''TunnelPublicKeyFile'' \| Path to tunnel private key file \| \|		\| ''TunnelPublicKeyFile'' \| Path to tunnel private key file \| \|
-	\| ''Utf'' \| [[ui_login_environment#utf\|UTF-8 Encoding for Filenames]] \| ''0'' = Off, ''1'' = On, ''2'' = Auto \|	+	\| ''==TunnelLocalPortNumber=='' \| [[ui_login_tunnel#tunnel_options\|Local tunnel port]] \| ''0'' = Autodetect \|
		+	\| ''==Utf=='' \| [[ui_login_environment#utf\|UTF-8 Encoding for Filenames]] \| ''0'' = Off, ''1'' = On, ''2'' = Auto \|
	\| ''Shell'' \| [[ui_login_scp#shell\|Shell]] ([[scp\|SCP protocol]]) \| \|		\| ''Shell'' \| [[ui_login_scp#shell\|Shell]] ([[scp\|SCP protocol]]) \| \|
-	\| ''LookupUserGroups2'' \| [[ui_login_scp#other_options\|Lookup user groups]] \| ''0'' = On, ''1'' = Off, ''2'' = Auto \|	+	\| ''==ListingCommand=='' \| [[ui_login_scp#directory_listing\|Listing command]] \| \|
-	\| ''LocalDirectory'' \| [[ui_login_directories\|Local Directory]]((Note that //Remote Directory// can be set using [[session_url\|session URL]], you do not need to use raw site settings for it.)) \| \|	+	\| ''LookupUserGroups2'' \| [[ui_login_scp#other_options\|Lookup user groups]] \| ''0''/''on'' = On, ''1''/''off'' = Off, ''2''/''auto'' = Auto \|
		+	\| ''==LocalDirectory=='' \| [[ui_login_directories\|Local Directory]]((Note that //Remote Directory// can be set using [[session_url\|session URL]], you do not need to use raw site settings for it.)) \| \|
		+	\| ''==TimeDifference=='' \| [[ui_login_environment#timezone\|Time zone offset]] \| Hexadecimal representation of 64-bit IEEE 754 floating point number (double), representing the offset in days. \\ Example: ''555555555555A5BF'' = -1 hour((In C# you can calculate -1 hour offset using: ''%%string.Join("", BitConverter.GetBytes(TimeSpan.FromHours(-1).TotalDays).Select(b => b.ToString("X2")))%%''.)) \|
	\| ''ConsiderDST'' \| [[ui_login_environment#dst\|Daylight Saving Time]] \| ''0'' = Adjust remote timestamp with DST, ''1'' = Adjust remote timestamp to local conventions, ''2'' = Preserve remote timestamp \|		\| ''ConsiderDST'' \| [[ui_login_environment#dst\|Daylight Saving Time]] \| ''0'' = Adjust remote timestamp with DST, ''1'' = Adjust remote timestamp to local conventions, ''2'' = Preserve remote timestamp \|
-	\| ''FollowDirectorySymlinks'' \| [[ui_login_directories#directory_reading_options\|Follow symbolic links to directories]] \| ''0'' = Disabled, ''1'' = Enabled \|	+	\| ''ResolveSymlinks'' \| [[ui_login_directories#directory_reading_options\|Resolve symbolic links]] \| ''0''/''off'' = Disabled, ''1''/''on'' = Enabled \|
-	\| ''SftpServer'' \| Path to [[ui_login_sftp\|SFTP server binary]] \| For example ''sudo su -c /bin/sftp-server'' \|	+	\| ''FollowDirectorySymlinks'' \| [[ui_login_directories#directory_reading_options\|Follow symbolic links to directories]] \| ''0''/''off'' = Disabled, ''1''/''on'' = Enabled \|
-	\| ''SFTPMaxVersion'' \| [[ui_login_sftp\|Preferred SFTP protocol version]] \| ''0''-''5'' = SFTP version number \|	+	\| ''==ExitCode1IsError=='' \| Consider exit code 1 from [[remote_command\|remote commands]] as an error. \| ''0''/''off'' = Disabled, ''1''/''on'' = Enabled \|
		+	\| ''==SftpServer=='' \| Path to [[ui_login_sftp\|SFTP server binary]] \| For example ''sudo su -c /bin/sftp-server'' \|
		+	\| ''SFTPMaxVersion'' \| [[ui_login_sftp\|Preferred SFTP protocol version]] \| ''0''–''5'' = SFTP version number \|
		+	\| ''==SFTPRealPath=='' \| Canonicalize SFTP paths \| ''0''/''on'' = On, ''1''/''off'' = Off, ''2''/''auto'' = Auto \|
	\| ''MinTlsVersion'' \| [[ui_login_tls\|Minimum TLS/SSL version]] \| ''3'' = SSL 3.0, ''10'' = TLS 1.0, ''11'' = TLS 1.1, ''12'' = TLS 1.2 \|		\| ''MinTlsVersion'' \| [[ui_login_tls\|Minimum TLS/SSL version]] \| ''3'' = SSL 3.0, ''10'' = TLS 1.0, ''11'' = TLS 1.1, ''12'' = TLS 1.2 \|
	\| ''MaxTlsVersion'' \| [[ui_login_tls\|Maximum TLS/SSL version]] \| See ''MinTlsVersion'' \|		\| ''MaxTlsVersion'' \| [[ui_login_tls\|Maximum TLS/SSL version]] \| See ''MinTlsVersion'' \|
-	\| ''SendBuf'' \| [[ui_login_connection#connection\|Optimize connection buffer size]] \| ''0'' = Off, Any positive value = On, value indicates size of the buffer, with recommended value of ''262144'' \\ The ''SshSimple'' may need to be set to ''1'' to disable some of the optimizations, that unchecking the GUI option disables. \|	+	\| ''==SendBuf=='' \| [[ui_login_connection#connection\|Optimize connection buffer size]] \| ''0'' = Off, Any positive value = On, value indicates size of the buffer, with recommended value of ''262144'' \\ The ''SshSimple'' may need to be set to ''0'' to disable some of the optimizations, that unchecking the GUI option disables. \|
-	\| ''EOLType'' \| [[ui_login_environment\|End-of-line characters]] \| ''0'' = LF, ''1'' = CRLF \|	+	\| ''==EOLType=='' \| [[ui_login_environment\|End-of-line characters]] \| ''0'' = LF, ''1'' = CRLF \|
-	\| ''PostLoginCommands'' \| [[ui_login_ftp\|FTP Post login commands]] \| If you need to execute multiple commands, separate them by new-line (line-feed, hexadecimal UTF-8 code ''0A''). I.e. in scripting use ''%0A'' (''-rawsettings PostLoginCommands=CMD1%0ACMD2''), in C# use ''\n'', in PowerShell use ''%%`n%%'' \|	+	\| ''==TrimVMSVersions=='' \| [[ui_login_environment\|Trim VMS Version Numbers]] \| ''0''/''off'' = Off, ''1''/''on'' = On \|
		+	\| ''==PostLoginCommands=='' \| [[ui_login_ftp\|FTP Post login commands]] \| If you need to execute multiple commands, separate them by new-line (line-feed, hexadecimal UTF-8 code ''0A''). I.e. in scripting use ''%0A'' (''-rawsettings PostLoginCommands=CMD1%0ACMD2''), in C# use ''\n'', in PowerShell use ''%%`n%%'' \|
		+	\| ''==InternalEditorEncoding=='' \| Override of default internal editor encoding \| ''-1'' = use [[ui_pref_editor_internal#display\|global preferences]], ''0'' = ANSI encoding, ''65001'' = UTF-8 encoding. \|
		+	\| ''==DeleteToRecycleBin=='' \| [[ui_login_recycle_bin\|Preserve deleted remote files to recycle bin]] \| ''0''/''off'' = Off, ''1''/''on'' = On \|
		+	\| ''OverwrittenToRecycleBin'' \| [[ui_login_recycle_bin\|Preserve overwritten remote files to recycle bin]] \| ''0''/''off'' = Off, ''1''/''on'' = On \|
		+	\| ''RecycleBinPath'' \| [[ui_login_recycle_bin\|Remote recycle bin]] \| \|
		+	\| ''==ProtocolFeatures=='' \| Protocol features override \| Comma-separated list of features override. If the list starts with ''*'', it completely overrides protocol features. If not, individual listed features should start with ''-'' or ''+'', to remove or add the feature. For SFTP protocol, it overrides SFTP extensions list. For FTP protocol, it overrides features declared by ''FEAT'' command response. \|

-	===== Other Settings =====	+	===== [[example]] Example =====
-		+
-	To find correct syntax for settings not listed above, configure the setting in the GUI, store it into a [[session_configuration#site\|site]], [[config\|save configuration to an INI file]] and use the same syntax as you find an INI file.	+
-		+
-	===== Example =====	+
	For example to enable HTTP proxy, in [[scripting]]:		For example to enable HTTP proxy, in [[scripting]]:

	Line 72:		Line 97:
	$sessionOptions.AddRawSettings("ProxyHost", "proxy")		$sessionOptions.AddRawSettings("ProxyHost", "proxy")
	</code>		</code>
		+
		+	===== [[keywords]] Keywords =====
		+
		+	For boolean settings that have values ''0'' for //Off/Disabled// and ''1'' for //On/Enabled// (like [[#authgssapi\|''AuthGSSAPI'']]), you can use ''off'' and ''on'' keywords instead.
		+
		+	For settings that have values ''0'' for //On//, ''1'' for //Off// and ''2'' for //Auto// (like [[#ftpusemlsd\|''FtpUseMlsd'']]), you can use ''on''/''off''/''auto'' keywords instead.

rawsettings 2016-07-29		rawsettings 2024-10-23 (current)
	Line 1:		Line 1:
	====== Raw Site Settings ======		====== Raw Site Settings ======
	You can use raw site settings to setup advanced site settings.		You can use raw site settings to setup advanced site settings.
		+
		+	In GUI, when configuring advanced settings which are not available on [[ui_login_advanced\|Advanced Site Settings dialog]], use [[ui_login_raw\|Raw Site Settings dialog]].

	In [[scripting]], use ''[[scriptcommand_open#rawsettings\|-rawsettings]]'' switch of scripting command ''[[scriptcommand_open\|open]]'' (when the settings cannot be configured using [[session_url\|session URL]] nor using any dedicated switch of the command).		In [[scripting]], use ''[[scriptcommand_open#rawsettings\|-rawsettings]]'' switch of scripting command ''[[scriptcommand_open\|open]]'' (when the settings cannot be configured using [[session_url\|session URL]] nor using any dedicated switch of the command).

	In [[library\|.NET assembly]], use ''[[library_sessionoptions_addrawsettings\|SessionOptions.AddRawSettings]]'' method (when the settings cannot be configured using any dedicated property of ''[[library_sessionoptions\|SessionOptions]]'' class).		In [[library\|.NET assembly]], use ''[[library_sessionoptions_addrawsettings\|SessionOptions.AddRawSettings]]'' method (when the settings cannot be configured using any dedicated property of ''[[library_sessionoptions\|SessionOptions]]'' class).
		+
		+	For both scripting and .NET assembly, you can just configure the advanced settings on [[ui_login_advanced\|Advanced Site Settings dialog]] and have WinSCP [[ui_generateurl\|generate the code for you]].
		+
		+	See also [[rawtransfersettings\|raw transfer settings]] and [[rawconfig\|raw configuration]].

	You will also use raw site settings syntax to mass-modify stored sites using ''[[commandline#batchsettings\|/batchsettings]]'' command-line parameter.		You will also use raw site settings syntax to mass-modify stored sites using ''[[commandline#batchsettings\|/batchsettings]]'' command-line parameter.
	Line 11:		Line 17:

	^ Name ^ Description ^ Values ^		^ Name ^ Description ^ Values ^
-	\| ''PingType'' \| [[ui_login_connection#keepalives\|Keepalives]] ((Enabling keepalives has very limited effect in [[scripting]] (except for ''[[scriptcommand_keepuptodate\|keepuptodate]]'' command) and almost no effect in [[library\|.NET assembly]].)) \| ''0'' = Off, ''1'' = Sending of null SSH packets, ''2'' = Executing dummy protocol commands \|	+	\| ''==PingType=='' \| [[ui_login_connection#keepalives\|Keepalives]] ((Enabling keepalives has very limited effect in [[scripting]] (except for ''[[scriptcommand_keepuptodate\|keepuptodate]]'' command) and almost no effect in [[library\|.NET assembly]].)) \| ''0'' = Off, ''1'' = Sending of null SSH packets, ''2'' = Executing dummy protocol commands \|
	\| ''PingIntervalSecs'' \| Seconds between keepalives \| \|		\| ''PingIntervalSecs'' \| Seconds between keepalives \| \|
-	\| ''ProxyMethod'' \| [[ui_login_proxy\|Proxy type]] \| ''0'' = None, ''1'' = SOCKS4, ''2'' = SOCKS5, ''3'' = HTTP, ''4'' = Telnet (SFTP/SCP protocols only), ''5'' = Local (SFTP/SCP), For additional options with FTP protocol, see ''FtpProxyLogonType'' \|	+	\| ''==EncryptKeyPlain=='' \| [[ui_login_encryption\|File encryption key]] \| \|
		+	\| ''==ProxyMethod=='' \| [[ui_login_proxy\|Proxy type]] \| ''0''/''None'', ''1''/''SOCKS4'', ''2''/''SOCKS5'', ''3''/''%%HTTP%%'', ''4''/''Telnet'' (SFTP/SCP protocols only), ''5''/''Cmd'' = Local (SFTP/SCP). For additional options with FTP protocol, see ''FtpProxyLogonType''. //Symbolical value names are supported by the latest version only.// &recent \|
	\| ''ProxyHost'' \| Proxy host name \| \|		\| ''ProxyHost'' \| Proxy host name \| \|
	\| ''ProxyPort'' \| Proxy port number \| \|		\| ''ProxyPort'' \| Proxy port number \| \|
	Line 19:		Line 26:
	\| ''ProxyPassword'' \| Proxy password \| \|		\| ''ProxyPassword'' \| Proxy password \| \|
	\| ''FtpProxyLogonType'' \| [[ui_login_proxy\|FTP proxy types]] \| ''1'' = ''SITE %host'', ''2'' = ''USER %proxyuser, USER %user@%host'', ''3'' = ''OPEN %host'', ''4'' = ''USER %proxyuser, USER %user'', ''5'' = ''USER %user@%host'', ''6'' = ''USER %proxyuser@%host'', ''7'' = ''USER %user@%host %proxyuser'', ''8'' = ''USER %user@%proxyuser@%host'' \|		\| ''FtpProxyLogonType'' \| [[ui_login_proxy\|FTP proxy types]] \| ''1'' = ''SITE %host'', ''2'' = ''USER %proxyuser, USER %user@%host'', ''3'' = ''OPEN %host'', ''4'' = ''USER %proxyuser, USER %user'', ''5'' = ''USER %user@%host'', ''6'' = ''USER %proxyuser@%host'', ''7'' = ''USER %user@%host %proxyuser'', ''8'' = ''USER %user@%proxyuser@%host'' \|
-	\| ''ProxyDNS'' \| [[ui_login_proxy#dns\|Do DNS name lookup at proxy end]] \| ''0'' = Off, ''1'' = On, ''3'' = Auto \|	+	\| ''ProxyDNS'' \| [[ui_login_proxy#dns\|Do DNS name lookup at proxy end]] \| ''0'' = No, ''1'' = Auto, ''2'' = Yes \|
-	\| ''ProxyLocalhost'' \| [[ui_login_proxy#localhost\|Consider proxying local host connections]] \| ''0'' = Off, ''1'' = On \|	+	\| ''ProxyLocalhost'' \| [[ui_login_proxy#localhost\|Consider proxying local host connections]] \| ''0''/''off'' = Off, ''1''/''on'' = On \|
	\| ''ProxyTelnetCommand'' \| [[ui_login_proxy#command\|Telnet proxy command]] \| \|		\| ''ProxyTelnetCommand'' \| [[ui_login_proxy#command\|Telnet proxy command]] \| \|
	\| ''ProxyLocalCommand'' \| [[ui_login_proxy#command\|Local proxy command]] \| \|		\| ''ProxyLocalCommand'' \| [[ui_login_proxy#command\|Local proxy command]] \| \|
-	\| ''Compression'' \| [[ui_login_ssh#protocol_options\|SSH session compression]] \| ''0'' = Disabled, ''1'' = Enabled \|	+	\| ''==Compression=='' \| [[ui_login_ssh#protocol_options\|SSH session compression]] \| ''0''/''off'' = Disabled, ''1''/''on'' = Enabled \|
-	\| ''SshProt'' \| [[ui_login_ssh#protocol_options\|SSH protocol version]] \| ''0'' = SSH-1, ''3'' = SSH-2 \|	+	\| ''==AddressFamily=='' \| [[ui_login_connection#ipv\|Internet Protocol Version]] \| ''0'' = Auto, ''1'' = IPv4, ''2'' = IPv6 \|
-	\| ''SshNoUserAuth'' \| [[ui_login_authentication#bypassing_authentication\|Bypass authentication entirely]] \| ''0'' = Disabled, ''1'' = Enabled \|	+	\| ''SshNoUserAuth'' \| [[ui_login_authentication#bypassing\|Bypass authentication entirely]] \| ''0''/''off'' = Disabled, ''1''/''on'' = Enabled \|
-	\| ''Cipher'' \| [[ui_login_ssh#encryption_options\|SSH encryption cipher selection policy]] \| Comma-separated list of cipher preference order, where names of ciphers are ''aes'', ''blowfish'', ''3des'', ''arcfour'' and ''des''. Token ''WARN'' is used to delimit substandard ciphers. Example: ''blowfish,aes,3des,WARN,arcfour,des'' \|	+	\| ''==Cipher=='' \| [[ui_login_ssh#encryption_options\|SSH encryption cipher selection policy]] \| Comma-separated list of cipher preference order, where names of ciphers are ''aes'', ''chacha20'', ''aesgcm'', ''3des'', ''des'', ''blowfish'' and ''arcfour''. Token ''WARN'' is used to delimit substandard ciphers. Example: ''blowfish,aes,3des,WARN,arcfour,des'' \|
-	\| ''KEX'' \| [[ui_login_kex\|Key exchange algorithm selection policy]] \| Comma-separated list of KEX preference order, where names of KEXes are ''ecdh'', ''dh-gex-sha1'', ''dh-group14-sha1'', ''rsa'', and ''dh-group1-sha1''. Token ''WARN'' is used to delimit substandard KEXes. Example: ''ecdh,dh-gex-sha1,dh-group14-sha1,rsa,WARN,dh-group1-sha1'' \|	+	\| ''==KEX=='' \| [[ui_login_kex\|Key exchange algorithm selection policy]] \| Comma-separated list of KEX preference order, where names of KEXes are ''ecdh'' (ECDH), ''dh-gex-sha1'' (DH Group Exchange), ''dh-group14-sha1'' (DH group 14), ''rsa'' (RSA-based), and ''dh-group1-sha1'' (DH group 1). Token ''WARN'' is used to delimit substandard KEXes. Example: ''ecdh,dh-gex-sha1,dh-group14-sha1,rsa,WARN,dh-group1-sha1'' \|
-	\| ''AuthKI'' \| [[ui_login_authentication#gssapi\|Attempt keyboard-interactive authentication]] \| ''0'' = Disabled, ''1'' = Enabled \|	+	\| ''==HostKey=='' \| Host key algorithm selection policy \| Comma-separated list of algorithm preference order, where names of algorithms are ''ed448'', ''rsa'', ''dsa'', ''ecdsa'' and ''ed25519''. Token ''WARN'' can used to delimit substandard algorithms. Example: ''ed448,ed25519,ecdsa,rsa,dsa,WARN'' \|
-	\| ''AuthGSSAPI'' \| [[ui_login_authentication#gssapi\|Attempt GSSAPI authentication]] \| ''0'' = Disabled, ''1'' = Enabled \|	+	\| ''RekeyBytes'' \| [[ui_login_kex\|Max data before rekey]] \| \|
-	\| ''TryAgent'' \| [[ui_login_authentication\|Attempt Authentication Using Pageant]] \| ''0'' = Disabled, ''1'' = Enabled \|	+	\| ''AuthKI'' \| [[ui_login_authentication#gssapi\|Attempt keyboard-interactive authentication]] \| ''0''/''off'' = Disabled, ''1''/''on'' = Enabled \|
		+	\| ''==AuthGSSAPI=='' \| [[ui_login_authentication#gssapi\|Attempt GSSAPI authentication]] \| ''0''/''off'' = Disabled, ''1''/''on'' = Enabled \|
		+	\| ''TryAgent'' \| [[ui_login_authentication\|Attempt Authentication Using Pageant]] \| ''0''/''off'' = Disabled, ''1''/''on'' = Enabled \|
		+	\| ''==LogicalHostName=='' \| Logical name of remote host/GSSAPI/SSPI/Kerberos Service principal name/Server realm \| \|
		+	\| ''==SourceAddress=='' \| Source IPv4 address (network interface) of outgoing SSH connection \| \|
		+	\| ''==GSSLibs=='' \| Preference order of %%GSSAPI%% libraries \| Comma ('','') separated list of ''gssapi32'', ''sspi'' and ''custom''. \|
		+	\| ''GSSCustom'' \| User-supplied %%GSSAPI%% library path \| \|
	\| ''FtpAccount'' \| [[ui_login_ftp\|FTP account]] \| \|		\| ''FtpAccount'' \| [[ui_login_ftp\|FTP account]] \| \|
-	\| ''FtpForcePasvIp2'' \| [[ui_login_ftp\|Force IP address for passive mode connections]] \| ''0'' = On, ''1'' = Off, ''2'' = Auto \|	+	\| ''==FtpForcePasvIp2=='' \| [[ui_login_ftp\|Force IP address for passive mode connections]] \| ''0''/''on'' = On, ''1''/''off'' = Off, ''2''/''auto'' = Auto \|
-	\| ''FtpUseMlsd'' \| [[ui_login_ftp\|Use MLSD command for directory listing]] \| ''0'' = On, ''1'' = Off, ''2'' = Auto \|	+	\| ''==FtpUseMlsd=='' \| [[ui_login_ftp\|Use MLSD command for directory listing]] \| ''0''/''on'' = On, ''1''/''off'' = Off, ''2''/''auto'' = Auto \|
-	\| ''Tunnel'' \| [[tunneling\|Connection tunneling]] \| ''0'' = Disabled, ''1'' = Enabled \|	+	\| ''==FtpListAll=='' \| [[ui_login_ftp\|Support for listing of hidden files]] \| ''0''/''on'' = On, ''1''/''off'' = Off, ''2''/''auto'' = Auto \|
		+	\| ''==FtpAnyCodeForPwd=='' \| Allow any 2xx response code to FTP ''PWD'' command \| ''0''/''off'' = Disabled, ''1''/''on'' = Enabled \|
		+	\| ''==FtpWorkFromCwd=='' \| Always change working directory before FTP commands. \| ''0''/''on'' = On, ''1''/''off'' = Off, ''2''/''auto'' = Auto (use on VMS servers) \|
		+	\| ''==S3CredentialsEnv=='' \| [[ui_login#read_credentials\|Credentials from AWS environment]] \| ''0''/''off'' = Disabled, ''1''/''on'' = Enabled \|
		+	\| ''Tunnel'' \| [[tunneling\|Connection tunneling]] \| ''0''/''off'' = Disabled, ''1''/''on'' = Enabled \|
	\| ''TunnelHostName'' \| Tunnel host name \| \|		\| ''TunnelHostName'' \| Tunnel host name \| \|
	\| ''TunnelPortNumber'' \| Tunnel port number \| \|		\| ''TunnelPortNumber'' \| Tunnel port number \| \|
	\| ''TunnelUserName'' \| Tunnel user name \| \|		\| ''TunnelUserName'' \| Tunnel user name \| \|
	\| ''TunnelPasswordPlain'' \| Tunnel password \| \|		\| ''TunnelPasswordPlain'' \| Tunnel password \| \|
-	\| ''TunnelHostKey'' \| Fingerprint of expected SSH tunnel host key \| \|	+	\| ''==TunnelHostKey=='' \| Fingerprint of expected SSH tunnel host key \| \|
	\| ''TunnelPublicKeyFile'' \| Path to tunnel private key file \| \|		\| ''TunnelPublicKeyFile'' \| Path to tunnel private key file \| \|
-	\| ''Utf'' \| [[ui_login_environment#utf\|UTF-8 Encoding for Filenames]] \| ''0'' = Off, ''1'' = On, ''2'' = Auto \|	+	\| ''==TunnelLocalPortNumber=='' \| [[ui_login_tunnel#tunnel_options\|Local tunnel port]] \| ''0'' = Autodetect \|
		+	\| ''==Utf=='' \| [[ui_login_environment#utf\|UTF-8 Encoding for Filenames]] \| ''0'' = Off, ''1'' = On, ''2'' = Auto \|
	\| ''Shell'' \| [[ui_login_scp#shell\|Shell]] ([[scp\|SCP protocol]]) \| \|		\| ''Shell'' \| [[ui_login_scp#shell\|Shell]] ([[scp\|SCP protocol]]) \| \|
-	\| ''LookupUserGroups2'' \| [[ui_login_scp#other_options\|Lookup user groups]] \| ''0'' = On, ''1'' = Off, ''2'' = Auto \|	+	\| ''==ListingCommand=='' \| [[ui_login_scp#directory_listing\|Listing command]] \| \|
-	\| ''LocalDirectory'' \| [[ui_login_directories\|Local Directory]]((Note that //Remote Directory// can be set using [[session_url\|session URL]], you do not need to use raw site settings for it.)) \| \|	+	\| ''LookupUserGroups2'' \| [[ui_login_scp#other_options\|Lookup user groups]] \| ''0''/''on'' = On, ''1''/''off'' = Off, ''2''/''auto'' = Auto \|
		+	\| ''==LocalDirectory=='' \| [[ui_login_directories\|Local Directory]]((Note that //Remote Directory// can be set using [[session_url\|session URL]], you do not need to use raw site settings for it.)) \| \|
		+	\| ''==TimeDifference=='' \| [[ui_login_environment#timezone\|Time zone offset]] \| Hexadecimal representation of 64-bit IEEE 754 floating point number (double), representing the offset in days. \\ Example: ''555555555555A5BF'' = -1 hour((In C# you can calculate -1 hour offset using: ''%%string.Join("", BitConverter.GetBytes(TimeSpan.FromHours(-1).TotalDays).Select(b => b.ToString("X2")))%%''.)) \|
	\| ''ConsiderDST'' \| [[ui_login_environment#dst\|Daylight Saving Time]] \| ''0'' = Adjust remote timestamp with DST, ''1'' = Adjust remote timestamp to local conventions, ''2'' = Preserve remote timestamp \|		\| ''ConsiderDST'' \| [[ui_login_environment#dst\|Daylight Saving Time]] \| ''0'' = Adjust remote timestamp with DST, ''1'' = Adjust remote timestamp to local conventions, ''2'' = Preserve remote timestamp \|
-	\| ''FollowDirectorySymlinks'' \| [[ui_login_directories#directory_reading_options\|Follow symbolic links to directories]] \| ''0'' = Disabled, ''1'' = Enabled \|	+	\| ''ResolveSymlinks'' \| [[ui_login_directories#directory_reading_options\|Resolve symbolic links]] \| ''0''/''off'' = Disabled, ''1''/''on'' = Enabled \|
-	\| ''SftpServer'' \| Path to [[ui_login_sftp\|SFTP server binary]] \| For example ''sudo su -c /bin/sftp-server'' \|	+	\| ''FollowDirectorySymlinks'' \| [[ui_login_directories#directory_reading_options\|Follow symbolic links to directories]] \| ''0''/''off'' = Disabled, ''1''/''on'' = Enabled \|
-	\| ''SFTPMaxVersion'' \| [[ui_login_sftp\|Preferred SFTP protocol version]] \| ''0''-''5'' = SFTP version number \|	+	\| ''==ExitCode1IsError=='' \| Consider exit code 1 from [[remote_command\|remote commands]] as an error. \| ''0''/''off'' = Disabled, ''1''/''on'' = Enabled \|
		+	\| ''==SftpServer=='' \| Path to [[ui_login_sftp\|SFTP server binary]] \| For example ''sudo su -c /bin/sftp-server'' \|
		+	\| ''SFTPMaxVersion'' \| [[ui_login_sftp\|Preferred SFTP protocol version]] \| ''0''–''5'' = SFTP version number \|
		+	\| ''==SFTPRealPath=='' \| Canonicalize SFTP paths \| ''0''/''on'' = On, ''1''/''off'' = Off, ''2''/''auto'' = Auto \|
	\| ''MinTlsVersion'' \| [[ui_login_tls\|Minimum TLS/SSL version]] \| ''3'' = SSL 3.0, ''10'' = TLS 1.0, ''11'' = TLS 1.1, ''12'' = TLS 1.2 \|		\| ''MinTlsVersion'' \| [[ui_login_tls\|Minimum TLS/SSL version]] \| ''3'' = SSL 3.0, ''10'' = TLS 1.0, ''11'' = TLS 1.1, ''12'' = TLS 1.2 \|
	\| ''MaxTlsVersion'' \| [[ui_login_tls\|Maximum TLS/SSL version]] \| See ''MinTlsVersion'' \|		\| ''MaxTlsVersion'' \| [[ui_login_tls\|Maximum TLS/SSL version]] \| See ''MinTlsVersion'' \|
-	\| ''SendBuf'' \| [[ui_login_connection#connection\|Optimize connection buffer size]] \| ''0'' = Off, Any positive value = On, value indicates size of the buffer, with recommended value of ''262144'' \\ The ''SshSimple'' may need to be set to ''1'' to disable some of the optimizations, that unchecking the GUI option disables. \|	+	\| ''==SendBuf=='' \| [[ui_login_connection#connection\|Optimize connection buffer size]] \| ''0'' = Off, Any positive value = On, value indicates size of the buffer, with recommended value of ''262144'' \\ The ''SshSimple'' may need to be set to ''0'' to disable some of the optimizations, that unchecking the GUI option disables. \|
-	\| ''EOLType'' \| [[ui_login_environment\|End-of-line characters]] \| ''0'' = LF, ''1'' = CRLF \|	+	\| ''==EOLType=='' \| [[ui_login_environment\|End-of-line characters]] \| ''0'' = LF, ''1'' = CRLF \|
-	\| ''PostLoginCommands'' \| [[ui_login_ftp\|FTP Post login commands]] \| If you need to execute multiple commands, separate them by new-line (line-feed, hexadecimal UTF-8 code ''0A''). I.e. in scripting use ''%0A'' (''-rawsettings PostLoginCommands=CMD1%0ACMD2''), in C# use ''\n'', in PowerShell use ''%%`n%%'' \|	+	\| ''==TrimVMSVersions=='' \| [[ui_login_environment\|Trim VMS Version Numbers]] \| ''0''/''off'' = Off, ''1''/''on'' = On \|
		+	\| ''==PostLoginCommands=='' \| [[ui_login_ftp\|FTP Post login commands]] \| If you need to execute multiple commands, separate them by new-line (line-feed, hexadecimal UTF-8 code ''0A''). I.e. in scripting use ''%0A'' (''-rawsettings PostLoginCommands=CMD1%0ACMD2''), in C# use ''\n'', in PowerShell use ''%%`n%%'' \|
		+	\| ''==InternalEditorEncoding=='' \| Override of default internal editor encoding \| ''-1'' = use [[ui_pref_editor_internal#display\|global preferences]], ''0'' = ANSI encoding, ''65001'' = UTF-8 encoding. \|
		+	\| ''==DeleteToRecycleBin=='' \| [[ui_login_recycle_bin\|Preserve deleted remote files to recycle bin]] \| ''0''/''off'' = Off, ''1''/''on'' = On \|
		+	\| ''OverwrittenToRecycleBin'' \| [[ui_login_recycle_bin\|Preserve overwritten remote files to recycle bin]] \| ''0''/''off'' = Off, ''1''/''on'' = On \|
		+	\| ''RecycleBinPath'' \| [[ui_login_recycle_bin\|Remote recycle bin]] \| \|
		+	\| ''==ProtocolFeatures=='' \| Protocol features override \| Comma-separated list of features override. If the list starts with ''*'', it completely overrides protocol features. If not, individual listed features should start with ''-'' or ''+'', to remove or add the feature. For SFTP protocol, it overrides SFTP extensions list. For FTP protocol, it overrides features declared by ''FEAT'' command response. \|

-	===== Other Settings =====	+	===== [[example]] Example =====
-		+
-	To find correct syntax for settings not listed above, configure the setting in the GUI, store it into a [[session_configuration#site\|site]], [[config\|save configuration to an INI file]] and use the same syntax as you find an INI file.	+
-		+
-	===== Example =====	+
	For example to enable HTTP proxy, in [[scripting]]:		For example to enable HTTP proxy, in [[scripting]]:

	Line 72:		Line 97:
	$sessionOptions.AddRawSettings("ProxyHost", "proxy")		$sessionOptions.AddRawSettings("ProxyHost", "proxy")
	</code>		</code>
		+
		+	===== [[keywords]] Keywords =====
		+
		+	For boolean settings that have values ''0'' for //Off/Disabled// and ''1'' for //On/Enabled// (like [[#authgssapi\|''AuthGSSAPI'']]), you can use ''off'' and ''on'' keywords instead.
		+
		+	For settings that have values ''0'' for //On//, ''1'' for //Off// and ''2'' for //Auto// (like [[#ftpusemlsd\|''FtpUseMlsd'']]), you can use ''on''/''off''/''auto'' keywords instead.

Differences

Documentation

Support

Associations

Follow Us