Invalid access to memory - _ssh_send_port_open

Advertisement

Goto page

1, 2, 3, 4, 5, Next

avelate63@...
Guest

Invalid access to memory - _ssh_send_port_open

inputted command in console and popped up..

WinSCP 5.7

Error message:
Invalid access to memory.

Stack trace:
[017F2B22] _ssh_send_port_open
[019E05DE] C4725_0
[019E2646] ____ExceptionHandler
[019DF5C0] __ExceptionHandler
[7755054E] ntdll.dll.ZwWow64CallFunction64
[77550CCA] ntdll.dll.KiUserExceptionDispatcher
[017F2C73] _get_ssh_exitcode
[018A703F] TSecureShell::EventSelectLoop
[018A64DB] TSecureShell::WaitForData
[018A3BAA] TSecureShell::Receive
[018A3E28] TSecureShell::ReceiveLine
[01884F0D] TSCPFileSystem::ReadCommandOutput
[01885444] TSCPFileSystem::ExecCommand
[018854F3] TSCPFileSystem::ExecCommand
[01888C40] TSCPFileSystem::AnyCommand
[019185F0] TTerminal::DoAnyCommand
[01918337] TTerminal::AnyCommand
[0193972B] TConsoleDialog::DoExecuteCommand
[01939837] TConsoleDialog::ExecuteCommand
[01939543] TConsoleDialog::ExecuteButtonClick
[0141C755] Vcl::Controls::TWinControl::WndProc

[019E0C49] C4725_0
[019E2223] _ReThrowException
[019186A9] TTerminal::DoAnyCommand
[01918337] TTerminal::AnyCommand
[0193972B] TConsoleDialog::DoExecuteCommand
[01939837] TConsoleDialog::ExecuteCommand
[01939543] TConsoleDialog::ExecuteButtonClick
[0141C755] Vcl::Controls::TWinControl::WndProc

Reply with quote

Advertisement

martin
Site Admin
martin avatar
Joined:
Posts:
31,598
Location:
Prague, Czechia

Re: Invalid access to memory

Thanks for your report.
I have sent you an email with a debug version of WinSCP to address you have used to register on this forum.
_________________
Martin Prikryl

Reply with quote

mihailozoricpc@...
Guest

Error changing directory to '..'

<Try to describe precise steps that lead to the problem (where do you click, what keys do you press, what do you see, etc.)>
<If relevant, consider attaching a session log file or a screenshot)>

WinSCP 5.7.1

Error message:
Error changing directory to '..'.

Invalid access to memory.

Stack trace:
[01813452] _ssh_send_port_open
[01A01962] C4799_0
[01A039CA] ____ExceptionHandler
[01A00944] __ExceptionHandler
[77188786] ntdll.dll
[7714010A] ntdll.dll.KiUserExceptionDispatcher
[018135A3] _get_ssh_exitcode
[018C6CB6] TSecureShell::CheckConnection
[018C5627] TSecureShell::SendLine
[018A548D] TSCPFileSystem::SendCommand
[018A5EA0] TSCPFileSystem::ExecCommand
[018A5F8F] TSCPFileSystem::ExecCommand
[018A732E] TSCPFileSystem::ChangeDirectory
[01938BF6] TTerminal::ChangeDirectory
[0183474F] TUnixDirView::ChangeDirectory
[01832C12] TUnixDirView::ExecuteParentDirectory
[015FA060] Customdirview::TCustomDirView::Execute
[0143C7E5] Vcl::Controls::TWinControl::WndProc
[01480713] Vcl::Comctrls::TCustomListView::WndProc
[01560708] System::Classes::_18201
[75176235] USER32.dll
[751768E5] USER32.dll
[75180AAB] USER32.dll
[75180AD1] USER32.dll.CallWindowProcW
[0161F2DF] Dragdrop::TDragDrop::WndMethod
[01560708] System::Classes::_18201
[75176235] USER32.dll
[751768E5] USER32.dll
[75177D2C] USER32.dll
[75177DF5] USER32.dll.DispatchMessageW

Reply with quote

martin
Site Admin
martin avatar
Joined:
Posts:
31,598
Location:
Prague, Czechia

Re: Error changing directory to '..'

Thanks for your report.
I have sent you an email with a debug version of WinSCP to address you have used to register on this forum.

Reply with quote

bhagat_dineshbe2006@...
Guest

Error changing directory to '/opt/oodee/apache-tomcat-7.0.33/webapps'

I connected to server and connection was idle for approximate 30mins, when I tried to use winscp then default pop up like connecting again wait for some seconds, but it was keep on failing in retry, so I wanted to close this start new winscp connection so click on abort, and following error I got;

WinSCP 5.7.1

Error message:
Error changing directory to '/opt/abc/'.

Invalid access to memory.

Stack trace:
[018B3452] _ssh_send_port_open
[01AA1962] C4799_0
[01AA39CA] ____ExceptionHandler
[01AA0944] __ExceptionHandler
[7711B466] ntdll.dll
[770D012E] ntdll.dll.KiUserExceptionDispatcher
[018B35A3] _get_ssh_exitcode
[01966CB6] TSecureShell::CheckConnection
[0196558A] TSecureShell::Send
[01994965] TSFTPFileSystem::SendPacket
[019982AD] TSFTPFileSystem::SendPacketAndReceiveResponse
[01998814] TSFTPFileSystem::RealPath
[01998F3E] TSFTPFileSystem::RealPath
[019A7249] TSFTPFileSystem::ChangeDirectory
[019D8BF6] TTerminal::ChangeDirectory
[019CEB3A] TTerminal::SetCurrentDirectoryW
[018D4092] TUnixDirView::SetPath
[012FFE3B] TScpCommanderForm::DoOpenBookmark
[012FFEFF] TScpCommanderForm::OpenBookmark
[012D5261] TCustomScpExplorerForm::KeyDown

[01AA1962] C4799_0
[01AA39CA] ____ExceptionHandler
[01AA0944] __ExceptionHandler
[7711B466] ntdll.dll
[770D012E] ntdll.dll.KiUserExceptionDispatcher
[01998F3E] TSFTPFileSystem::RealPath
[019A7249] TSFTPFileSystem::ChangeDirectory
[019D8BF6] TTerminal::ChangeDirectory
[019CEB3A] TTerminal::SetCurrentDirectoryW
[018D4092] TUnixDirView::SetPath
[012FFE3B] TScpCommanderForm::DoOpenBookmark
[012FFEFF] TScpCommanderForm::OpenBookmark
[012D5261] TCustomScpExplorerForm::KeyDown

Reply with quote

Advertisement

martin
Site Admin
martin avatar
Joined:
Posts:
31,598
Location:
Prague, Czechia

Re: Error changing directory to '/opt/oodee/apache-tomcat-7.0.33/webapps'

Thanks for your report.
I have sent you an email with a debug version of WinSCP to address you have used to register on this forum.
_________________
Martin Prikryl

Reply with quote

robert.ostrowicki@...
Guest

Error changing directory to '..'

After couple of hours of working the issue appears. Trying to quit and restart application - no effect. Sometmes operation ends with success but mostly error appears. I knwo - hard to trace but really annoying.
It happens after upgrade from previous version of WinSCP (I upgrade regularly as new versions comes up). I re-install previous version but doesn't help so I back to the newest one and have to live with this :/ ).
Greetz!

WinSCP 5.7.1

Error message:
Error changing directory to '..'.

Invalid access to memory.

Stack trace:
[008E3452] _ssh_send_port_open
[00AD1962] C4799_0
[00AD39CA] ____ExceptionHandler
[00AD0944] __ExceptionHandler
[77A0B466] ntdll.dll
[779C012E] ntdll.dll.KiUserExceptionDispatcher
[008E35A3] _get_ssh_exitcode
[00996CB6] TSecureShell::CheckConnection
[00995627] TSecureShell::SendLine
[0097548D] TSCPFileSystem::SendCommand
[00975EA0] TSCPFileSystem::ExecCommand
[00975F8F] TSCPFileSystem::ExecCommand
[0097732E] TSCPFileSystem::ChangeDirectory
[00A08BF6] TTerminal::ChangeDirectory
[0090474F] TUnixDirView::ChangeDirectory
[00902C12] TUnixDirView::ExecuteParentDirectory
[006CA060] Customdirview::TCustomDirView::Execute
[0050C7E5] Vcl::Controls::TWinControl::WndProc
[00550713] Vcl::Comctrls::TCustomListView::WndProc
[00630708] System::Classes::_18201
[772862F7] USER32.dll
[77286D35] USER32.dll
[77290D22] USER32.dll
[77290D48] USER32.dll.CallWindowProcW
[006EF2DF] Dragdrop::TDragDrop::WndMethod
[00630708] System::Classes::_18201
[772862F7] USER32.dll
[77286D35] USER32.dll
[772877BF] USER32.dll
[77287885] USER32.dll.DispatchMessageW

Reply with quote

martin
Site Admin
martin avatar
Joined:
Posts:
31,598
Location:
Prague, Czechia

Re: Error changing directory to '..'

robert.ostrowicki@gmail.com wrote:

After couple of hours of working the issue appears. Trying to quit and restart application - no effect. Sometmes operation ends with success but mostly error appears. I knwo - hard to trace but really annoying.
It happens after upgrade from previous version of WinSCP (I upgrade regularly as new versions comes up). I re-install previous version but doesn't help so I back to the newest one and have to live with this :/ ).
Thanks for your report.

Does it happen with 5.7.2?

I have sent you an email with a debug version of WinSCP to address you have used to register on this forum.

Reply with quote

s.a_7@...
Guest

Ошибка доступа к памяти

<Try to describe precise steps that lead to the problem (where do you click, what keys do you press, what do you see, etc.)>
<If relevant, consider attaching a session log file or a screenshot)>

WinSCP 5.7.2

Error message:
Ошибка доступа к памяти.

Трассировка стека:
(005F2642) _ssh_send_port_open
(007E0E6E) C4799_3
(007E2ED6) ____ExceptionHandler
(007DFE50) __ExceptionHandler
(0005A466) ntdll.dll
(0000F12E) ntdll.dll.KiUserExceptionDispatcher
(005F2793) _get_ssh_exitcode
(006A6D37) TSecureShell::EventSelectLoop
(006A61D3) TSecureShell::WaitForData
(006A38A2) TSecureShell::Receive
(006A3B20) TSecureShell::ReceiveLine
(00684C09) TSCPFileSystem::ReadCommandOutput
(00685140) TSCPFileSystem::ExecCommand
(006851EF) TSCPFileSystem::ExecCommand
(0068893C) TSCPFileSystem::AnyCommand
(007189A0) TTerminal::DoAnyCommand
(007186E7) TTerminal::AnyCommand
(00739D7F) TConsoleDialog::DoExecuteCommand
(00739E8B) TConsoleDialog::ExecuteCommand
(00739B97) TConsoleDialog::ExecuteButtonClick
(0021B9C9) Vcl::Controls::TWinControl::WndProc

(007E14D9) C4799_3
(007E2AB3) _ReThrowException
(00718A59) TTerminal::DoAnyCommand
(007186E7) TTerminal::AnyCommand
(00739D7F) TConsoleDialog::DoExecuteCommand
(00739E8B) TConsoleDialog::ExecuteCommand
(00739B97) TConsoleDialog::ExecuteButtonClick
(0021B9C9) Vcl::Controls::TWinControl::WndProc

Reply with quote

Advertisement

martin
Site Admin
martin avatar
Joined:
Posts:
31,598
Location:
Prague, Czechia

Re: Ошибка доступа к памяти

Thanks for your report.
I have sent you an email with a debug version of WinSCP to address you have used to register on this forum.

Reply with quote

contact.watappo@...
Guest

メモリのアクセス違反(EXCEPTION ACCESS VIOLATION)

<Try to describe precise steps that lead to the problem (where do you click, what keys do you press, what do you see, etc.)>
Try to use SSH shell.
<If relevant, consider attaching a session log file or a screenshot)>

WinSCP 5.7.2

Error message:
メモリのアクセス違反

スタック トレース:
(005F2642) _ssh_send_port_open
(007E0E6E) C4799_3
(007E2ED6) ____ExceptionHandler
(007DFE50) __ExceptionHandler
(0003F07E) ntdll.dll.ZwWow64CallFunction64
(0003F7FA) ntdll.dll.KiUserExceptionDispatcher
(005F2793) _get_ssh_exitcode
(006A6D37) TSecureShell::EventSelectLoop
(006A61D3) TSecureShell::WaitForData
(006A38A2) TSecureShell::Receive
(006A3B20) TSecureShell::ReceiveLine
(00684C09) TSCPFileSystem::ReadCommandOutput
(00685140) TSCPFileSystem::ExecCommand
(006851EF) TSCPFileSystem::ExecCommand
(0068893C) TSCPFileSystem::AnyCommand
(007189A0) TTerminal::DoAnyCommand
(007186E7) TTerminal::AnyCommand
(00739D7F) TConsoleDialog::DoExecuteCommand
(00739E8B) TConsoleDialog::ExecuteCommand
(00739B97) TConsoleDialog::ExecuteButtonClick
(0021B9C9) Vcl::Controls::TWinControl::WndProc

(007E14D9) C4799_3
(007E2AB3) _ReThrowException
(00718A59) TTerminal::DoAnyCommand
(007186E7) TTerminal::AnyCommand
(00739D7F) TConsoleDialog::DoExecuteCommand
(00739E8B) TConsoleDialog::ExecuteCommand
(00739B97) TConsoleDialog::ExecuteButtonClick
(0021B9C9) Vcl::Controls::TWinControl::WndProc

Reply with quote

martin
Site Admin
martin avatar
Joined:
Posts:
31,598
Location:
Prague, Czechia

Re: メモリのアクセス違反(EXCEPTION ACCESS VIOLATION)

Thanks for your report.
I have sent you an email with a debug version of WinSCP to address you have used to register on this forum.

Reply with quote

miroslav.milic@...
Guest

Error changing directory to '..' - _ssh_send_port_open

<Try to describe precise steps that lead to the problem (where do you click, what keys do you press, what do you see, etc.)>
<If relevant, consider attaching a session log file or a screenshot)>

WinSCP 5.7.2

Error message:
Error changing directory to '..'.

Invalid access to memory.

Stack trace:
(005F2642) _ssh_send_port_open
(007E0E6E) C4799_3
(007E2ED6) ____ExceptionHandler
(007DFE50) __ExceptionHandler
(0005A466) ntdll.dll
(0000F12E) ntdll.dll.KiUserExceptionDispatcher
(005F2793) _get_ssh_exitcode
(006A5F16) TSecureShell::CheckConnection
(006A47EA) TSecureShell::Send
(006D3C51) TSFTPFileSystem::SendPacket
(006D7599) TSFTPFileSystem::SendPacketAndReceiveResponse
(006D7BD2) TSFTPFileSystem::RealPath
(006D830A) TSFTPFileSystem::RealPath
(006E6615) TSFTPFileSystem::ChangeDirectory
(0071802E) TTerminal::ChangeDirectory
(0061396B) TUnixDirView::ChangeDirectory
(00611E2E) TUnixDirView::ExecuteParentDirectory

(007E14D9) C4799_3
(007E2AB3) _ReThrowException
(006D80A5) TSFTPFileSystem::RealPath
(006D830A) TSFTPFileSystem::RealPath
(006E6615) TSFTPFileSystem::ChangeDirectory
(0071802E) TTerminal::ChangeDirectory
(0061396B) TUnixDirView::ChangeDirectory
(00611E2E) TUnixDirView::ExecuteParentDirectory

Reply with quote

Advertisement

martin
Site Admin
martin avatar
Joined:
Posts:
31,598
Location:
Prague, Czechia

Re: Error changing directory to '..' - _ssh_send_port_open

Thanks for your report.
I have sent you an email with a debug version of WinSCP to address you have used to register on this forum.

Reply with quote

pethani.a@...
Guest

Invalid access to memory - _ssh_send_port_open

<Try to describe precise steps that lead to the problem (where do you click, what keys do you press, what do you see, etc.)>
<If relevant, consider attaching a session log file or a screenshot)>

WinSCP 5.7.3

Error message:
Invalid access to memory.

Stack trace:
(005F2CB2) _ssh_send_port_open
(007E1CA2) C4799_3
(007E3D0A) ____ExceptionHandler
(007E0C84) __ExceptionHandler
(0003F07E) ntdll.dll.ZwWow64CallFunction64
(0003F7FA) ntdll.dll.KiUserExceptionDispatcher
(005F2E03) _get_ssh_exitcode
(006A77CF) TSecureShell::EventSelectLoop
(006A6C6B) TSecureShell::WaitForData
(006A4362) TSecureShell::Receive
(006A45E0) TSecureShell::ReceiveLine
(00685645) TSCPFileSystem::ReadCommandOutput
(00685B7C) TSCPFileSystem::ExecCommand
(00685C2B) TSCPFileSystem::ExecCommand
(00689378) TSCPFileSystem::AnyCommand
(0071956C) TTerminal::DoAnyCommand
(007192B3) TTerminal::AnyCommand
(0073AB4F) TConsoleDialog::DoExecuteCommand
(0073AC5B) TConsoleDialog::ExecuteCommand
(0073A967) TConsoleDialog::ExecuteButtonClick
(0021BEF5) Vcl::Controls::TWinControl::WndProc

(007E230D) C4799_3
(007E38E7) _ReThrowException
(00719625) TTerminal::DoAnyCommand
(007192B3) TTerminal::AnyCommand
(0073AB4F) TConsoleDialog::DoExecuteCommand
(0073AC5B) TConsoleDialog::ExecuteCommand
(0073A967) TConsoleDialog::ExecuteButtonClick
(0021BEF5) Vcl::Controls::TWinControl::WndProc

Reply with quote

martin
Site Admin
martin avatar
Joined:
Posts:
31,598
Location:
Prague, Czechia

Re: Invalid access to memory - _ssh_send_port_open

Thanks for your report.
I have sent you an email with a debug version of WinSCP to address you have used to register on this forum.

Reply with quote

dfontana1@...
Guest

Invalid access to memory - _ssh_send_port_open

<Try to describe precise steps that lead to the problem (where do you click, what keys do you press, what do you see, etc.)>
<If relevant, consider attaching a session log file or a screenshot)>

WinSCP 5.7.3

Error message:
Invalid access to memory.

Stack trace:
(005F2CB2) _ssh_send_port_open
(007E1CA2) C4799_3
(007E3D0A) ____ExceptionHandler
(007E0C84) __ExceptionHandler
(00064C16) ntdll.dll.RtlRaiseStatus
(00064AA2) ntdll.dll.KiUserExceptionDispatcher
(005F2E03) _get_ssh_exitcode
(006A77CF) TSecureShell::EventSelectLoop
(006A6C6B) TSecureShell::WaitForData
(006A4362) TSecureShell::Receive
(006A45E0) TSecureShell::ReceiveLine
(00685645) TSCPFileSystem::ReadCommandOutput
(00685B7C) TSCPFileSystem::ExecCommand
(00685C2B) TSCPFileSystem::ExecCommand
(00689378) TSCPFileSystem::AnyCommand
(0071956C) TTerminal::DoAnyCommand
(007192B3) TTerminal::AnyCommand
(0073AB4F) TConsoleDialog::DoExecuteCommand
(0073AC5B) TConsoleDialog::ExecuteCommand
(0073A967) TConsoleDialog::ExecuteButtonClick
(0021BEF5) Vcl::Controls::TWinControl::WndProc

(007E230D) C4799_3
(007E38E7) _ReThrowException
(00719625) TTerminal::DoAnyCommand
(007192B3) TTerminal::AnyCommand
(0073AB4F) TConsoleDialog::DoExecuteCommand
(0073AC5B) TConsoleDialog::ExecuteCommand
(0073A967) TConsoleDialog::ExecuteButtonClick
(0021BEF5) Vcl::Controls::TWinControl::WndProc

Reply with quote

Advertisement

martin
Site Admin
martin avatar
Joined:
Posts:
31,598
Location:
Prague, Czechia

Re: Invalid access to memory - _ssh_send_port_open

Thanks for your report.
I have sent you an email with a debug version of WinSCP to address you have used to register on this forum.

Reply with quote

latkolicsebastian@...
Guest

Cannot open remote file '/usr/home/juppsy/LOG_COMPILARE_GAME.txt' - _ssh_send_port_open

<Try to describe precise steps that lead to the problem (where do you click, what keys do you press, what do you see, etc.)>
<If relevant, consider attaching a session log file or a screenshot)>

WinSCP 5.7.4

Error message:
Cannot open remote file '/usr/home/juppsy/LOG_COMPILARE_GAME.txt'.

Invalid access to memory.

Stack trace:
(005F36B2) _ssh_send_port_open
(007E344A) C4799_3
(007E54B2) ____ExceptionHandler
(007E242C) __ExceptionHandler
(000461C6) ntdll.dll.RtlRaiseStatus
(00046052) ntdll.dll.KiUserExceptionDispatcher
(005F3803) _get_ssh_exitcode
(006A754E) TSecureShell::CheckConnection
(006A5C53) TSecureShell::Send
(006D53A5) TSFTPFileSystem::SendPacket
(006D8CED) TSFTPFileSystem::SendPacketAndReceiveResponse
(006FCF8E) TSFTPFileSystem::SFTPOpenRemoteFile
(007008CA) TSFTPFileSystem::SFTPSink
(006FEF3E) TSFTPFileSystem::SFTPSinkRobust
(006FED32) TSFTPFileSystem::CopyToLocal
(007229C9) TTerminal::CopyToLocal
(0000F991) TCustomScpExplorerForm::TemporarilyDownloadFiles
(00010596) TCustomScpExplorerForm::ExecuteFile
(00010B76) TCustomScpExplorerForm::ExecuteFile
(00016111) TCustomScpExplorerForm::DoDirViewExecFile
(00015FE6) TCustomScpExplorerForm::DirViewExecFile
(003D98D8) Customdirview::TCustomDirView::Execute
(0021C069) Vcl::Controls::TWinControl::WndProc
(0025FF97) Vcl::Comctrls::TCustomListView::WndProc
(0033FF8C) System::Classes::_18201
(0001B4E4) USER32.dll
(0001B5E2) USER32.dll
(00010B2C) USER32.dll
(00010B52) USER32.dll.CallWindowProcW
(003FEBB3) Dragdrop::TDragDrop::WndMethod
(0033FF8C) System::Classes::_18201
(0001B4E4) USER32.dll
(0001B5E2) USER32.dll
(0001BC14) USER32.dll
(0001BC6B) USER32.dll.DispatchMessageW

Reply with quote

martin
Site Admin
martin avatar
Joined:
Posts:
31,598
Location:
Prague, Czechia

Re: Cannot open remote file '/usr/home/juppsy/LOG_COMPILARE_GAME.txt' - _ssh_send_port_open

Thanks for your report.
I have sent you an email with a debug version of WinSCP to address you have used to register on this forum.

Reply with quote

Advertisement

lili@...
Guest

无效的内存访问。 - _ssh_send_port_open

<Try to describe precise steps that lead to the problem (where do you click, what keys do you press, what do you see, etc.)>
<If relevant, consider attaching a session log file or a screenshot)>

WinSCP 5.7.4

Error message:
无效的内存访问。

Stack trace:
(005F36B2) _ssh_send_port_open
(007E344A) C4799_3
(007E54B2) ____ExceptionHandler
(007E242C) __ExceptionHandler
(0005A466) ntdll.dll
(0000F12E) ntdll.dll.KiUserExceptionDispatcher
(005F3803) _get_ssh_exitcode
(006A836F) TSecureShell::EventSelectLoop
(006A780B) TSecureShell::WaitForData
(006A4F02) TSecureShell::Receive
(006A5180) TSecureShell::ReceiveLine
(006861E5) TSCPFileSystem::ReadCommandOutput
(0068671C) TSCPFileSystem::ExecCommand
(006867CB) TSCPFileSystem::ExecCommand
(00689F18) TSCPFileSystem::AnyCommand
(0071A210) TTerminal::DoAnyCommand
(00719F57) TTerminal::AnyCommand
(0073B757) TConsoleDialog::DoExecuteCommand
(0073B863) TConsoleDialog::ExecuteCommand
(0073B56F) TConsoleDialog::ExecuteButtonClick
(0021C069) Vcl::Controls::TWinControl::WndProc

(007E3AB5) C4799_3
(007E508F) _ReThrowException
(0071A2C9) TTerminal::DoAnyCommand
(00719F57) TTerminal::AnyCommand
(0073B757) TConsoleDialog::DoExecuteCommand
(0073B863) TConsoleDialog::ExecuteCommand
(0073B56F) TConsoleDialog::ExecuteButtonClick
(0021C069) Vcl::Controls::TWinControl::WndProc

Reply with quote

martin
Site Admin
martin avatar
Joined:
Posts:
31,598
Location:
Prague, Czechia

Re: 无效的内存访问。 - _ssh_send_port_open

Thanks for your report.
I have sent you an email with a debug version of WinSCP to address you have used to register on this forum.

Reply with quote

tapio.vaisanen@...
Guest

Ei voitu vaihtaa kansioon '..' - _ssh_send_port_open

<Try to describe precise steps that lead to the problem (where do you click, what keys do you press, what do you see, etc.)>
<If relevant, consider attaching a session log file or a screenshot)>

WinSCP 5.7.4

Error message:
Ei voitu vaihtaa kansioon '..'.

Virheellinen muistiviittaus.

Pinon j�ljitys:
#005F36B2# _ssh_send_port_open
#007E344A# C4799_3
#007E54B2# ____ExceptionHandler
#007E242C# __ExceptionHandler
#0003F07E# ntdll.dll.ZwWow64CallFunction64
#0003F7FA# ntdll.dll.KiUserExceptionDispatcher
#005F3803# _get_ssh_exitcode
#006A754E# TSecureShell::CheckConnection
#006A5EBF# TSecureShell::SendLine
#00685CC9# TSCPFileSystem::SendCommand
#006866DC# TSCPFileSystem::ExecCommand
#006867CB# TSCPFileSystem::ExecCommand
#00687B6A# TSCPFileSystem::ChangeDirectory
#0071989E# TTerminal::ChangeDirectory
#00614A47# TUnixDirView::ChangeDirectory
#00612F0A# TUnixDirView::ExecuteParentDirectory
#00032BD3# TNonVisualDataModule::ExplorerActionsExecute
#00382054# System::Actions::TContainedActionList::ExecuteAction
#00169BB5# Vcl::Actnlist::TCustomAction::Execute
#0033FF8C# System::Classes::_18201
#00007E6F# USER32.DLL.CallNextHookEx
#000080CC# USER32.DLL
#0000966A# USER32.DLL
#000096DB# USER32.DLL.DispatchMessageW

Reply with quote

mhasnain@...
Guest

Error changing directory to '..' - _ssh_send_port_open

<Try to describe precise steps that lead to the problem (where do you click, what keys do you press, what do you see, etc.)>
<If relevant, consider attaching a session log file or a screenshot)>

WinSCP 5.7.1

Error message:
Error changing directory to '..'.

Invalid access to memory.

Stack trace:
[01683452] _ssh_send_port_open
[01871962] C4799_0
[018739CA] ____ExceptionHandler
[01870944] __ExceptionHandler
[77C233AA] ntdll.dll
[77BD012E] ntdll.dll.KiUserExceptionDispatcher
[016835A3] _get_ssh_exitcode
[01736CB6] TSecureShell::CheckConnection
[01735627] TSecureShell::SendLine
[0171548D] TSCPFileSystem::SendCommand
[01715EA0] TSCPFileSystem::ExecCommand
[01715F8F] TSCPFileSystem::ExecCommand
[0171732E] TSCPFileSystem::ChangeDirectory
[017A8BF6] TTerminal::ChangeDirectory
[016A474F] TUnixDirView::ChangeDirectory
[016A2C12] TUnixDirView::ExecuteParentDirectory
[0146A060] Customdirview::TCustomDirView::Execute
[012AC7E5] Vcl::Controls::TWinControl::WndProc
[012F0713] Vcl::Comctrls::TCustomListView::WndProc
[013D0708] System::Classes::_18201
[761E62F7] USER32.dll
[761E6D35] USER32.dll
[761F0D22] USER32.dll
[761F0D48] USER32.dll.CallWindowProcW
[0148F2DF] Dragdrop::TDragDrop::WndMethod
[013D0708] System::Classes::_18201
[761E62F7] USER32.dll
[761E6D35] USER32.dll
[761E77BF] USER32.dll
[761E7885] USER32.dll.DispatchMessageW

Reply with quote

Advertisement

martin
Site Admin
martin avatar
Joined:
Posts:
31,598
Location:
Prague, Czechia

Re: Ei voitu vaihtaa kansioon '..' - _ssh_send_port_open

Thanks for your report.
I have sent you an email with a debug version of WinSCP to address you have used to register on this forum.

Reply with quote

rafcio0584@...
Guest

Błąd podczas przejścia do katalogu '..' - _ssh_send_port_open

<Try to describe precise steps that lead to the problem (where do you click, what keys do you press, what do you see, etc.)>
<If relevant, consider attaching a session log file or a screenshot)>

WinSCP 5.7.5

Error message:
Błąd podczas przejścia do katalogu '..'.

Naruszenie ochrony pamęci.

Stack trace:
(005F3A9A) _ssh_send_port_open
(007E39EA) C4799_0
(007E5A52) ____ExceptionHandler
(007E29CC) __ExceptionHandler
(000623AA) ntdll.dll
(0000F12E) ntdll.dll.KiUserExceptionDispatcher
(005F3BEB) _get_ssh_exitcode
(006A7936) TSecureShell::CheckConnection
(006A603B) TSecureShell::Send
(006D58A1) TSFTPFileSystem::SendPacket
(006D91E9) TSFTPFileSystem::SendPacketAndReceiveResponse
(006D9822) TSFTPFileSystem::RealPath
(006D9F5A) TSFTPFileSystem::RealPath
(006E8265) TSFTPFileSystem::ChangeDirectory
(00719DB2) TTerminal::ChangeDirectory
(00614E2F) TUnixDirView::ChangeDirectory
(006132F2) TUnixDirView::ExecuteParentDirectory

(007E4055) C4799_0
(007E562F) _ReThrowException
(006D9CF5) TSFTPFileSystem::RealPath
(006D9F5A) TSFTPFileSystem::RealPath
(006E8265) TSFTPFileSystem::ChangeDirectory
(00719DB2) TTerminal::ChangeDirectory
(00614E2F) TUnixDirView::ChangeDirectory
(006132F2) TUnixDirView::ExecuteParentDirectory

The problem happens rarely. I cannot reproduce it.

Reply with quote

halimits@...
Guest

Invalid access to memory - _ssh_send_port_open

<Try to describe precise steps that lead to the problem (where do you click, what keys do you press, what do you see, etc.)>
<If relevant, consider attaching a session log file or a screenshot)>

WinSCP 5.7.3

Error message:
Invalid access to memory.

Stack trace:
(005F2CB2) _ssh_send_port_open
(007E1CA2) C4799_3
(007E3D0A) ____ExceptionHandler
(007E0C84) __ExceptionHandler
(0007C61F) ntdll.dll
(00069E6A) ntdll.dll.KiUserExceptionDispatcher
(005F2E03) _get_ssh_exitcode
(006A77CF) TSecureShell::EventSelectLoop
(006A6C6B) TSecureShell::WaitForData
(006A4362) TSecureShell::Receive
(006A45E0) TSecureShell::ReceiveLine
(00685645) TSCPFileSystem::ReadCommandOutput
(00685B7C) TSCPFileSystem::ExecCommand
(00685C2B) TSCPFileSystem::ExecCommand
(00689378) TSCPFileSystem::AnyCommand
(0071956C) TTerminal::DoAnyCommand
(007192B3) TTerminal::AnyCommand
(0073AB4F) TConsoleDialog::DoExecuteCommand
(0073AC5B) TConsoleDialog::ExecuteCommand
(0073A967) TConsoleDialog::ExecuteButtonClick
(0021BEF5) Vcl::Controls::TWinControl::WndProc

(007E230D) C4799_3
(007E38E7) _ReThrowException
(00719625) TTerminal::DoAnyCommand
(007192B3) TTerminal::AnyCommand
(0073AB4F) TConsoleDialog::DoExecuteCommand
(0073AC5B) TConsoleDialog::ExecuteCommand
(0073A967) TConsoleDialog::ExecuteButtonClick
(0021BEF5) Vcl::Controls::TWinControl::WndProc

The problem happens rarely. I cannot reproduce it.

Reply with quote

zbrueckner@...
Guest

Error changing directory to '..' - _ssh_send_port_open

<Try to describe precise steps that lead to the problem (where do you click, what keys do you press, what do you see, etc.)>
<If relevant, consider attaching a session log file or a screenshot)>

WinSCP 5.7.1

Error message:
Error changing directory to '..'.

Invalid access to memory.

Stack trace:
[01983452] _ssh_send_port_open
[01B71962] C4799_0
[01B739CA] ____ExceptionHandler
[01B70944] __ExceptionHandler
[771733AA] ntdll.dll
[7712012E] ntdll.dll.KiUserExceptionDispatcher
[019835A3] _get_ssh_exitcode
[01A36CB6] TSecureShell::CheckConnection
[01A35627] TSecureShell::SendLine
[01A1548D] TSCPFileSystem::SendCommand
[01A15EA0] TSCPFileSystem::ExecCommand
[01A15F8F] TSCPFileSystem::ExecCommand
[01A1732E] TSCPFileSystem::ChangeDirectory
[01AA8BF6] TTerminal::ChangeDirectory
[019A474F] TUnixDirView::ChangeDirectory
[019A2C12] TUnixDirView::ExecuteParentDirectory
[0176A060] Customdirview::TCustomDirView::Execute
[015AC7E5] Vcl::Controls::TWinControl::WndProc
[015F0713] Vcl::Comctrls::TCustomListView::WndProc
[016D0708] System::Classes::_18201
[76C262F7] USER32.dll
[76C26D35] USER32.dll
[76C30D22] USER32.dll
[76C30D48] USER32.dll.CallWindowProcW
[0178F2DF] Dragdrop::TDragDrop::WndMethod
[016D0708] System::Classes::_18201
[76C262F7] USER32.dll
[76C26D35] USER32.dll
[76C277BF] USER32.dll
[76C27885] USER32.dll.DispatchMessageW

The problem happens rarely. I cannot reproduce it.

Reply with quote

Advertisement

tmanolatos@...
Guest

Error changing directory to '/root/ebeascanning-migration' - _ssh_send_port_open

<Try to describe precise steps that lead to the problem (where do you click, what keys do you press, what do you see, etc.)>
<If relevant, consider attaching a session log file or a screenshot)>

WinSCP 5.8.1

Error message:
Error changing directory to '/root/ebeascanning-migration'.

Invalid access to memory.

Stack trace:
(00608582) _ssh_send_port_open
(008300A2) C5066_0
(0083210A) ____ExceptionHandler
(0082F084) __ExceptionHandler
(0008A52F) ntdll.dll
(00077DAA) ntdll.dll.KiUserExceptionDispatcher
(006086EB) _get_ssh_exitcode
(006CEC2A) TSecureShell::CheckConnection
(006CD323) TSecureShell::Send
(0070C671) TSFTPFileSystem::SendPacket
(0071062D) TSFTPFileSystem::SendPacketAndReceiveResponse
(00710C66) TSFTPFileSystem::RealPath
(0071139E) TSFTPFileSystem::RealPath
(0071F5F9) TSFTPFileSystem::ChangeDirectory
(007513CE) TTerminal::ChangeDirectory
(00636BB2) TCustomUnixDriveView::Change
(002652EA) Vcl::Comctrls::TCustomTreeView::CNNotify
(003EBE45) Customdriveview::TCustomDriveView::CNNotify
(0022E601) Vcl::Controls::TWinControl::WndProc
(002655A6) Vcl::Comctrls::TCustomTreeView::WndProc
(0022E767) Vcl::Controls::_17076
(0022E601) Vcl::Controls::TWinControl::WndProc
(0022DC48) Vcl::Controls::TWinControl::MainWndProc
(0035257C) System::Classes::_18201
(000374F1) USER32.dll
(00015C3B) USER32.dll
(0001581B) USER32.dll
(0001C167) USER32.dll
(00077D84) ntdll.dll.KiUserCallbackDispatcher
(00014EDE) USER32.dll.SendMessageW
(0007DBD8) COMCTL32.dll
(00034F23) COMCTL32.dll
(00034D8A) COMCTL32.dll
(00066AD2) COMCTL32.dll
(00039351) COMCTL32.dll
(000374F1) USER32.dll
(00015C3B) USER32.dll
(000159D2) USER32.dll.CallWindowProcW
%

The problem happens rarely. I cannot reproduce it.

Reply with quote

pio@...
Guest

Не удалось перейти в домашнюю папку - _ssh_send_port_open

<Try to describe precise steps that lead to the problem (where do you click, what keys do you press, what do you see, etc.)>
<If relevant, consider attaching a session log file or a screenshot)>

WinSCP 5.8.1

Error message:
Не удалось перейти в домашнюю папку.

Ошибка доступа к памяти.

Трассировка стека:
(00608582) _ssh_send_port_open
(008300A2) C5066_0
(0083210A) ____ExceptionHandler
(0082F084) __ExceptionHandler
(0008A52F) ntdll.dll
(00077DAA) ntdll.dll.KiUserExceptionDispatcher
(006086EB) _get_ssh_exitcode
(006CEC2A) TSecureShell::CheckConnection
(006CD323) TSecureShell::Send
(0070C671) TSFTPFileSystem::SendPacket
(0071062D) TSFTPFileSystem::SendPacketAndReceiveResponse
(00710C66) TSFTPFileSystem::RealPath
(00711C11) TSFTPFileSystem::GetHomeDirectory
(0071EAAE) TSFTPFileSystem::HomeDirectory
(0075107F) TTerminal::HomeDirectory
(006336D7) TUnixDirView::ChangeDirectory
(00631D74) TUnixDirView::ExecuteHomeDirectory
(00013519) TCustomScpExplorerForm::HomeDirectory
(00043514) TScpCommanderForm::HomeDirectory
(00034A68) TNonVisualDataModule::ExplorerActionsExecute
(00394634) System::Actions::TContainedActionList::ExecuteAction
(0017B859) Vcl::Actnlist::TCustomAction::Execute
(0035257C) System::Classes::_18201
(000374F1) USER32.dll
(00015C3B) USER32.dll
(0001553C) USER32.dll
(000152FB) USER32.dll.DispatchMessageW

(0083070D) C5066_0
(00831CE7) _ReThrowException
(00711139) TSFTPFileSystem::RealPath
(00711C11%2

The problem happens rarely. I cannot reproduce it.

Reply with quote

leandrosampaiosilva@...
Guest

Cannot open remote file '/perf_01/coleta/ext_table/coleta_hpov/coleta_manual/nohup.out' - _ssh_send_port_open

<Try to describe precise steps that lead to the problem (where do you click, what keys do you press, what do you see, etc.)>
<If relevant, consider attaching a session log file or a screenshot)>

WinSCP 5.8

Error message:
Cannot open remote file '/perf_01/coleta/ext_table/coleta_hpov/coleta_manual/nohup.out'.

Invalid access to memory.

Stack trace:
(0060A74E) _ssh_send_port_open
(0081A832) C5058_0
(0081C89A) ____ExceptionHandler
(00819814) __ExceptionHandler
(0008A52F) ntdll.dll
(00077DAA) ntdll.dll.KiUserExceptionDispatcher
(0060A8B7) _get_ssh_exitcode
(006C7DD2) TSecureShell::CheckConnection
(006C64CB) TSecureShell::Send
(006FAF79) TSFTPFileSystem::SendPacket
(006FEF35) TSFTPFileSystem::SendPacketAndReceiveResponse
(0072323E) TSFTPFileSystem::SFTPOpenRemoteFile
(00727139) TSFTPFileSystem::SFTPSink
(0072536A) TSFTPFileSystem::SFTPSinkRobust
(0072515E) TSFTPFileSystem::CopyToLocal
(007496ED) TTerminal::CopyToLocal
(0000FD35) TCustomScpExplorerForm::TemporarilyDownloadFiles
(00010959) TCustomScpExplorerForm::ExecuteFile
(00010F3E) TCustomScpExplorerForm::ExecuteFile
(000167A1) TCustomScpExplorerForm::DoDirViewExecFile
(00016676) TCustomScpExplorerForm::DirViewExecFile
(003E8CA8) Customdirview::TCustomDirView::Execute
(003E640E) Customdirview::TCustomDirView::DoExecute
(003E68F9) Customdirview::TCustomDirView::KeyDown

The problem happens rarely. I cannot reproduce it.

Reply with quote

james.baldwin@...
Guest

Invalid access to memory - _ssh_send_port_open

<Try to describe precise steps that lead to the problem (where do you click, what keys do you press, what do you see, etc.)>
<If relevant, consider attaching a session log file or a screenshot)>

WinSCP 5.8

Error message:
Invalid access to memory.

Stack trace:
(0060A74E) _ssh_send_port_open
(0081A832) C5058_0
(0081C89A) ____ExceptionHandler
(00819814) __ExceptionHandler
(0005A466) ntdll.dll
(0000F12E) ntdll.dll.KiUserExceptionDispatcher
(0060A8B7) _get_ssh_exitcode
(006C8913) TSecureShell::HandleNetworkEvents
(006C8A9E) TSecureShell::ProcessNetworkEvents
(006C808F) TSecureShell::WaitForData
(006C3499) TSecureShell::Init
(006C2D71) TSecureShell::Open
(006F9397) TSFTPFileSystem::Open
(007338B3) TTerminal::Reopen
(00693269) TTerminalThread::TerminalReopenEvent
(0068E230) TSignalThread::Execute
(000919C3) Userinterface::C20_0
(00012388) kernel32.dll.BaseThreadInitThunk
(00038F70) ntdll.dll
(00038F40) ntdll.dll

(0081AE9D) C5058_0
(0081C477) _ReThrowException
(006C35A7) TSecureShell::Init
(006C2D71) TSecureShell::Open
(006F9397) TSFTPFileSystem::Open
(007338B3) TTerminal::Reopen
(00693269) TTerminalThread::TerminalReopenEvent
(0068E230) TSignalThread::Execute
(000919C3) Userinterface::C20_0
(00012388) kernel32.dll.BaseThreadInitThunk
(00038F70) ntdll.dll
(00038F40) ntdll.dll
Authentication failed.

The problem happens rarely. I cannot reproduce it.

Reply with quote

Advertisement

sorryidontwantreplies@...
Guest

Cannot open remote file '/home/pi/Start_x11vnc_server_localhost.sh' - _ssh_send_port_open

<Try to describe precise steps that lead to the problem (where do you click, what keys do you press, what do you see, etc.)>
<If relevant, consider attaching a session log file or a screenshot)>

WinSCP 5.8.1

Error message:
Cannot open remote file '/home/pi/Start_x11vnc_server_localhost.sh'.

Invalid access to memory.

Stack trace:
(00608582) _ssh_send_port_open
(008300A2) C5066_0
(0083210A) ____ExceptionHandler
(0082F084) __ExceptionHandler
(0008A63F) ntdll.dll
(00077E9A) ntdll.dll.KiUserExceptionDispatcher
(006086EB) _get_ssh_exitcode
(006CEC2A) TSecureShell::CheckConnection
(006CD323) TSecureShell::Send
(0070C671) TSFTPFileSystem::SendPacket
(0071062D) TSFTPFileSystem::SendPacketAndReceiveResponse
(00734936) TSFTPFileSystem::SFTPOpenRemoteFile
(00738831) TSFTPFileSystem::SFTPSink
(00736A62) TSFTPFileSystem::SFTPSinkRobust
(00736856) TSFTPFileSystem::CopyToLocal
(0075ADE5) TTerminal::CopyToLocal
(0000FD35) TCustomScpExplorerForm::TemporarilyDownloadFiles
(00012EAF) TCustomScpExplorerForm::RemoteTransferFiles
(0000CF02) TCustomScpExplorerForm::ExecuteFileOperation
(0000D0F4) TCustomScpExplorerForm::ExecuteFileOperation
(0000D17B) TCustomScpExplorerForm::ExecuteFileOperationCommand
(00033FA0) TNonVisualDataModule::ExplorerActionsExecute
(00394634) System::Actions::TContainedActionList::ExecuteAction
(0017B859) Vcl::Actnlist::TCustomAction::Execute
(0035257C) System::Classes::_18201
(000374F1) USER32.dll
(00015C3B) USER32.dll
(0001553C) USER32.dll
(000152FB) USER32.dll.DispatchMessageW

The problem happens rarely. I cannot reproduce it.

Reply with quote

qvarck@...
Guest

Не могу сменить каталог на '/var/www/nelomal.ru/public/links' - _ssh_send_port_open

<Try to describe precise steps that lead to the problem (where do you click, what keys do you press, what do you see, etc.)>
<If relevant, consider attaching a session log file or a screenshot)>

WinSCP 5.8.2

Error message:
Не могу сменить каталог на '/var/www/nelomal.ru/public/links'.

Ошибка доступа к памяти.

Трассировка стека:
(00611416) _ssh_send_port_open
(0084095E) C5073_3
(008429C6) ____ExceptionHandler
(0083F940) __ExceptionHandler
(0005A5DA) ntdll.dll
(0000F12E) ntdll.dll.KiUserExceptionDispatcher
(0061157F) _get_ssh_exitcode
(006E0E0A) TSecureShell::CheckConnection
(006DF503) TSecureShell::Send
(0071B12D) TSFTPFileSystem::SendPacket
(0071F0E9) TSFTPFileSystem::SendPacketAndReceiveResponse
(0071F722) TSFTPFileSystem::RealPath
(0071FE5A) TSFTPFileSystem::RealPath
(0072E0B5) TSFTPFileSystem::ChangeDirectory
(007600BA) TTerminal::ChangeDirectory
(0063FA16) TCustomUnixDriveView::Change
(0026D722) Vcl::Comctrls::TCustomTreeView::CNNotify
(003F4285) Customdriveview::TCustomDriveView::CNNotify
(00236A39) Vcl::Controls::TWinControl::WndProc
(0026D9DE) Vcl::Comctrls::TCustomTreeView::WndProc
(00236B9F) Vcl::Controls::_17076
(00236A39) Vcl::Controls::TWinControl::WndProc
(00236080) Vcl::Controls::TWinControl::MainWndProc
(0035A970) System::Classes::_18201
(000152F7) USER32.dll
(00015D35) USER32.dll
(00015DE3) USER32.dll
(00015E41) USER32.dll
(0000F107) ntdll.dll.KiUserCallbackDispatcher
(000186C0) USER32.dll.Sen

I know how to reproduce the problem or the problem happens frequently enough. I wish to be contacted by the WinSCP team to help resolving the problem.

Reply with quote

martin
Site Admin
martin avatar
Joined:
Posts:
31,598
Location:
Prague, Czechia

Re: Не могу сменить каталог на '/var/www/nelomal.ru/public/links' - _ssh_send_port_open

Thanks for your report.
I have sent you an email with a debug version of WinSCP to the address you have used to register on this forum.

Reply with quote

nooooord@...
Guest

Не могу сменить каталог на '/home/n/nooooov3/energo.1dea.ru/public_html/sites/all/themes/cannon/css' - _ssh_send_port_open

<Try to describe precise steps that lead to the problem (where do you click, what keys do you press, what do you see, etc.)>
<If relevant, consider attaching a session log file or a screenshot)>

WinSCP 5.8.2

Error message:
Не могу сменить каталог на '/home/n/nooooov3/energo.1dea.ru/public_html/sites/all/themes/cannon/css'.

Ошибка доступа к памяти.

Трассировка стека:
(00611416) _ssh_send_port_open
(0084095E) C5073_3
(008429C6) ____ExceptionHandler
(0083F940) __ExceptionHandler
(0005A466) ntdll.dll
(0000F12E) ntdll.dll.KiUserExceptionDispatcher
(0061157F) _get_ssh_exitcode
(006E0E0A) TSecureShell::CheckConnection
(006DF503) TSecureShell::Send
(0071B12D) TSFTPFileSystem::SendPacket
(0071F0E9) TSFTPFileSystem::SendPacketAndReceiveResponse
(0071F722) TSFTPFileSystem::RealPath
(0071FE5A) TSFTPFileSystem::RealPath
(0072E0B5) TSFTPFileSystem::ChangeDirectory
(007600BA) TTerminal::ChangeDirectory
(0063FA16) TCustomUnixDriveView::Change
(0026D722) Vcl::Comctrls::TCustomTreeView::CNNotify
(003F4285) Customdriveview::TCustomDriveView::CNNotify
(00236A39) Vcl::Controls::TWinControl::WndProc
(0026D9DE) Vcl::Comctrls::TCustomTreeView::WndProc
(00236B9F) Vcl::Controls::_17076
(00236A39) Vcl::Controls::TWinControl::WndProc
(00236080) Vcl::Controls::TWinControl::MainWndProc
(0035A970) System::Classes::_18201
(000152F7) USER32.dll
(00015D35) USER32.dll
(00015DE3) USER32.dll
(00015E41) USER32.dll
(0000F107) ntdll.dll.KiUserCallba

The problem happens rarely. I cannot reproduce it.

Reply with quote

Advertisement

ks.99app@...
Guest

Error skipping startup message. Your shell is probably incompatible with the application (BASH is recommended) - _ssh_send_port_open

<Try to describe precise steps that lead to the problem (where do you click, what keys do you press, what do you see, etc.)>
<If relevant, consider attaching a session log file or a screenshot)>

WinSCP 5.8.2

Error message:
Error skipping startup message. Your shell is probably incompatible with the application (BASH is recommended).

Invalid access to memory.

Stack trace:
(00611416) _ssh_send_port_open
(0084095E) C5073_3
(008429C6) ____ExceptionHandler
(0083F940) __ExceptionHandler
(0005A7EA) ntdll.dll
(0000F15E) ntdll.dll.KiUserExceptionDispatcher
(0061157F) _get_ssh_exitcode
(006E0E0A) TSecureShell::CheckConnection
(006DED38) TSecureShell::SendSpecial
(006DED7D) TSecureShell::SendEOF
(00719553) TSFTPFileSystem::Close
(006E0C1F) TSecureShell::Discard
(00631C83) _sk_newlistener
(006036E6) C2447_0
(00603916) _ssh_connshare_log
(00603F70) _ssh_connshare_log
(0060B460) _ssh_agent_forwarding_permitted
(0060B5C4) _ssh_sharing_logf
(0060B62F) _ssh_sharing_logf
(0060B7E6) _ssh_sharing_logf
(006102BB) _sshfwd_x11_is_local
(006034D2) C2447_0
(00603685) C2447_0
(006039BC) _ssh_connshare_log
(00632115) _select_result
(006E1813) TSecureShell::HandleNetworkEvents
(006E1AD6) TSecureShell::ProcessNetworkEvents
(006E10C7) TSecureShell::WaitForData
(006DE7B2) TSecureShell::Receive
(006DEA30) TSecureShell::ReceiveLine
(006BEA49) TSCPFileSystem::ReadCommandOutput
(006BEF80) TSCPFileSystem::ExecCommand
(006BF02F) TSCPFileSystem::ExecCommand
(006BF540) TSCPFileSystem::SkipStartupMessage
(006BF221) TSCPFileSystem::DoStartup
(007590EE) TTerminal::DoStartup
(0075281A) TTerminal::Open
(006AC35F) TTerminalThread::TerminalOpenEvent
(006A7334) TSignalThread::E

I know how to reproduce the problem or the problem happens frequently enough. I wish to be contacted by the WinSCP team to help resolving the problem.

Reply with quote

martin
Site Admin
martin avatar
Joined:
Posts:
31,598
Location:
Prague, Czechia

Re: Error skipping startup message. Your shell is probably incompatible with the application (BASH is recommended) - _ssh_send_port_open

Thanks for your report.
I have sent you an email with a debug version of WinSCP to the address you have used to register on this forum.

Reply with quote

hiper171@...
Guest

Error changing directory to 'old2' - _ssh_send_port_open

<Try to describe precise steps that lead to the problem (where do you click, what keys do you press, what do you see, etc.)>
<If relevant, consider attaching a session log file or a screenshot)>

WinSCP 5.8.2

Error message:
Error changing directory to 'old2'.

Invalid access to memory.

Stack trace:
(00611416) _ssh_send_port_open
(0084095E) C5073_3
(008429C6) ____ExceptionHandler
(0083F940) __ExceptionHandler
(0008A61F) ntdll.dll
(00077E7A) ntdll.dll.KiUserExceptionDispatcher
(0061157F) _get_ssh_exitcode
(006E0E0A) TSecureShell::CheckConnection
(006DF503) TSecureShell::Send
(0071B12D) TSFTPFileSystem::SendPacket
(0071F0E9) TSFTPFileSystem::SendPacketAndReceiveResponse
(0071F722) TSFTPFileSystem::RealPath
(0071FE5A) TSFTPFileSystem::RealPath
(0072E0B5) TSFTPFileSystem::ChangeDirectory
(007600BA) TTerminal::ChangeDirectory
(0063C5CF) TUnixDirView::ChangeDirectory
(0063AA06) TUnixDirView::ExecuteFile
(003EDBAA) Customdirview::TCustomDirView::DoExecute
(003EE777) Customdirview::TCustomDirView::WMLButtonDblClk
(00236A39) Vcl::Controls::TWinControl::WndProc
(0027A967) Vcl::Comctrls::TCustomListView::WndProc
(0035A970) System::Classes::_18201
(000374F1) USER32.dll
(00015C3B) USER32.dll
(000159D2) USER32.dll.CallWindowProcW
(00098CBA) COMCTL32.DLL
(00098CA1) COMCTL32.DLL
(00098ADC) COMCTL32.DLL
(000374F1) USER32.dll
(00015C3B) USER32.dll
(000159D2) USER32.dll.CallWindowProcW
(004140CB) Dragdrop::TDragDrop::WndMethod
(0035A970) System::Classes::_18201
(000374F1) USER32.dll
(00015C3B) USER32.dll
(0001553C) USER32.dll
(000152FB) USER32.dll.DispatchMessageW

(00840FC9) C5073_3
(008425A3) _ReThrowException
(0071FBF5) TSFTPF

The problem happens rarely. I cannot reproduce it.

Reply with quote

Advertisement

i2000s@...
Guest

Error changing directory to '..' - _ssh_send_port_open

<Try to describe precise steps that lead to the problem (where do you click, what keys do you press, what do you see, etc.)>
<If relevant, consider attaching a session log file or a screenshot)>

WinSCP 5.7.7

Error message:
Error changing directory to '..'.

Invalid access to memory.

Stack trace:
(005F4C5E) _ssh_send_port_open
(007E08AA) C4799_0
(007E2912) ____ExceptionHandler
(007DF88C) __ExceptionHandler
(0008A61F) ntdll.dll
(00077E7A) ntdll.dll.KiUserExceptionDispatcher
(005F4DAF) _get_ssh_exitcode
(006A907A) TSecureShell::CheckConnection
(006A79EB) TSecureShell::SendLine
(00687619) TSCPFileSystem::SendCommand
(0068802C) TSCPFileSystem::ExecCommand
(0068811B) TSCPFileSystem::ExecCommand
(006894BA) TSCPFileSystem::ChangeDirectory
(0071B4EE) TTerminal::ChangeDirectory
(00616007) TUnixDirView::ChangeDirectory
(006144B6) TUnixDirView::ExecuteParentDirectory
(00032BE7) TNonVisualDataModule::ExplorerActionsExecute
(00382614) System::Actions::TContainedActionList::ExecuteAction
(0016A155) Vcl::Actnlist::TCustomAction::Execute
(0034059C) System::Classes::_18201
(000374F1) USER32.dll
(00015C3B) USER32.dll
(0001553C) USER32.dll
(000152FB) USER32.dll.DispatchMessageW

I know how to reproduce the problem or the problem happens frequently enough. I wish to be contacted by the WinSCP team to help resolving the problem.

Reply with quote

martin
Site Admin
martin avatar
Joined:
Posts:
31,598
Location:
Prague, Czechia

Re: Error changing directory to '..' - _ssh_send_port_open

Thanks for your report.
I have sent you an email with a debug version of WinSCP to the address you have used to register on this forum.

Reply with quote

i2000s@...
Guest

Re: Error changing directory to '..' - _ssh_send_port_open

martin wrote:

Thanks for your report.
I have sent you an email with a debug version of WinSCP to the address you have used to register on this forum.

I forgot how to repeat this error on my end... Maybe it is just an accident. Let me know what can I do for this case. Thanks!

Reply with quote

consen@...
Guest

Error changing directory to '/var/www/html/RoR/rblog/app/views' - _ssh_send_port_open

After working perfectly some hours, 3-4, connected to our web hosting server.

WinSCP 5.8.2

Error message:
Error changing directory to '/var/www/html/RoR/rblog/app/views'.

Invalid access to memory.

Stack trace:
(00611416)
(0084095E)
(008429C6)
(0083F940)
(0003EE3E) ntdll.dll.ZwWow64CallFunction64
(0003F5BA) ntdll.dll.KiUserExceptionDispatcher
(0061157F)
(006E0E0A)
(006DF503)
(0071B12D)
(0071F0E9)
(0071F722)
(0071FE5A)
(0072E0B5)
(007600BA)
(0063FA16)
(0026D722)
(003F4285)
(00236A39)
(0026D9DE)
(00236B9F)
(00236A39)
(00236080)
(0035A970)
(00007E6F) USER32.DLL.CallNextHookEx
(000080CC) USER32.DLL
(0000832E) USER32.DLL
(00008527) USER32.DLL
(0003F594) ntdll.dll.KiUserCallbackDispatcher
(00011B34) USER32.DLL.SendMessageW
(0002CBDB) COMCTL32.DLL
(00073A51) COMCTL32.DLL
(00073770) COMCTL32.DLL
(0004CC98) COMCTL32.DLL
(0004CB9E) COMCTL32.DLL
(00007E6F) USER32.DLL.CallNextHookEx
(000080CC) USER32.DLL
(0000C6C0) USER32.DLL.CallWindowProcW
(00236B4A)
(003F42E5)
(0035A970)
(00007E6F) USER32.DLL.CallNextHookEx
(000080CC) USER32.DLL
(0000C6C0) USER32.DLL.CallWindowProcW
(004140CB)
(0035A970)
(00007E6F) USER32.DLL.CallNextHookEx
(000080CC) USER32.DLL
(00009625) USER32.DLL
(0000967B) USER32.DLL.DispatchMessageW

(00840FC9)
(008425A3)
(0071FBF5)
(0071FE5A)
(0072E0B5)
(007600BA)
(0063FA16)
(0026D722)
(003F4285)
(00236A39)
(0026D9DE)

The problem happens rarely. I cannot reproduce it.

Reply with quote

Advertisement

ROCKYS08
Guest

OPEN ( ERROR )

BUENOS DIAS !!!
ESTOY INTERESADO EN WINSCP
CUANDO EJECUTO WINSCP.EXE ... FUNCIONA BIEN !!!
CUANDO EJECUTO WINSCP.COM ... SOLO LA PRIMERA VEZ LOGRE CONECTARME Y ENVIAR UN ARCHIVO
LUEGO ME DA ERROR Y NO ME CONECTA !!!
QUE PUEDE SER ???
GRACIAS

Reply with quote

harry.tx@...
Guest

Błąd podczas przejścia do katalogu '/app/comarch/files/SRC/CSV/WebAnalytics' - _ssh_send_port_open

<Try to describe precise steps that lead to the problem (where do you click, what keys do you press, what do you see, etc.)>
<If relevant, consider attaching a session log file or a screenshot)>

WinSCP 5.8.2

Error message:
Błąd podczas przejścia do katalogu '/app/(cut)/files/SRC/CSV/(cut)'.

Naruszenie ochrony pamęci.

Stack trace:
(00611416) _ssh_send_port_open
(0084095E) C5073_3
(008429C6) ____ExceptionHandler
(0083F940) __ExceptionHandler
(00062496) ntdll.dll
(0000F13E) ntdll.dll.KiUserExceptionDispatcher
(0061157F) _get_ssh_exitcode
(006E0E0A) TSecureShell::CheckConnection
(006DF503) TSecureShell::Send
(0071B12D) TSFTPFileSystem::SendPacket
(0071F0E9) TSFTPFileSystem::SendPacketAndReceiveResponse
(0071F722) TSFTPFileSystem::RealPath
(0071FE5A) TSFTPFileSystem::RealPath
(0072E0B5) TSFTPFileSystem::ChangeDirectory
(007600BA) TTerminal::ChangeDirectory
(0063FA16) TCustomUnixDriveView::Change
(0026D722) Vcl::Comctrls::TCustomTreeView::CNNotify
(003F4285) Customdriveview::TCustomDriveView::CNNotify
(00236A39) Vcl::Controls::TWinControl::WndProc
(0026D9DE) Vcl::Comctrls::TCustomTreeView::WndProc
(00236B9F) Vcl::Controls::_17076
(00236A39) Vcl::Controls::TWinControl::WndProc
(00236080) Vcl::Controls::TWinControl::MainWndProc
(0035A970) System::Classes::_18201
(000152F7) USER32.dll
(00015D35) USER32.dll
(00015DE8) USER32.dll
(00015E49) USER32.dll
(0000F117) ntdll.dll.KiUserCallbackDispatcher
(000186D0) USER32.dll.SendMessageW
(0002B06D) COMCTL32.DLL
(000A846F) COMCTL32.DLL
(000A77FB) COMCTL32.DLL
(0004B30B) COMCTL32.DLL
(0004B226) COMCTL32.DLL
(000152F7) USER32.dll
(00015D35) USER32.dll
(

The problem happens rarely. I cannot reproduce it.

Reply with quote

harry.tx@...
Guest

Nie można utworzyć zdalnego pliku 'somepath/eletrodomestico.csv' - _ssh_send_port_open

<Try to describe precise steps that lead to the problem (where do you click, what keys do you press, what do you see, etc.)>
<If relevant, consider attaching a session log file or a screenshot)>

WinSCP 5.8.2

Error message:
Nie można utworzyć zdalnego pliku 'somepath/2016-01-01-2016-01-01-eletrodomestico.csv'.

Naruszenie ochrony pamęci.

Stack trace:
(00611416) _ssh_send_port_open
(0084095E) C5073_3
(008429C6) ____ExceptionHandler
(0083F940) __ExceptionHandler
(00062496) ntdll.dll
(0000F13E) ntdll.dll.KiUserExceptionDispatcher
(0061157F) _get_ssh_exitcode
(006E0E0A) TSecureShell::CheckConnection
(006DF503) TSecureShell::Send
(0071B12D) TSFTPFileSystem::SendPacket
(0071F0E9) TSFTPFileSystem::SendPacketAndReceiveResponse
(00743412) TSFTPFileSystem::SFTPOpenRemoteFile
(007435C8) TSFTPFileSystem::SFTPOpenRemote
(00755DD9) TTerminal::FileOperationLoop
(0073F2B4) TSFTPFileSystem::SFTPSource
(0073DFD8) TSFTPFileSystem::SFTPSourceRobust
(0073D166) TSFTPFileSystem::CopyToRemote
(00769231) TTerminal::CopyToRemote
(0000CDE9) TCustomScpExplorerForm::ExecuteFileOperation
(0000DAE8) TCustomScpExplorerForm::ExecuteFileOperation
(0000DB6F) TCustomScpExplorerForm::ExecuteFileOperationCommand
(0000DCF6) TCustomScpExplorerForm::ExecuteCopyOperationCommand
(00034627) TNonVisualDataModule::ExplorerActionsExecute
(0039CA78) System::Actions::TContainedActionList::ExecuteAction
(00183C91) Vcl::Actnlist::TCustomAction::Execute

(00840FC9) C5073_3
(008425A3) _ReThrowException
(00743C29) TSFTPFileSystem::SFTPOpenRemote
(00755DD9) TTerminal::FileOperationLoop
(0073F2B4) TSFTPFileSystem::SFTPSource
(0073DFD8) TSFTPFileSystem::SFTPSourceRobust
(0073

The problem happens rarely. I cannot reproduce it.

Reply with quote

jbrown@...
Guest

Error changing directory to '/apps/developers/jbrown/IMSX/phase_code/includes' - _ssh_send_port_open

<Try to describe precise steps that lead to the problem (where do you click, what keys do you press, what do you see, etc.)>

In the left window, I was connected to Linux
In the right window, I was looking at the same folder mapped to Samba as my U: drive
Both trees were displayed
I was moving around using the trees on both panels and the displays were synchronized
It seems like a latency problem, because I saw messages about connection aborted, reconnecting


<If relevant, consider attaching a session log file or a screenshot)>

WinSCP 5.7.7

Error message:
Error changing directory to '/apps/developers/jbrown/IMSX/phase_code/includes'.

Invalid access to memory.

Stack trace:
#005F4C5E# _ssh_send_port_open
#007E08AA# C4799_0
#007E2912# ____ExceptionHandler
#007DF88C# __ExceptionHandler
#00062496# ntdll.dll
#0000F13E# ntdll.dll.KiUserExceptionDispatcher
#005F4DAF# _get_ssh_exitcode
#006A907A# TSecureShell::CheckConnection
#006A777F# TSecureShell::Send
#006D6FDD# TSFTPFileSystem::SendPacket
#006DA925# TSFTPFileSystem::SendPacketAndReceiveResponse
#006DAF5E# TSFTPFileSystem::RealPath
#006DB696# TSFTPFileSystem::RealPath
#006E99A1# TSFTPFileSystem::ChangeDirectory
#0071B4EE# TTerminal::ChangeDirectory
#00619316# TCustomUnixDriveView::Change
#002532F2# Vcl::Comctrls::TCustomTreeView::CNNotify
#003DE479# Customdriveview::TCustomDriveView::CNNotify
#0021C609# Vcl::Controls::TWinControl::WndProc
#002535AE# Vcl::Comctrls::TCustomTreeView::WndProc
#0021C76F# Vcl::Controls::_17076
#0021C609# Vcl::Controls::TWinControl::WndProc
#0021BC50# Vcl::Controls::TWinControl::MainWndProc
#0034059C# System::Classes::_18201
#000152F7# USER32.dll
#00015D35# USER32.dll
#00015DE8# USER32.dll
#00015E49# USER32.dll
#0000F117# ntdll.dll.KiUserCallbackDispatcher
#000186D0# USER32.dll.SendMessageW
#0002B06D# COMCTL32.DLL
#000A846F# COMCTL32.DLL
#000A77FB# COMCTL32.DLL
#0004B30B# COMCTL32.DLL
#0004B226# COMCTL32.DLL
#000152F7# USER32.dll
#00015D35# USER32.d

The problem happens rarely. I cannot reproduce it.

Reply with quote

Advertisement

davidsignchef@...
Guest

Error changing directory to '/var/www/thesignchef/classes' - _ssh_send_port_open

<Try to describe precise steps that lead to the problem (where do you click, what keys do you press, what do you see, etc.)>
<If relevant, consider attaching a session log file or a screenshot)>

Lost internet connection from ISP, duration 15 minutes

WinSCP 5.8.2

Error message:
Error changing directory to '/var/www/thesignchef/classes'.

Invalid access to memory.

Stack trace:
(00611416) _ssh_send_port_open
(0084095E) C5073_3
(008429C6) ____ExceptionHandler
(0083F940) __ExceptionHandler
(0003EE3E) ntdll.dll.ZwWow64CallFunction64
(0003F5BA) ntdll.dll.KiUserExceptionDispatcher
(0061157F) _get_ssh_exitcode
(006E0E0A) TSecureShell::CheckConnection
(006DF503) TSecureShell::Send
(0071B12D) TSFTPFileSystem::SendPacket
(0071F0E9) TSFTPFileSystem::SendPacketAndReceiveResponse
(0071F722) TSFTPFileSystem::RealPath
(0071FE5A) TSFTPFileSystem::RealPath
(0072E0B5) TSFTPFileSystem::ChangeDirectory
(007600BA) TTerminal::ChangeDirectory
(0063FA16) TCustomUnixDriveView::Change
(0026D722) Vcl::Comctrls::TCustomTreeView::CNNotify
(003F4285) Customdriveview::TCustomDriveView::CNNotify
(00236A39) Vcl::Controls::TWinControl::WndProc
(0026D9DE) Vcl::Comctrls::TCustomTreeView::WndProc
(00236B9F) Vcl::Controls::_17076
(00236A39) Vcl::Controls::TWinControl::WndProc
(00236080) Vcl::Controls::TWinControl::MainWndProc
(0035A970) System::Classes::_18201
(00007E6F) USER32.DLL.CallNextHookEx
(000080CC) USER32.DLL
(0000832E) USER32.DLL
(00008527) USER32.DLL
(0003F594) ntdll.dll.KiUserCallbackDispatcher
(00011B34) USER32.DLL.SendMessageW
(0002CBDB) COMCTL32.DLL
(00073A51) COMCTL32.DLL
(00073770) COMCTL32.DLL
(0004CC98) COMCTL32.DLL
(0004CB9E) COMCTL32.DLL
(00007E6F) USER32.DLL.CallNextHookEx
(000080CC) USER32.DLL

I know how to reproduce the problem or the problem happens frequently enough. I wish to be contacted by the WinSCP team to help resolving the problem.

Reply with quote

narayana1043@...
Guest

Error changing directory to 'pickles' - _ssh_send_port_open

<Try to describe precise steps that lead to the problem (where do you click, what keys do you press, what do you see, etc.)>
<If relevant, consider attaching a session log file or a screenshot)>

WinSCP 5.8.3

Error message:
Error changing directory to 'pickles'.

Invalid access to memory.

Stack trace:
(00622526) _ssh_send_port_open
(008594BA) C5073_0
(0085B522) ____ExceptionHandler
(008582DC) __ExceptionHandler
(00062496) ntdll.dll
(0000F13E) ntdll.dll.KiUserExceptionDispatcher
(0062268F) _get_ssh_exitcode
(006F2BDA) TSecureShell::CheckConnection
(006F12D3) TSecureShell::Send
(0072D485) TSFTPFileSystem::SendPacket
(00731441) TSFTPFileSystem::SendPacketAndReceiveResponse
(00731A7A) TSFTPFileSystem::RealPath
(007321B2) TSFTPFileSystem::RealPath
(0074040D) TSFTPFileSystem::ChangeDirectory
(0077272A) TTerminal::ChangeDirectory
(0064D95B) TUnixDirView::ChangeDirectory
(0064BD92) TUnixDirView::ExecuteFile
(003FE352) Customdirview::TCustomDirView::DoExecute
(003FEF1F) Customdirview::TCustomDirView::WMLButtonDblClk
(002471B9) Vcl::Controls::TWinControl::WndProc
(0028B0E7) Vcl::Comctrls::TCustomListView::WndProc
(0036B0F0) System::Classes::_18201
(000152F7) USER32.dll
(00015D35) USER32.dll
(0001FD32) USER32.dll
(0001FD58) USER32.dll.CallWindowProcW
(0042480F) Dragdrop::TDragDrop::WndMethod
(0036B0F0) System::Classes::_18201
(000152F7) USER32.dll
(00015D35) USER32.dll
(000167CE) USER32.dll
(00016895) USER32.dll.DispatchMessageW

(00859B25) C5073_0
(0085B0FF) _ReThrowException
(00731F4D) TSFTPFileSystem::RealPath
(007321B2) TSFTPFileSystem::RealPath
(0074040D) TSFTPFileSystem::ChangeDirectory
(0077272A) TTerminal::ChangeDirect

The problem happens rarely. I cannot reproduce it.

Reply with quote

martin
Site Admin
martin avatar
Joined:
Posts:
31,598
Location:
Prague, Czechia

Re: Error changing directory to '/var/www/thesignchef/classes' - _ssh_send_port_open

davidsignchef@... wrote:

Lost internet connection from ISP, duration 15 minutes

WinSCP 5.8.2

Error message:
Error changing directory to '/var/www/thesignchef/classes'.

Invalid access to memory.

Stack trace:
(00611416) _ssh_send_port_open
...

I know how to reproduce the problem or the problem happens frequently enough. I wish to be contacted by the WinSCP team to help resolving the problem.
Thanks for your report.
I have sent you an email with a debug version of WinSCP to the address you have used to register on this forum.

Reply with quote

truc@...
Guest

Error changing directory to home directory - _ssh_send_port_open

Always Google Drive ... :-(

<Try to describe precise steps that lead to the problem (where do you click, what keys do you press, what do you see, etc.)>
<If relevant, consider attaching a session log file or a screenshot)>

WinSCP 5.8.3

Error message:
Error changing directory to home directory.

Invalid access to memory.

Stack trace:
(00622526)
(008594BA)
(0085B522)
(008582DC)
(0008A61F) ntdll.dll
(00077E7A) ntdll.dll.KiUserExceptionDispatcher
(0062268F)
(006F2BDA)
(006F12D3)
(0072D485)
(00731441)
(00731A7A)
(00732A25)
(0073F8C2)
(007723DB)
(0064D8C7) @TUnixDirView@ChangeDirectory$qqr20System@UnicodeString
(0064BF64) @TUnixDirView@ExecuteHomeDirectory$qqrv
(00014A85)
(0004659A)
(00037B04)
(003AD1F8)
(00194411)
(0036B0F0)
(000374F1) USER32.dll
(00015C3B) USER32.dll
(0001553C) USER32.dll
(000152FB) USER32.dll.DispatchMessageW

(00859B25)
(0085B0FF)
(00731F4D)
(00732A25)
(0073F8C2)
(007723DB)
(0064D8C7) @TUnixDirView@ChangeDirectory$qqr20System@UnicodeString
(0064BF64) @TUnixDirView@ExecuteHomeDirectory$qqrv
(00014A85)
(0004659A)
(00037B04)
(003AD1F8)
(00194411)
(0036B0F0)
(000374F1) USER32.dll
(00015C3B) USER32.dll
(0001553C) USER32.dll
(000152FB) USER32.dll.DispatchMessageW

I know how to reproduce the problem or the problem happens frequently enough. I wish to be contacted by the WinSCP team to help resolving the problem.

Reply with quote

Advertisement

martin
Site Admin
martin avatar
Joined:
Posts:
31,598
Location:
Prague, Czechia

Re: Error changing directory to home directory - _ssh_send_port_open

Thanks for your report.
I have sent you an email with a debug version of WinSCP to the address you have used to register on this forum.

Reply with quote

meet_zdes@...
Guest

Не могу получить имя каталога на сервере - _ssh_send_port_open

<Try to describe precise steps that lead to the problem (where do you click, what keys do you press, what do you see, etc.)>
<If relevant, consider attaching a session log file or a screenshot)>

WinSCP 5.7.7

Error message:
Не могу получить имя каталога на сервере.

Ошибка доступа к памяти.

Трассировка стека:
(005F4C5E) _ssh_send_port_open
(007E08AA) C4799_0
(007E2912) ____ExceptionHandler
(007DF88C) __ExceptionHandler
(0008112F) ntdll.dll
(0006ECCA) ntdll.dll.KiUserExceptionDispatcher
(005F4DAF) _get_ssh_exitcode
(006A907A) TSecureShell::CheckConnection
(006A777F) TSecureShell::Send
(006D6FDD) TSFTPFileSystem::SendPacket
(006DA925) TSFTPFileSystem::SendPacketAndReceiveResponse
(006DAF5E) TSFTPFileSystem::RealPath
(006DBF09) TSFTPFileSystem::GetHomeDirectory
(006E8DF5) TSFTPFileSystem::ReadCurrentDirectory
(00714009) TTerminal::ReadCurrentDirectory
(00711486) TTerminal::GetCurrentDirectoryW
(0001E4A0) TCustomScpExplorerForm::PathForCaption
(000402B4) TScpCommanderForm::PathForCaption
(00076E10) TTerminalManager::UpdateAppTitle
(00076784) TTerminalManager::DoSetActiveTerminal
(00076742) TTerminalManager::SetActiveTerminal
(00075CEF) TTerminalManager::FreeActiveTerminal
(00382614) System::Actions::TContainedActionList::ExecuteAction
(0016A155) Vcl::Actnlist::TCustomAction::Execute
(0034059C) System::Classes::_18201
(0002BD31) USER32.dll
(0000DB8A) USER32.dll
(0000D2DF) USER32.dll
(0000D09B) USER32.dll.DispatchMessageW

(007E0F15) C4799_0
(007E24EF) _ReThrowException
(006DB431) TSFTPFileSystem::RealPath
(006DBF09) TSFTPFileSystem::GetHomeDirectory
(006E8DF5) TSFTPFileSystem::ReadCurrentDirectory
(00714009) TTerminal::ReadCurrentDirectory
(00711486) TTer

The problem happens rarely. I cannot reproduce it.

Reply with quote

dtatham@...
Guest

Invalid access to memory - _ssh_send_port_open

<Try to describe precise steps that lead to the problem (where do you click, what keys do you press, what do you see, etc.)>
<If relevant, consider attaching a session log file or a screenshot)>

WinSCP 5.8.4

Error message:
Invalid access to memory.

Stack trace:
(00629432) _ssh_send_port_open
(00861DD6) C5073_3
(00863E3E) ____ExceptionHandler
(00860BF8) __ExceptionHandler
(00062496) ntdll.dll
(0000F13E) ntdll.dll.KiUserExceptionDispatcher
(0062959B) _get_ssh_exitcode
(006FA31A) TSecureShell::CheckConnection
(006F8248) TSecureShell::SendSpecial
(006F828D) TSecureShell::SendEOF
(0073330B) TSFTPFileSystem::Close
(006FA12F) TSecureShell::Discard
(00649EAF) _sk_newlistener
(0061B6B6) C2447_0
(006178D6) C2447_0
(00627A9F) _sshfwd_x11_is_local
(00624969) _sshfwd_x11_is_local
(00623200) _ssh_agent_forwarding_permitted
(0062808F) _sshfwd_x11_is_local
(0061B4A2) C2447_0
(0061B655) C2447_0
(0061B970) _ssh_connshare_log
(0064A341) _select_result
(006FAD23) TSecureShell::HandleNetworkEvents
(006FAFE6) TSecureShell::ProcessNetworkEvents
(006FA5D7) TSecureShell::WaitForData
(006F59E1) TSecureShell::Init
(006F52B6) TSecureShell::Open
(0076C322) TTerminal::Open
(006C5673) TTerminalThread::TerminalOpenEvent
(006C0648) TSignalThread::Execute
(00098247) Userinterface::C20_0
(00012388) kernel32.dll.BaseThreadInitThunk
(00038900) ntdll.dll
(000388D0) ntdll.dll
Authentication log (see session log for details):
Using username "APIIESO00054".

Authentication failed.

I know how to reproduce the problem or the problem happens frequently enough. I wish to be contacted by the WinSCP team to help resolving the problem.

Reply with quote

martin
Site Admin
martin avatar
Joined:
Posts:
31,598
Location:
Prague, Czechia

Re: Invalid access to memory - _ssh_send_port_open

Thanks for your report.
I have sent you an email with a debug version of WinSCP to the address you have used to register on this forum.

Reply with quote

Advertisement

retsetA@...
Guest

Cannot open remote file '/mntdir/proj/escher/A0/workareas/a.mitroshyn/p4/SRK_SQA_ESCHER/sgpu/main/_out/linux-x86/relwithdebinfo/libtinyxml2.a' - _ssh_send_port_open

<Try to describe precise steps that lead to the problem (where do you click, what keys do you press, what do you see, etc.)>
<If relevant, consider attaching a session log file or a screenshot)>

WinSCP 5.9

Error message:
Cannot open remote file '/mntdir/proj/escher/A0/workareas/a.mitroshyn/p4/SRK_SQA_ESCHER/sgpu/main/_out/linux-x86/relwithdebinfo/libtinyxml2.a'.

Invalid access to memory.

Stack trace:
(00629596) _ssh_send_port_open
(0086216E) C5073_3
(008641D6) ____ExceptionHandler
(00860F90) __ExceptionHandler
(0005A7EA) ntdll.dll
(0000F15E) ntdll.dll.KiUserExceptionDispatcher
(006296FF) _get_ssh_exitcode
(006FA4AE) TSecureShell::CheckConnection
(006F8BA7) TSecureShell::Send
(00735111) TSFTPFileSystem::SendPacket
(007390CD) TSFTPFileSystem::SendPacketAndReceiveResponse
(0075D6F2) TSFTPFileSystem::SFTPOpenRemoteFile
(007615F5) TSFTPFileSystem::SFTPSink
(0075F81E) TSFTPFileSystem::SFTPSinkRobust
(0075F612) TSFTPFileSystem::CopyToLocal
(00784069) TTerminal::CopyToLocal
(0000DD8A) TCustomScpExplorerForm::ExecuteFileOperation
(0000E9E4) TCustomScpExplorerForm::ExecuteFileOperation
(0001D6C7) TCustomScpExplorerForm::RemoteFileControlFileOperation
(0001DA24) TCustomScpExplorerForm::RemoteFileControlDDEnd
(0040871A) Customdirview::TCustomDirView::DDDragDetect
(0065476A) TUnixDirView::DDDragDetect
(00404B84) Customdirview::TCustomDirView::CNNotify
(00249BD1) Vcl::Controls::TControl::WndProc
(0024E715) Vcl::Controls::TWinControl::WndProc
(00292643) Vcl::Comctrls::TCustomListView::WndProc
(0024E87B) Vcl::Controls::_17076
(0024E715) Vcl::Controls::TWinControl::WndProc
(0024DD5C) Vcl::Controls::TWinControl::MainWndProc
(0037264C) System::Classes::_18201
(0

The problem happens rarely. I cannot reproduce it.

Reply with quote

dave3991@...
Guest

Chyba při změně aktuálního adresáře na '/var/www/html/devel' - _ssh_send_port_open

<Try to describe precise steps that lead to the problem (where do you click, what keys do you press, what do you see, etc.)>
<If relevant, consider attaching a session log file or a screenshot)>

WinSCP 5.7.7

Error message:
Chyba při změně aktuálního adresáře na '/var/www/html/devel'.

Chyba přístupu do paměti.

Stack trace:
(005F4C5E) _ssh_send_port_open
(007E08AA) C4799_0
(007E2912) ____ExceptionHandler
(007DF88C) __ExceptionHandler
(00062496) ntdll.dll
(0000F13E) ntdll.dll.KiUserExceptionDispatcher
(005F4DAF) _get_ssh_exitcode
(006A907A) TSecureShell::CheckConnection
(006A794E) TSecureShell::Send
(006D6FDD) TSFTPFileSystem::SendPacket
(006ED1C9) TSFTPFileSystem::SendCustomReadFile
(006ED53A) TSFTPFileSystem::CustomReadFile
(006E8FA5) TSFTPFileSystem::TryOpenDirectory
(006E99DD) TSFTPFileSystem::ChangeDirectory
(0071B4EE) TTerminal::ChangeDirectory
(007113FA) TTerminal::SetCurrentDirectoryW
(0061594A) TUnixDirView::SetPath
(0003FFC2) TScpCommanderForm::RemotePathLabelPathClick
(003CCA09) Pathlabel::TCustomPathLabel::DoPathClick
(003CAE46) Pathlabel::TCustomPathLabel::Click
(002184C5) Vcl::Controls::TControl::WMLButtonUp
(00217700) Vcl::Controls::TControl::Perform
(0021BED7) Vcl::Controls::TWinControl::IsControlMouseMsg
(0021BC50) Vcl::Controls::TWinControl::MainWndProc
(0034059C) System::Classes::_18201
(000152F7) USER32.dll
(00015D35) USER32.dll
(000167CE) USER32.dll
(00016895) USER32.dll.DispatchMessageW

The problem happens rarely. I cannot reproduce it.

Reply with quote

cliffv@...
Guest

Error changing directory to 'sqlldr' - _ssh_send_port_open

<Try to describe precise steps that lead to the problem (where do you click, what keys do you press, what do you see, etc.)>
<If relevant, consider attaching a session log file or a screenshot)>

WinSCP 5.9

Error message:
Error changing directory to 'sqlldr'.

Invalid access to memory.

Stack trace:
(00629596) _ssh_send_port_open
(0086216E) C5073_3
(008641D6) ____ExceptionHandler
(00860F90) __ExceptionHandler
(0008A61F) ntdll.dll
(00077E7A) ntdll.dll.KiUserExceptionDispatcher
(006296FF) _get_ssh_exitcode
(006FA4AE) TSecureShell::CheckConnection
(006F8BA7) TSecureShell::Send
(00735111) TSFTPFileSystem::SendPacket
(007390CD) TSFTPFileSystem::SendPacketAndReceiveResponse
(00739706) TSFTPFileSystem::RealPath
(00739E3E) TSFTPFileSystem::RealPath
(00748099) TSFTPFileSystem::ChangeDirectory
(0077A3B6) TTerminal::ChangeDirectory
(006549CB) TUnixDirView::ChangeDirectory
(00652E02) TUnixDirView::ExecuteFile
(004058C2) Customdirview::TCustomDirView::DoExecute
(0040648F) Customdirview::TCustomDirView::WMLButtonDblClk
(0024E715) Vcl::Controls::TWinControl::WndProc
(00292643) Vcl::Comctrls::TCustomListView::WndProc
(0037264C) System::Classes::_18201
(000374F1) USER32.dll
(00015C3B) USER32.dll
(000159D2) USER32.dll.CallWindowProcW
(00098CBA) COMCTL32.DLL
(00098CA1) COMCTL32.DLL
(00098ADC) COMCTL32.DLL
(000374F1) USER32.dll
(00015C3B) USER32.dll
(000159D2) USER32.dll.CallWindowProcW
(0042BD7F) Dragdrop::TDragDrop::WndMethod
(0037264C) System::Classes::_18201
(000374F1) USER32.dll
(00015C3B) USER32.dll
(0001553C) USER32.dll
(000152FB) USER32.dll.DispatchMessageW

(008627D9) C5073_3
(00863DB3) _ReThrowException
(00739BD9) TSFTPF

The problem happens rarely. I cannot reproduce it.

Reply with quote

mpc@...
Guest

Fehler beim Wechseln in Verzeichnis '..' - _ssh_send_port_open

<Try to describe precise steps that lead to the problem (where do you click, what keys do you press, what do you see, etc.)>
<If relevant, consider attaching a session log file or a screenshot)>

WinSCP 5.9

Error message:
Fehler beim Wechseln in Verzeichnis '..'.

Zugriffsverletzung - ungültiger Zugriff auf den Speicher.

Stack trace:
(00629596) _ssh_send_port_open
(0086216E) C5073_3
(008641D6) ____ExceptionHandler
(00860F90) __ExceptionHandler
(0008A61F) ntdll.dll
(00077E7A) ntdll.dll.KiUserExceptionDispatcher
(006296FF) _get_ssh_exitcode
(006FA4AE) TSecureShell::CheckConnection
(006F8BA7) TSecureShell::Send
(00735111) TSFTPFileSystem::SendPacket
(007390CD) TSFTPFileSystem::SendPacketAndReceiveResponse
(00739706) TSFTPFileSystem::RealPath
(00739E3E) TSFTPFileSystem::RealPath
(00748099) TSFTPFileSystem::ChangeDirectory
(0077A3B6) TTerminal::ChangeDirectory
(006549CB) TUnixDirView::ChangeDirectory
(00652E66) TUnixDirView::ExecuteParentDirectory
(00407ECC) Customdirview::TCustomDirView::Execute
(004058C2) Customdirview::TCustomDirView::DoExecute
(0040648F) Customdirview::TCustomDirView::WMLButtonDblClk
(0024E715) Vcl::Controls::TWinControl::WndProc
(00292643) Vcl::Comctrls::TCustomListView::WndProc
(0037264C) System::Classes::_18201
(000374F1) USER32.dll
(00015C3B) USER32.dll
(000159D2) USER32.dll.CallWindowProcW
(00098CBA) COMCTL32.DLL
(00098CA1) COMCTL32.DLL
(00098ADC) COMCTL32.DLL
(000374F1) USER32.dll
(00015C3B) USER32.dll
(000159D2) USER32.dll.CallWindowProcW
(0042BD7F) Dragdrop::TDragDrop::WndMethod
(0037264C) System::Classes::_18201
(000374F1) USER32.dll
(00015C3B) USER32.dll
(0001553C) USER32.dll
(000152FB) USE

I know how to reproduce the problem or the problem happens frequently enough. I wish to be contacted by the WinSCP team to help resolving the problem.

Reply with quote

Advertisement

nhesterr@...
Guest

Error changing directory to '..' - _ssh_send_port_open

This happens sometimes when the session is lost I think, but winscp won't reconnect automatically. The Refresh button is unavailable so I have no way to reconnect. The crash happens when I try to navigate to other directory in remote session.


WinSCP 5.9

Error message:
Error changing directory to '..'.

Invalid access to memory.

Stack trace:
(00629596) _ssh_send_port_open
(0086216E) C5073_3
(008641D6) ____ExceptionHandler
(00860F90) __ExceptionHandler
(0008A61F) ntdll.dll
(00077E7A) ntdll.dll.KiUserExceptionDispatcher
(006296FF) _get_ssh_exitcode
(006FA4AE) TSecureShell::CheckConnection
(006F8BA7) TSecureShell::Send
(00735111) TSFTPFileSystem::SendPacket
(007390CD) TSFTPFileSystem::SendPacketAndReceiveResponse
(00739706) TSFTPFileSystem::RealPath
(00739E3E) TSFTPFileSystem::RealPath
(00748099) TSFTPFileSystem::ChangeDirectory
(0077A3B6) TTerminal::ChangeDirectory
(006549CB) TUnixDirView::ChangeDirectory
(00652E66) TUnixDirView::ExecuteParentDirectory
(00407ECC) Customdirview::TCustomDirView::Execute
(004058C2) Customdirview::TCustomDirView::DoExecute
(0040648F) Customdirview::TCustomDirView::WMLButtonDblClk
(0024E715) Vcl::Controls::TWinControl::WndProc
(00292643) Vcl::Comctrls::TCustomListView::WndProc
(0037264C) System::Classes::_18201
(000374F1) USER32.dll
(00015C3B) USER32.dll
(000159D2) USER32.dll.CallWindowProcW
(00098CBA) COMCTL32.DLL
(00098CA1) COMCTL32.DLL
(00098ADC) COMCTL32.DLL
(000374F1) USER32.dll
(00015C3B) USER32.dll
(000159D2) USER32.dll.CallWindowProcW
(0042BD7F) Dragdrop::TDragDrop::WndMethod
(0037264C) System::Classes::_18201
(000374F1) USER32.dll
(00015C3B) USER32.dll
(0001553C) USER32.dll
(000152FB) USER32.dll.DispatchMessageW

(008627D9)

I know how to reproduce the problem or the problem happens frequently enough. I wish to be contacted by the WinSCP team to help resolving the problem.

Reply with quote

martin
Site Admin
martin avatar
Joined:
Posts:
31,598
Location:
Prague, Czechia

Re: Fehler beim Wechseln in Verzeichnis '..' - _ssh_send_port_open

Thanks for your report.
I have sent you an email with a debug version of WinSCP to the address you have used to register on this forum.

Reply with quote

jpg@...
Guest

Erreur lors du changemenent de répertoire vers 'javascript' - _ssh_send_port_open

<Try to describe precise steps that lead to the problem (where do you click, what keys do you press, what do you see, etc.)>
<If relevant, consider attaching a session log file or a screenshot)>

WinSCP 5.9

Error message:
Erreur lors du changemenent de répertoire vers 'javascript'.

Accès mémoire invalide.

Trace de la pile :
(00629596) _ssh_send_port_open
(0086216E) C5073_3
(008641D6) ____ExceptionHandler
(00860F90) __ExceptionHandler
(0008A61F) ntdll.dll
(00077E7A) ntdll.dll.KiUserExceptionDispatcher
(006296FF) _get_ssh_exitcode
(006FA4AE) TSecureShell::CheckConnection
(006F8BA7) TSecureShell::Send
(00735111) TSFTPFileSystem::SendPacket
(007390CD) TSFTPFileSystem::SendPacketAndReceiveResponse
(00739706) TSFTPFileSystem::RealPath
(00739E3E) TSFTPFileSystem::RealPath
(00748099) TSFTPFileSystem::ChangeDirectory
(0077A3B6) TTerminal::ChangeDirectory
(006549CB) TUnixDirView::ChangeDirectory
(00652E02) TUnixDirView::ExecuteFile
(004058C2) Customdirview::TCustomDirView::DoExecute
(0040648F) Customdirview::TCustomDirView::WMLButtonDblClk
(0024E715) Vcl::Controls::TWinControl::WndProc
(00292643) Vcl::Comctrls::TCustomListView::WndProc
(0037264C) System::Classes::_18201
(000374F1) USER32.dll
(00015C3B) USER32.dll
(000159D2) USER32.dll.CallWindowProcW
(00098CBA) COMCTL32.DLL
(00098CA1) COMCTL32.DLL
(00098ADC) COMCTL32.DLL
(000374F1) USER32.dll
(00015C3B) USER32.dll
(000159D2) USER32.dll.CallWindowProcW
(0042BD7F) Dragdrop::TDragDrop::WndMethod
(0037264C) System::Classes::_18201
(000374F1) USER32.dll
(00015C3B) USER32.dll
(0001553C) USER32.dll
(000152FB) USER32.dll.DispatchMessageW

(008627D9) C5073_3
(00863DB3

The problem happens rarely. I cannot reproduce it.

Reply with quote

koronabora@...
Guest

Не могу сменить каталог на '/etc/openvpn' - _ssh_send_port_open

<Try to describe precise steps that lead to the problem (where do you click, what keys do you press, what do you see, etc.)>
<If relevant, consider attaching a session log file or a screenshot)>

WinSCP 5.9

Error message:
Не могу сменить каталог на '/etc/openvpn'.

Ошибка доступа к памяти.

Трассировка стека:
(00629596) _ssh_send_port_open
(0086216E) C5073_3
(008641D6) ____ExceptionHandler
(00860F90) __ExceptionHandler
(0008A61F) ntdll.dll
(00077E7A) ntdll.dll.KiUserExceptionDispatcher
(006296FF) _get_ssh_exitcode
(006FA4AE) TSecureShell::CheckConnection
(006F8BA7) TSecureShell::Send
(00735111) TSFTPFileSystem::SendPacket
(007390CD) TSFTPFileSystem::SendPacketAndReceiveResponse
(00739706) TSFTPFileSystem::RealPath
(00739E3E) TSFTPFileSystem::RealPath
(00748099) TSFTPFileSystem::ChangeDirectory
(0077A3B6) TTerminal::ChangeDirectory
(0077ADA3) TTerminal::DoAnyCommand
(0077AA97) TTerminal::AnyCommand
(0079EB65) TConsoleDialog::DoExecuteCommand
(0079EC87) TConsoleDialog::ExecuteCommand
(0079E93F) TConsoleDialog::ExecuteButtonClick
(0024E715) Vcl::Controls::TWinControl::WndProc
(001B688C) Vcl::Stdctrls::TButtonControl::WndProc
(0024E87B) Vcl::Controls::_17076
(0024E715) Vcl::Controls::TWinControl::WndProc
(00208BC4) Vcl::Forms::TCustomForm::WndProc
(00807E14) Vclcommon::C2754_0
(0024DD5C) Vcl::Controls::TWinControl::MainWndProc
(0037264C) System::Classes::_18201
(000374F1) USER32.dll
(00015C3B) USER32.dll

The problem happens rarely. I cannot reproduce it.

Reply with quote

Advertisement

registration@...
Guest

Error changing directory to '..' - _ssh_send_port_open

I was clicking on the bar above the file list (where the cursor is in the image) to change the remote directory.

WinSCP 5.9

Error message:
Error changing directory to '..'.

Invalid access to memory.

Stack trace:
(00629596) _ssh_send_port_open
(0086216E) C5073_3
(008641D6) ____ExceptionHandler
(00860F90) __ExceptionHandler
(0008A61F) ntdll.dll
(00077E7A) ntdll.dll.KiUserExceptionDispatcher
(006296FF) _get_ssh_exitcode
(006FA4AE) TSecureShell::CheckConnection
(006F8BA7) TSecureShell::Send
(00735111) TSFTPFileSystem::SendPacket
(007390CD) TSFTPFileSystem::SendPacketAndReceiveResponse
(00739706) TSFTPFileSystem::RealPath
(00739E3E) TSFTPFileSystem::RealPath
(00748099) TSFTPFileSystem::ChangeDirectory
(0077A3B6) TTerminal::ChangeDirectory
(006549CB) TUnixDirView::ChangeDirectory
(00652E66) TUnixDirView::ExecuteParentDirectory
(00407ECC) Customdirview::TCustomDirView::Execute
(004058C2) Customdirview::TCustomDirView::DoExecute
(0040648F) Customdirview::TCustomDirView::WMLButtonDblClk
(0024E715) Vcl::Controls::TWinControl::WndProc
(00292643) Vcl::Comctrls::TCustomListView::WndProc
(0037264C) System::Classes::_18201
(000374F1) USER32.dll
(00015C3B) USER32.dll
(000159D2) USER32.dll.CallWindowProcW
(00098CBA) COMCTL32.DLL
(00098CA1) COMCTL32.DLL
(00098ADC) COMCTL32.DLL
(000374F1) USER32.dll
(00015C3B) USER32.dll
(000159D2) USER32.dll.CallWindowProcW
(0042BD7F) Dragdrop::TDragDrop::WndMethod
(0037264C) System::Classes::_18201
(000374F1) USER32.dll
(00015C3B) USER32.dll
(0001553C) USER32.dll
(000152FB) USER32.dll.DispatchMessageW

(008627D9)

The problem happens rarely. I cannot reproduce it.

Description: Screen shot

Clipboard02.jpg

Reply with quote

oxleymp@...
Guest

Error changing directory to '/global/cscratch1/sd/oxley/LSMO-STO/O42' - _ssh_send_port_open

I currently have two zipped directories downloading to my PC. I had just finished zipping a directory and couldn't refresh and got this error when I tried to change directories.

WinSCP 5.9

Error message:
Error changing directory to '/global/cscratch1/sd/oxley/LSMO-STO/O42'.

Invalid access to memory.

Stack trace:
(00629596) _ssh_send_port_open
(0086216E) C5073_3
(008641D6) ____ExceptionHandler
(00860F90) __ExceptionHandler
(0008A61F) ntdll.dll
(00077E7A) ntdll.dll.KiUserExceptionDispatcher
(006296FF) _get_ssh_exitcode
(006FA4AE) TSecureShell::CheckConnection
(006F8BA7) TSecureShell::Send
(00735111) TSFTPFileSystem::SendPacket
(007390CD) TSFTPFileSystem::SendPacketAndReceiveResponse
(00739706) TSFTPFileSystem::RealPath
(00739E3E) TSFTPFileSystem::RealPath
(00748099) TSFTPFileSystem::ChangeDirectory
(0077A3B6) TTerminal::ChangeDirectory
(00657E12) TCustomUnixDriveView::Change
(002853FE) Vcl::Comctrls::TCustomTreeView::CNNotify
(0040BF9D) Customdriveview::TCustomDriveView::CNNotify
(0024E715) Vcl::Controls::TWinControl::WndProc
(002856BA) Vcl::Comctrls::TCustomTreeView::WndProc
(0024E87B) Vcl::Controls::_17076
(0024E715) Vcl::Controls::TWinControl::WndProc
(0024DD5C) Vcl::Controls::TWinControl::MainWndProc
(0037264C) System::Classes::_18201
(000374F1) USER32.dll
(00015C3B) USER32.dll
(0001581B) USER32.dll
(0001C167) USER32.dll
(00077E54) ntdll.dll.KiUserCallbackDispatcher
(00014EDE) USER32.dll.SendMessageW
(0007DBD8) COMCTL32.DLL
(00034F23) COMCTL32.DLL
(00034D8A) COMCTL32.DLL
(00066AE2) COMCTL32.DLL
(00039351) COMCTL32.DLL
(000374F1) USER32.dll
(00015C3B) USER32.dll
(000159D2) USER32.dll.CallW

The problem happens rarely. I cannot reproduce it.

Reply with quote

daniel.soudry@...
Guest

Error changing directory to '/vega/stats/users/ds3293/SourceExtraction/NMF_Results' - _ssh_send_port_open

<Try to describe precise steps that lead to the problem (where do you click, what keys do you press, what do you see, etc.)>
<If relevant, consider attaching a session log file or a screenshot)>

WinSCP 5.9

Error message:
Error changing directory to '/vega/stats/users/ds3293/SourceExtraction/NMF_Results'.

Invalid access to memory.

Stack trace:
(00629596) _ssh_send_port_open
(0086216E) C5073_3
(008641D6) ____ExceptionHandler
(00860F90) __ExceptionHandler
(0008A61F) ntdll.dll
(00077E7A) ntdll.dll.KiUserExceptionDispatcher
(006296FF) _get_ssh_exitcode
(006FA4AE) TSecureShell::CheckConnection
(006F8BA7) TSecureShell::Send
(00735111) TSFTPFileSystem::SendPacket
(007390CD) TSFTPFileSystem::SendPacketAndReceiveResponse
(00739706) TSFTPFileSystem::RealPath
(00739E3E) TSFTPFileSystem::RealPath
(00748099) TSFTPFileSystem::ChangeDirectory
(0077A3B6) TTerminal::ChangeDirectory
(00657E12) TCustomUnixDriveView::Change
(002853FE) Vcl::Comctrls::TCustomTreeView::CNNotify
(0040BF9D) Customdriveview::TCustomDriveView::CNNotify
(0024E715) Vcl::Controls::TWinControl::WndProc
(002856BA) Vcl::Comctrls::TCustomTreeView::WndProc
(0024E87B) Vcl::Controls::_17076
(0024E715) Vcl::Controls::TWinControl::WndProc
(0024DD5C) Vcl::Controls::TWinControl::MainWndProc
(0037264C) System::Classes::_18201
(000374F1) USER32.dll
(00015C3B) USER32.dll
(0001581B) USER32.dll
(0001C167) USER32.dll
(00077E54) ntdll.dll.KiUserCallbackDispatcher
(00014EDE) USER32.dll.SendMessageW
(0007DBD8) COMCTL32.DLL
(00034F23) COMCTL32.DLL
(00034D8A) COMCTL32.DLL
(00066AE2) COMCTL32.DLL
(00039351) COMCTL32.DLL
(000374F1) USER32.dll
(00015C3B) USER32.dll
(000159D2) US

The problem happens rarely. I cannot reproduce it.

Reply with quote

akardaras@...
Guest

Error changing directory to 'app' - _ssh_send_port_open

<Try to describe precise steps that lead to the problem (where do you click, what keys do you press, what do you see, etc.)>

I opened a .js file to edit in winscp. A while (an hour or two?) later I pasted in some text and clicked save, then got this error.

<If relevant, consider attaching a session log file or a screenshot)>

WinSCP 5.9

Error message:
Error changing directory to 'app'.

Invalid access to memory.

Stack trace:
(00629596) _ssh_send_port_open
(0086216E) C5073_3
(008641D6) ____ExceptionHandler
(00860F90) __ExceptionHandler
(0005A60A) ntdll.dll
(0000F12E) ntdll.dll.KiUserExceptionDispatcher
(006296FF) _get_ssh_exitcode
(006FA4AE) TSecureShell::CheckConnection
(006F8BA7) TSecureShell::Send
(00735111) TSFTPFileSystem::SendPacket
(007390CD) TSFTPFileSystem::SendPacketAndReceiveResponse
(00739706) TSFTPFileSystem::RealPath
(00739E3E) TSFTPFileSystem::RealPath
(00748099) TSFTPFileSystem::ChangeDirectory
(0077A3B6) TTerminal::ChangeDirectory
(006549CB) TUnixDirView::ChangeDirectory
(00652E02) TUnixDirView::ExecuteFile
(004058C2) Customdirview::TCustomDirView::DoExecute
(0040648F) Customdirview::TCustomDirView::WMLButtonDblClk
(0024E715) Vcl::Controls::TWinControl::WndProc
(00292643) Vcl::Comctrls::TCustomListView::WndProc
(0037264C) System::Classes::_18201
(000152F7) USER32.dll
(00015D35) USER32.dll
(0001FD22) USER32.dll
(0001FD48) USER32.dll.CallWindowProcW
(0042BD7F) Dragdrop::TDragDrop::WndMethod
(0037264C) System::Classes::_18201
(000152F7) USER32.dll
(00015D35) USER32.dll
(000167BF) USER32.dll
(00016885) USER32.dll.DispatchMessageW

(008627D9) C5073_3
(00863DB3) _ReThrowException
(00739BD9) TSFTPFileSystem::RealPath
(00739E3E) TSFTPFileSystem::RealPath
(00748099) TSFTPFileSystem::ChangeDirectory
(0077A3B6) TTerminal::ChangeDirectory

The problem happens rarely. I cannot reproduce it.

Reply with quote

Advertisement

malek_lat@...
Guest

Accès mémoire invalide - _ssh_send_port_open

<Try to describe precise steps that lead to the problem (where do you click, what keys do you press, what do you see, etc.)>
<If relevant, consider attaching a session log file or a screenshot)>

WinSCP 5.8.4

Error message:
Accès mémoire invalide.

Trace de la pile :
(00629432) _ssh_send_port_open
(00861DD6) C5073_3
(00863E3E) ____ExceptionHandler
(00860BF8) __ExceptionHandler
(0005A466) ntdll.dll
(0000F12E) ntdll.dll.KiUserExceptionDispatcher
(0062959B) _get_ssh_exitcode
(006FAE5B) TSecureShell::HandleNetworkEvents
(006FAFE6) TSecureShell::ProcessNetworkEvents
(006FA5D7) TSecureShell::WaitForData
(006F59E1) TSecureShell::Init
(006F52B6) TSecureShell::Open
(007332FF) TSFTPFileSystem::Open
(0076DC27) TTerminal::Reopen
(006C5681) TTerminalThread::TerminalReopenEvent
(006C0648) TSignalThread::Execute
(00098247) Userinterface::C20_0
(000123A8) kernel32.dll.BaseThreadInitThunk
(00038F70) ntdll.dll
(00038F40) ntdll.dll

(00862441) C5073_3
(00863A1B) _ReThrowException
(006F5AEF) TSecureShell::Init
(006F52B6) TSecureShell::Open
(007332FF) TSFTPFileSystem::Open
(0076DC27) TTerminal::Reopen
(006C5681) TTerminalThread::TerminalReopenEvent
(006C0648) TSignalThread::Execute
(00098247) Userinterface::C20_0
(000123A8) kernel32.dll.BaseThreadInitThunk
(00038F70) ntdll.dll
(00038F40) ntdll.dll
Erreur d'authentification

The problem happens rarely. I cannot reproduce it.

Reply with quote

akardaras@...
Guest

Cannot open remote file '/www/htdocs/nycbar/cgi-bin/subscribe.pl' - _ssh_send_port_open

<Try to describe precise steps that lead to the problem (where do you click, what keys do you press, what do you see, etc.)>
<If relevant, consider attaching a session log file or a screenshot)>

I had my Winscp connection open in the background for a while. i brought it to frotn and right-clicked a document and selected "edit with... sublime text" then got the error

WinSCP 5.9

Error message:
Cannot open remote file '/www/htdocs/nycbar/cgi-bin/subscribe.pl'.

Invalid access to memory.

Stack trace:
(00629596) _ssh_send_port_open
(0086216E) C5073_3
(008641D6) ____ExceptionHandler
(00860F90) __ExceptionHandler
(0005A60A) ntdll.dll
(0000F12E) ntdll.dll.KiUserExceptionDispatcher
(006296FF) _get_ssh_exitcode
(006FA4AE) TSecureShell::CheckConnection
(006F8BA7) TSecureShell::Send
(00735111) TSFTPFileSystem::SendPacket
(007390CD) TSFTPFileSystem::SendPacketAndReceiveResponse
(0075D6F2) TSFTPFileSystem::SFTPOpenRemoteFile
(007615F5) TSFTPFileSystem::SFTPSink
(0075F81E) TSFTPFileSystem::SFTPSinkRobust
(0075F612) TSFTPFileSystem::CopyToLocal
(00784069) TTerminal::CopyToLocal
(0001164D) TCustomScpExplorerForm::TemporarilyDownloadFiles
(00012271) TCustomScpExplorerForm::ExecuteFile
(00012856) TCustomScpExplorerForm::ExecuteFile

I know how to reproduce the problem or the problem happens frequently enough. I wish to be contacted by the WinSCP team to help resolving the problem.

Reply with quote

ryan.lindsey@...
Guest

Error changing directory to '/etc' - _ssh_send_port_open

Left a window open overnight, and when I tried to change directories (Tree view and file view) later, I got this error. I have done this in the past, with no issues. After 5.9 update, but

This might have happened because an RSA key that I logged in with was no longer loaded with PAgent, but I though I restarted WinSCP after that. I'm posting because the nice dialogue asked me to.

Problem happened once so far. I got the error multiple times when I tried to change directories on the current session, but when reconnecting the problem is no longer there.

WinSCP 5.9

Error message:
Error changing directory to '/etc'.

Invalid access to memory.

Stack trace:
(00629596) _ssh_send_port_open
(0086216E) C5073_3
(008641D6) ____ExceptionHandler
(00860F90) __ExceptionHandler
(0008A61F) ntdll.dll
(00077E7A) ntdll.dll.KiUserExceptionDispatcher
(006296FF) _get_ssh_exitcode
(006FA4AE) TSecureShell::CheckConnection
(006F8BA7) TSecureShell::Send
(00735111) TSFTPFileSystem::SendPacket
(007390CD) TSFTPFileSystem::SendPacketAndReceiveResponse
(00739706) TSFTPFileSystem::RealPath
(00739E3E) TSFTPFileSystem::RealPath
(00748099) TSFTPFileSystem::ChangeDirectory
(0077A3B6) TTerminal::ChangeDirectory
(00657E12) TCustomUnixDriveView::Change
(002853FE) Vcl::Comctrls::TCustomTreeView::CNNotify
(0040BF9D) Customdriveview::TCustomDriveView::CNNotify
(0024E715) Vcl::Controls::TWinControl::WndProc
(002856BA) Vcl::Comctrls::TCustomTreeView::WndProc
(0024E87B) Vcl::Controls::_17076
(0024E715) Vcl::Controls::TWinControl::WndProc
(0024DD5C) Vcl::Controls::TWinControl::MainWndProc
(0037264C) System::Classes::_18201
(000374F1) USER32.dll
(00015C3B) USER32.dll
(0001581B) USER32.dll
(0001C167) USER32.dll
(00077E54) ntdll.dll.KiUserCallbackDispatcher
(00014EDE) USER32.dll.SendMessageW
(0007DBD8) COMCTL32.DLL
(00034F23) COMCTL32.DLL
(00034D8A) COMCTL32.DLL
(00066AE2) COMCTL32.DLL
(00039351) COMCTL32.DLL
(000374F1) USER32.dll
(00015C3B) USER32.dll
(000159D2) USER32.dll.CallWindowProcW
(0024E826) Vcl::Con

The problem happens rarely. I cannot reproduce it.

Reply with quote

martin
Site Admin
martin avatar
Joined:
Posts:
31,598
Location:
Prague, Czechia

Re: Cannot open remote file '/www/htdocs/nycbar/cgi-bin/subscribe.pl' - _ssh_send_port_open

Thanks for your report.
I have sent you an email with a debug version of WinSCP to the address you have used to register on this forum.

Reply with quote

Advertisement

hcmello@...
Guest

Invalid access to memory - _ssh_send_port_open

Error ocurred when I restarted the remote server.

WinSCP 5.9

Error message:
Invalid access to memory.

Stack trace:
(00629596) _ssh_send_port_open
(0086216E) C5073_3
(008641D6) ____ExceptionHandler
(00860F90) __ExceptionHandler
(0003CF4E) ntdll.dll
(0003CDB6) ntdll.dll.KiUserExceptionDispatcher
(006296FF) _get_ssh_exitcode
(006FAFEF) TSecureShell::HandleNetworkEvents
(006FB17A) TSecureShell::ProcessNetworkEvents
(006FA76B) TSecureShell::WaitForData
(006F5B75) TSecureShell::Init
(006F544A) TSecureShell::Open
(0073352B) TSFTPFileSystem::Open
(0076DE53) TTerminal::Reopen
(006C57B9) TTerminalThread::TerminalReopenEvent
(006C0780) TSignalThread::Execute
(0009836F) Userinterface::C20_0
(0001395B) KERNEL32.DLL.BaseThreadInitThunk
(000488EC) ntdll.dll
(000488BF) ntdll.dll

(008627D9) C5073_3
(00863DB3) _ReThrowException
(006F5C83) TSecureShell::Init
(006F544A) TSecureShell::Open
(0073352B) TSFTPFileSystem::Open
(0076DE53) TTerminal::Reopen
(006C57B9) TTerminalThread::TerminalReopenEvent
(006C0780) TSignalThread::Execute
(0009836F) Userinterface::C20_0
(0001395B) KERNEL32.DLL.BaseThreadInitThunk
(000488EC) ntdll.dll
(000488BF) ntdll.dll
Authentication failed.

The problem happens rarely. I cannot reproduce it.

Reply with quote

benjamin.mabille@...
Guest

Erreur lors du changemenent de répertoire vers '..' - _ssh_send_port_open

<Try to describe precise steps that lead to the problem (where do you click, what keys do you press, what do you see, etc.)>
<If relevant, consider attaching a session log file or a screenshot)>

WinSCP 5.9

Error message:
Erreur lors du changemenent de répertoire vers '..'.

Accès mémoire invalide.

Trace de la pile :
(00629596) _ssh_send_port_open
(0086216E) C5073_3
(008641D6) ____ExceptionHandler
(00860F90) __ExceptionHandler
(0003EE3E) ntdll.dll.ZwWow64CallFunction64
(0003F5BA) ntdll.dll.KiUserExceptionDispatcher
(006296FF) _get_ssh_exitcode
(006FA4AE) TSecureShell::CheckConnection
(006F8BA7) TSecureShell::Send
(00735111) TSFTPFileSystem::SendPacket
(007390CD) TSFTPFileSystem::SendPacketAndReceiveResponse
(00739706) TSFTPFileSystem::RealPath
(00739E3E) TSFTPFileSystem::RealPath
(00748099) TSFTPFileSystem::ChangeDirectory
(0077A3B6) TTerminal::ChangeDirectory
(006549CB) TUnixDirView::ChangeDirectory
(00652E66) TUnixDirView::ExecuteParentDirectory
(00407ECC) Customdirview::TCustomDirView::Execute
(004058C2) Customdirview::TCustomDirView::DoExecute
(0040648F) Customdirview::TCustomDirView::WMLButtonDblClk
(0024E715) Vcl::Controls::TWinControl::WndProc
(00292643) Vcl::Comctrls::TCustomListView::WndProc
(0037264C) System::Classes::_18201
(00007E6F) USER32.DLL.CallNextHookEx
(000080CC) USER32.DLL
(0000C6C0) USER32.DLL.CallWindowProcW
(0003D11F) COMCTL32.DLL.DefSubclassProc
(0003D101) COMCTL32.DLL.DefSubclassProc
(0002B1FC) COMCTL32.DLL
(0003CED0) COMCTL32.DLL
(00007E6F) USER32.DLL.CallNextHookEx
(000080CC) USER32.DLL
(0000C6C0) USER32.DLL.CallWindowProcW
(0042BD7F) Dragdrop::TDragDrop::WndMethod
(0037264C) System::Classes::_18201
(00

The problem happens rarely. I cannot reproduce it.

Reply with quote

v.bulmerincq@...
Guest

Fehler beim Wechseln in Verzeichnis 'fowid' - _ssh_send_port_open

This happens frequently, when I try to change the remote directory. Then I have to close and restart the WinSCP application.

WinSCP 5.9

Error message:
Fehler beim Wechseln in Verzeichnis 'fowid'.

Zugriffsverletzung - ungültiger Zugriff auf den Speicher.

Stack trace:
(00629596) _ssh_send_port_open
(0086216E) C5073_3
(008641D6) ____ExceptionHandler
(00860F90) __ExceptionHandler
(000A284F) ntdll.dll
(0009034A) ntdll.dll.KiUserExceptionDispatcher
(006296FF) _get_ssh_exitcode
(006FA4AE) TSecureShell::CheckConnection
(006F8BA7) TSecureShell::Send
(00735111) TSFTPFileSystem::SendPacket
(007390CD) TSFTPFileSystem::SendPacketAndReceiveResponse
(00739706) TSFTPFileSystem::RealPath
(00739E3E) TSFTPFileSystem::RealPath
(00748099) TSFTPFileSystem::ChangeDirectory
(0077A3B6) TTerminal::ChangeDirectory
(006549CB) TUnixDirView::ChangeDirectory
(00652E02) TUnixDirView::ExecuteFile
(004058C2) Customdirview::TCustomDirView::DoExecute
(0040648F) Customdirview::TCustomDirView::WMLButtonDblClk
(0024E715) Vcl::Controls::TWinControl::WndProc
(00292643) Vcl::Comctrls::TCustomListView::WndProc
(0037264C) System::Classes::_18201
(00034D91) USER32.dll
(00018F35) USER32.dll
(00018806) USER32.dll.CallWindowProcW
(00098CBA) COMCTL32.DLL
(00098CA1) COMCTL32.DLL
(00098ADC) COMCTL32.DLL
(00034D91) USER32.dll
(00018F35) USER32.dll
(00018806) USER32.dll.CallWindowProcW
(0042BD7F) Dragdrop::TDragDrop::WndMethod
(0037264C) System::Classes::_18201
(00034D91) USER32.dll
(00018F35) USER32.dll
(00018A7B) USER32.dll
(000188CB) USER32.dll.DispatchMessageW

(008627D9) C5073_3
(00863DB3

The problem happens rarely. I cannot reproduce it.

Reply with quote

john@...
Guest

Cannot change properties of file 'install.com' - _ssh_send_port_open

<Try to describe precise steps that lead to the problem (where do you click, what keys do you press, what do you see, etc.)>
<If relevant, consider attaching a session log file or a screenshot)>

WinSCP 5.9

Error message:
Cannot change properties of file 'install.com'.

Invalid access to memory.

Stack trace:
#00629596# _ssh_send_port_open
#0086216E# C5073_3
#008641D6# ____ExceptionHandler
#00860F90# __ExceptionHandler
#0008A61F# ntdll.dll
#00077E7A# ntdll.dll.KiUserExceptionDispatcher
#006296FF# _get_ssh_exitcode
#006FA4AE# TSecureShell::CheckConnection
#006F8BA7# TSecureShell::Send
#00735111# TSFTPFileSystem::SendPacket
#0074B921# TSFTPFileSystem::SendCustomReadFile
#0074BC92# TSFTPFileSystem::CustomReadFile
#0074B6D2# TSFTPFileSystem::ReadFile
#0074E699# TSFTPFileSystem::ChangeFileProperties
#0077778F# TTerminal::DoChangeFileProperties
#00777660# TTerminal::ChangeFileProperties
#007754AD# TTerminal::ProcessFiles
#0077790C# TTerminal::ChangeFilesProperties
#000156B0# TCustomScpExplorerForm::SetProperties
#0000E76F# TCustomScpExplorerForm::ExecuteFileOperation
#0000E9E4# TCustomScpExplorerForm::ExecuteFileOperation
#0000EA6B# TCustomScpExplorerForm::ExecuteFileOperationCommand
#00036CE6# TNonVisualDataModule::ExplorerActionsExecute
#003B4768# System::Actions::TContainedActionList::ExecuteAction
#0019B96D# Vcl::Actnlist::TCustomAction::Execute
#0037264C# System::Classes::_18201
#000374F1# USER32.dll
#00015C3B# USER32.dll
#0001553C# USER32.dll
#000152FB# USER32.dll.DispatchMessageW

The problem happens rarely. I cannot reproduce it.

Reply with quote

Advertisement

sergiat24@...
Guest

No puedo abrir el archivo remoto «/var/www/cgi-bin/comun/sergi_GSLB.py» - _ssh_send_port_open

<Try to describe precise steps that lead to the problem (where do you click, what keys do you press, what do you see, etc.)>
<If relevant, consider attaching a session log file or a screenshot)>

WinSCP 5.9.1

Error message:
No puedo abrir el archivo remoto «/var/www/cgi-bin/comun/sergi_GSLB.py».

Acceso a memoria no válido

Traza de la pila:
(0062968A) _ssh_send_port_open
(00862736) C5073_3
(0086479E) ____ExceptionHandler
(00861558) __ExceptionHandler
(0005A466) ntdll.dll
(0000F12E) ntdll.dll.KiUserExceptionDispatcher
(006297F3) _get_ssh_exitcode
(006FADAA) TSecureShell::CheckConnection
(006F94A3) TSecureShell::Send
(0073550D) TSFTPFileSystem::SendPacket
(007394C9) TSFTPFileSystem::SendPacketAndReceiveResponse
(0075DAEE) TSFTPFileSystem::SFTPOpenRemoteFile
(007619F1) TSFTPFileSystem::SFTPSink
(0075FC1A) TSFTPFileSystem::SFTPSinkRobust
(0075FA0E) TSFTPFileSystem::CopyToLocal
(007846E1) TTerminal::CopyToLocal
(00011735) TCustomScpExplorerForm::TemporarilyDownloadFiles
(00012359) TCustomScpExplorerForm::ExecuteFile
(0001293E) TCustomScpExplorerForm::ExecuteFile
(000180ED) TCustomScpExplorerForm::DoDirViewExecFile
(00017FC2) TCustomScpExplorerForm::DirViewExecFile
(00408034) Customdirview::TCustomDirView::Execute
(00405A42) Customdirview::TCustomDirView::DoExecute
(0040660F) Customdirview::TCustomDirView::WMLButtonDblClk
(0024EA59) Vcl::Controls::TWinControl::WndProc
(00292987) Vcl::Comctrls::TCustomListView::WndProc
(00372990) System::Classes::_18201
(000152F7) USER32.dll
(00015D35) USER32.dll
(0001FD22) USER32.dll
(0001FD48) USER32.dll.CallWindowProcW
(0042BE5F) Dragdrop::TDragDrop::WndMethod
(00372990) System::Classes::_18201
(0001

The problem happens rarely. I cannot reproduce it.

Reply with quote

arson_person@hotmail,com
Guest

Invalid access to memory - _ssh_send_port_open

<Try to describe precise steps that lead to the problem (where do you click, what keys do you press, what do you see, etc.)>
<If relevant, consider attaching a session log file or a screenshot)>

WinSCP 5.9.1

Error message:
Invalid access to memory.

Stack trace:
(0062968A) _ssh_send_port_open
(00862736) C5073_3
(0086479E) ____ExceptionHandler
(00861558) __ExceptionHandler
(0003E4EE) ntdll.dll
(0003E366) ntdll.dll.KiUserExceptionDispatcher
(006297F3) _get_ssh_exitcode
(006FB8EB) TSecureShell::HandleNetworkEvents
(006FBA76) TSecureShell::ProcessNetworkEvents
(006FB067) TSecureShell::WaitForData
(006F6471) TSecureShell::Init
(006F5D46) TSecureShell::Open
(00733927) TSFTPFileSystem::Open
(0076E4CB) TTerminal::Reopen
(006C5D75) TTerminalThread::TerminalReopenEvent
(006C0D3C) TSignalThread::Execute
(000986B3) Userinterface::C20_0
(0001819D) KERNEL32.DLL.BaseThreadInitThunk
(000498C9) ntdll.dll
(0004989C) ntdll.dll

(00862DA1) C5073_3
(0086437B) _ReThrowException
(006F657F) TSecureShell::Init
(006F5D46) TSecureShell::Open
(00733927) TSFTPFileSystem::Open
(0076E4CB) TTerminal::Reopen
(006C5D75) TTerminalThread::TerminalReopenEvent
(006C0D3C) TSignalThread::Execute
(000986B3) Userinterface::C20_0
(0001819D) KERNEL32.DLL.BaseThreadInitThunk
(000498C9) ntdll.dll
(0004989C) ntdll.dll
Authentication failed.

The problem happens rarely. I cannot reproduce it.

Reply with quote

joerg@...
Guest

Kann die entfernte Datei '/var/www-otrs-produktiv/cgi-bin/modify_client_local.pl' nicht öffnen - _ssh_send_port_open

Connection breaks if network temporarly goes away

<Try to describe precise steps that lead to the problem (where do you click, what keys do you press, what do you see, etc.)>
<If relevant, consider attaching a session log file or a screenshot)>

WinSCP 5.9.1

Error message:
Kann die entfernte Datei '/var/www-otrs-produktiv/cgi-bin/modify_client_local.pl' nicht öffnen.

Zugriffsverletzung - ungültiger Zugriff auf den Speicher.

Stack trace:
(0062968A) _ssh_send_port_open
(00862736) C5073_3
(0086479E) ____ExceptionHandler
(00861558) __ExceptionHandler
(00062496) ntdll.dll
(0000F13E) ntdll.dll.KiUserExceptionDispatcher
(006297F3) _get_ssh_exitcode
(006FADAA) TSecureShell::CheckConnection
(006F94A3) TSecureShell::Send
(0073550D) TSFTPFileSystem::SendPacket
(007394C9) TSFTPFileSystem::SendPacketAndReceiveResponse
(0075DAEE) TSFTPFileSystem::SFTPOpenRemoteFile
(007619F1) TSFTPFileSystem::SFTPSink
(0075FC1A) TSFTPFileSystem::SFTPSinkRobust
(0075FA0E) TSFTPFileSystem::CopyToLocal
(007846E1) TTerminal::CopyToLocal
(00011735) TCustomScpExplorerForm::TemporarilyDownloadFiles
(00012359) TCustomScpExplorerForm::ExecuteFile
(0001293E) TCustomScpExplorerForm::ExecuteFile
(00036E0F) TNonVisualDataModule::ExplorerActionsExecute
(003B4AAC) System::Actions::TContainedActionList::ExecuteAction
(0019BCB1) Vcl::Actnlist::TCustomAction::Execute
(00372990) System::Classes::_18201
(000152F7) USER32.dll
(00015D35) USER32.dll
(000167CE) USER32.dll
(00016895) USER32.dll.DispatchMessageW

I know how to reproduce the problem or the problem happens frequently enough. I wish to be contacted by the WinSCP team to help resolving the problem.

Reply with quote

martin
Site Admin
martin avatar
Joined:
Posts:
31,598
Location:
Prague, Czechia

Re: Kann die entfernte Datei '/var/www-otrs-produktiv/cgi-bin/modify_client_local.pl' nicht öffnen - _ssh_send_port_open

Thanks for your report.
I have sent you an email with a debug version of WinSCP to the address you have used to register on this forum.
_________________
Martin Prikryl

Reply with quote

Advertisement

ed.vidgen@...
Guest

Invalid access to memory - _ssh_send_port_open

<Try to describe precise steps that lead to the problem (where do you click, what keys do you press, what do you see, etc.)>
<If relevant, consider attaching a session log file or a screenshot)>
Since the 5.9 upgrade, I am constantly pestered to relogin and enter password. However, it is the first time I have seen this error message.

WinSCP 5.9

Error message:
Invalid access to memory.

Stack trace:
(00629596) _ssh_send_port_open
(0086216E) C5073_3
(008641D6) ____ExceptionHandler
(00860F90) __ExceptionHandler
(00062496) ntdll.dll
(0000F13E) ntdll.dll.KiUserExceptionDispatcher
(006296FF) _get_ssh_exitcode
(006FAFEF) TSecureShell::HandleNetworkEvents
(006FB17A) TSecureShell::ProcessNetworkEvents
(006FA76B) TSecureShell::WaitForData
(006F5B75) TSecureShell::Init
(006F544A) TSecureShell::Open
(0073352B) TSFTPFileSystem::Open
(0076DE53) TTerminal::Reopen
(006C57B9) TTerminalThread::TerminalReopenEvent
(006C0780) TSignalThread::Execute
(0009836F) Userinterface::C20_0
(00012388) kernel32.dll.BaseThreadInitThunk
(00038900) ntdll.dll
(000388D0) ntdll.dll

(008627D9) C5073_3
(00863DB3) _ReThrowException
(006F5C83) TSecureShell::Init
(006F544A) TSecureShell::Open
(0073352B) TSFTPFileSystem::Open
(0076DE53) TTerminal::Reopen
(006C57B9) TTerminalThread::TerminalReopenEvent
(006C0780) TSignalThread::Execute
(0009836F) Userinterface::C20_0
(00012388) kernel32.dll.BaseThreadInitThunk
(00038900) ntdll.dll
(000388D0) ntdll.dll
Authentication failed.

The problem happens rarely. I cannot reproduce it.

Reply with quote

alexey6630@...
Guest

Ошибка доступа к памяти - _ssh_send_port_open

<Try to describe precise steps that lead to the problem (where do you click, what keys do you press, what do you see, etc.)>
<If relevant, consider attaching a session log file or a screenshot)>

WinSCP 5.9.1

Error message:
Ошибка доступа к памяти.

Трассировка стека:
(0062968A) _ssh_send_port_open
(00862736) C5073_3
(0086479E) ____ExceptionHandler
(00861558) __ExceptionHandler
(0005A466) ntdll.dll
(0000F12E) ntdll.dll.KiUserExceptionDispatcher
(006297F3) _get_ssh_exitcode
(006FB8EB) TSecureShell::HandleNetworkEvents
(006FBA76) TSecureShell::ProcessNetworkEvents
(006FB067) TSecureShell::WaitForData
(006F6471) TSecureShell::Init
(006F5D46) TSecureShell::Open
(00733927) TSFTPFileSystem::Open
(0076E4CB) TTerminal::Reopen
(006C5D75) TTerminalThread::TerminalReopenEvent
(006C0D3C) TSignalThread::Execute
(000986B3) Userinterface::C20_0
(000123A8) kernel32.dll.BaseThreadInitThunk
(00038F70) ntdll.dll
(00038F40) ntdll.dll

(00862DA1) C5073_3
(0086437B) _ReThrowException
(006F657F) TSecureShell::Init
(006F5D46) TSecureShell::Open
(00733927) TSFTPFileSystem::Open
(0076E4CB) TTerminal::Reopen
(006C5D75) TTerminalThread::TerminalReopenEvent
(006C0D3C) TSignalThread::Execute
(000986B3) Userinterface::C20_0
(000123A8) kernel32.dll.BaseThreadInitThunk
(00038F70) ntdll.dll
(00038F40) ntdll.dll
Аутентификация не пройдена.

I know how to reproduce the problem or the problem happens frequently enough. I wish to be contacted by the WinSCP team to help resolving the problem.

Reply with quote

immyrichardson@...
Guest

Copying files to remote side failed - _ssh_send_port_open

<Try to describe precise steps that lead to the problem (where do you click, what keys do you press, what do you see, etc.)>
<If relevant, consider attaching a session log file or a screenshot)>

WinSCP 5.9

Error message:
Copying files to remote side failed.

Invalid access to memory.

Stack trace:
(00629596) _ssh_send_port_open
(0086216E) C5073_3
(008641D6) ____ExceptionHandler
(00860F90) __ExceptionHandler
(0008A61F) ntdll.dll
(00077E7A) ntdll.dll.KiUserExceptionDispatcher
(006296FF) _get_ssh_exitcode
(006FA4AE) TSecureShell::CheckConnection
(006F8E13) TSecureShell::SendLine
(006D797D) TSCPFileSystem::SendCommand
(006DC775) TSCPFileSystem::CopyToRemote
(007837C5) TTerminal::CopyToRemote
(0000DCE5) TCustomScpExplorerForm::ExecuteFileOperation
(0000E9E4) TCustomScpExplorerForm::ExecuteFileOperation
(0000EA6B) TCustomScpExplorerForm::ExecuteFileOperationCommand
(0000EBF2) TCustomScpExplorerForm::ExecuteCopyOperationCommand
(000370D3) TNonVisualDataModule::ExplorerActionsExecute
(003B4768) System::Actions::TContainedActionList::ExecuteAction
(0019B96D) Vcl::Actnlist::TCustomAction::Execute
(0037264C) System::Classes::_18201
(000374F1) USER32.dll
(00015C3B) USER32.dll
(0001553C) USER32.dll
(000152FB) USER32.dll.DispatchMessageW

I know how to reproduce the problem or the problem happens frequently enough. I wish to be contacted by the WinSCP team to help resolving the problem.

Reply with quote

axel.sandrowsky@...
Guest

Fehler beim Wechseln in Verzeichnis '..' - _ssh_send_port_open

<Try to describe precise steps that lead to the problem (where do you click, what keys do you press, what do you see, etc.)>
<If relevant, consider attaching a session log file or a screenshot)>

WinSCP 5.9.1

Error message:
Fehler beim Wechseln in Verzeichnis '..'.

Zugriffsverletzung - ungültiger Zugriff auf den Speicher.

Stack trace:
#0062968A# _ssh_send_port_open
#00862736# C5073_3
#0086479E# ____ExceptionHandler
#00861558# __ExceptionHandler
#00052DD6# ntdll.dll
#0000F13E# ntdll.dll.KiUserExceptionDispatcher
#006297F3# _get_ssh_exitcode
#006FADAA# TSecureShell::CheckConnection
#006F970F# TSecureShell::SendLine
#006D827D# TSCPFileSystem::SendCommand
#006D8C90# TSCPFileSystem::ExecCommand
#006D8D7F# TSCPFileSystem::ExecCommand
#006DA11E# TSCPFileSystem::ChangeDirectory
#0077AA2E# TTerminal::ChangeDirectory
#00654AC3# TUnixDirView::ChangeDirectory
#00652F5A# TUnixDirView::ExecuteParentDirectory
#0003802E# TNonVisualDataModule::ExplorerActionsExecute
#003B4AAC# System::Actions::TContainedActionList::ExecuteAction
#0019BCB1# Vcl::Actnlist::TCustomAction::Execute
#00372990# System::Classes::_18201
#000152F7# USER32.dll
#00015D35# USER32.dll
#000167CE# USER32.dll
#00016895# USER32.dll.DispatchMessageW

The problem happens rarely. I cannot reproduce it.

Reply with quote

Advertisement

danmendesdev@...
Guest

Erro ao alterar o directório para '/' - _ssh_send_port_open

<Try to describe precise steps that lead to the problem (where do you click, what keys do you press, what do you see, etc.)>
<If relevant, consider attaching a session log file or a screenshot)>

WinSCP 5.9.1

Error message:
Erro ao alterar o directório para '/'.

Acesso à memória inválido.

Stack trace:
(0062968A) _ssh_send_port_open
(00862736) C5073_3
(0086479E) ____ExceptionHandler
(00861558) __ExceptionHandler
(00062496) ntdll.dll
(0000F13E) ntdll.dll.KiUserExceptionDispatcher
(006297F3) _get_ssh_exitcode
(006FADAA) TSecureShell::CheckConnection
(006F94A3) TSecureShell::Send
(0073550D) TSFTPFileSystem::SendPacket
(007394C9) TSFTPFileSystem::SendPacketAndReceiveResponse
(00739B02) TSFTPFileSystem::RealPath
(0073A23A) TSFTPFileSystem::RealPath
(00748495) TSFTPFileSystem::ChangeDirectory
(0077AA2E) TTerminal::ChangeDirectory
(00770EA6) TTerminal::SetCurrentDirectoryW
(00654A9F) TUnixDirView::ChangeDirectory
(006531B6) TUnixDirView::ExecuteRootDirectory
(00038079) TNonVisualDataModule::ExplorerActionsExecute
(003B4AAC) System::Actions::TContainedActionList::ExecuteAction
(0019BCB1) Vcl::Actnlist::TCustomAction::Execute
(00372990) System::Classes::_18201
(000152F7) USER32.dll
(00015D35) USER32.dll
(000167CE) USER32.dll
(00016895) USER32.dll.DispatchMessageW

(00862DA1) C5073_3
(0086437B) _ReThrowException
(00739FD5) TSFTPFileSystem::RealPath
(0073A23A) TSFTPFileSystem::RealPath
(00748495) TSFTPFileSystem::ChangeDirectory
(0077AA2E) TTerminal::ChangeDirectory
(00770EA6) TTerminal::SetCurrentDirectoryW
(00654A9F) TUnixDirView::ChangeDirectory
(006531B6) TUnixDirView::ExecuteRootDirectory
(00038079) TNonVisualDataModule::Expl

The problem happens rarely. I cannot reproduce it.

Reply with quote

mrcalsan@...
Guest

No puedo ir al directorio HOME debido a un error - _ssh_send_port_open

<Try to describe precise steps that lead to the problem (where do you click, what keys do you press, what do you see, etc.)>
<If relevant, consider attaching a session log file or a screenshot)>

WinSCP 5.9.1

Error message:
No puedo ir al directorio HOME debido a un error.

Acceso a memoria no válido

Traza de la pila:
(0062968A) _ssh_send_port_open
(00862736) C5073_3
(0086479E) ____ExceptionHandler
(00861558) __ExceptionHandler
(00052DD6) ntdll.dll
(0000F13E) ntdll.dll.KiUserExceptionDispatcher
(006297F3) _get_ssh_exitcode
(006FADAA) TSecureShell::CheckConnection
(006F94A3) TSecureShell::Send
(0073550D) TSFTPFileSystem::SendPacket
(007394C9) TSFTPFileSystem::SendPacketAndReceiveResponse
(00739B02) TSFTPFileSystem::RealPath
(0073AAAD) TSFTPFileSystem::GetHomeDirectory
(0074794A) TSFTPFileSystem::HomeDirectory
(0077A6DF) TTerminal::HomeDirectory
(00654A2F) TUnixDirView::ChangeDirectory
(006530C8) TUnixDirView::ExecuteHomeDirectory
(00014F51) TCustomScpExplorerForm::HomeDirectory
(00046B3E) TScpCommanderForm::HomeDirectory
(000380B0) TNonVisualDataModule::ExplorerActionsExecute
(003B4AAC) System::Actions::TContainedActionList::ExecuteAction
(0019BCB1) Vcl::Actnlist::TCustomAction::Execute
(00372990) System::Classes::_18201
(000152F7) USER32.dll
(00015D35) USER32.dll
(000167CE) USER32.dll
(00016895) USER32.dll.DispatchMessageW

(00862DA1) C5073_3
(0086437B) _ReThrowException
(00739FD5) TSFTPFileSystem::RealPath
(0073AAAD) TSFTPFileSystem::GetHomeDirectory
(0074794A) TSFTPFileSystem::HomeDirectory
(0077A6DF) TTerminal::HomeDirectory
(00654A2F) TUnixDirView::ChangeDirectory
(006530C8) TUnixDirView::ExecuteHomeDirectory
(00014F51) TCustomS

The problem happens rarely. I cannot reproduce it.

Reply with quote

henrik.schulze.0353@...
Guest

Error changing directory to '/home/sud10/perfin/llvm-3.3/tools/clang/test/Driver/Inputs/gcc_version_parsing4/lib/gcc/i386-unknown-linux/4.7.99-rc5' - _ssh_send_port_open

<Try to describe precise steps that lead to the problem (where do you click, what keys do you press, what do you see, etc.)>
<If relevant, consider attaching a session log file or a screenshot)>

WinSCP 5.9.1

Error message:
Error changing directory to '/home/sud10/perfin/llvm-3.3/tools/clang/test/Driver/Inputs/gcc_version_parsing4/lib/gcc/i386-unknown-linux/4.7.99-rc5'.

Invalid access to memory.

Stack trace:
(0062968A) _ssh_send_port_open
(00862736) C5073_3
(0086479E) ____ExceptionHandler
(00861558) __ExceptionHandler
(0008A61F) ntdll.dll
(00077E7A) ntdll.dll.KiUserExceptionDispatcher
(006297F3) _get_ssh_exitcode
(006FADAA) TSecureShell::CheckConnection
(006F9672) TSecureShell::Send
(0073550D) TSFTPFileSystem::SendPacket
(007394C9) TSFTPFileSystem::SendPacketAndReceiveResponse
(00739B02) TSFTPFileSystem::RealPath
(0073A23A) TSFTPFileSystem::RealPath
(00748495) TSFTPFileSystem::ChangeDirectory
(0077AA2E) TTerminal::ChangeDirectory
(00657F0A) TCustomUnixDriveView::Change
(00285742) Vcl::Comctrls::TCustomTreeView::CNNotify
(0040C125) Customdriveview::TCustomDriveView::CNNotify
(0024EA59) Vcl::Controls::TWinControl::WndProc
(002859FE) Vcl::Comctrls::TCustomTreeView::WndProc
(0024EBBF) Vcl::Controls::_17076
(0024EA59) Vcl::Controls::TWinControl::WndProc
(0024E0A0) Vcl::Controls::TWinControl::MainWndProc
(00372990) System::Classes::_18201
(000374F1) USER32.dll
(00015C3B) USER32.dll
(0001581B) USER32.dll
(0001C167) USER32.dll
(00077E54) ntdll.dll.KiUserCallbackDispatcher
(00014EDE) USER32.dll.SendMessageW
(0007DBD8) COMCTL32.DLL
(00034F23) COMCTL32.DLL
(00034D8A) COMCTL32.DLL
(001084D2) COMCTL32.DLL
(000CF12C) COMCTL32.DLL
(

The problem happens rarely. I cannot reproduce it.

Reply with quote

nigel.dyer@...
Guest

Error changing directory to '/cluster/nigeldyer/janRNA/raw' - _ssh_send_port_open

I left WinSCP doing a large (2 * 8GByte) file transfer in background. When I returned the file transfers were still happening but the refresh remote directory button was not active and when I tried changing remote directory I got an error report as below. This has only happened once, but this is the first time I have been in this situation I suspect as I have not previously done large file transfers in background. The file transfers are still proceeding

WinSCP 5.9.1

Error message:
Error changing directory to '/cluster/nigeldyer/janRNA/raw'.

Invalid access to memory.

Stack trace:
(0062968A) _ssh_send_port_open
(00862736) C5073_3
(0086479E) ____ExceptionHandler
(00861558) __ExceptionHandler
(00052DD6) ntdll.dll
(0000F13E) ntdll.dll.KiUserExceptionDispatcher
(006297F3) _get_ssh_exitcode
(006FADAA) TSecureShell::CheckConnection
(006F94A3) TSecureShell::Send
(0073550D) TSFTPFileSystem::SendPacket
(007394C9) TSFTPFileSystem::SendPacketAndReceiveResponse
(00739B02) TSFTPFileSystem::RealPath
(0073A23A) TSFTPFileSystem::RealPath
(00748495) TSFTPFileSystem::ChangeDirectory
(0077AA2E) TTerminal::ChangeDirectory
(00657F0A) TCustomUnixDriveView::Change
(00285742) Vcl::Comctrls::TCustomTreeView::CNNotify
(0040C125) Customdriveview::TCustomDriveView::CNNotify
(0024EA59) Vcl::Controls::TWinControl::WndProc
(002859FE) Vcl::Comctrls::TCustomTreeView::WndProc
(0024EBBF) Vcl::Controls::_17076
(0024EA59) Vcl::Controls::TWinControl::WndProc
(0024E0A0) Vcl::Controls::TWinControl::MainWndProc
(00372990) System::Classes::_18201
(000152F7) USER32.dll
(00015D35) USER32.dll
(00015DE8) USER32.dll
(00015E49) USER32.dll
(0000F117) ntdll.dll.KiUserCallbackDispatcher
(000186D0) USER32.dll.SendMessageW
(0002B06D) COMCTL32.DLL
(000A846F) COMCTL32.DLL
(000A77FB) COMCTL32.DLL
(0004B30B) COMCTL32.DLL
(0004B226) COMCTL32.DLL
(000152F7) USER32.dll
(00015D35) USER32.dll
(0001FD32) USER32.dll
(0001FD58%

The problem happens rarely. I cannot reproduce it.

Reply with quote

Advertisement

ivan.caso@...
Guest

Error al intentar cambiar al directorio «/var/www/html/app/design/frontend/agorae» - _ssh_send_port_open

<Try to describe precise steps that lead to the problem (where do you click, what keys do you press, what do you see, etc.)>
<If relevant, consider attaching a session log file or a screenshot)>

WinSCP 5.9.1

Error message:
Error al intentar cambiar al directorio «/var/www/html/app/design/frontend/agorae».

Acceso a memoria no válido

Traza de la pila:
(0062968A) _ssh_send_port_open
(00862736) C5073_3
(0086479E) ____ExceptionHandler
(00861558) __ExceptionHandler
(0008A61F) ntdll.dll
(00077E7A) ntdll.dll.KiUserExceptionDispatcher
(006297F3) _get_ssh_exitcode
(006FADAA) TSecureShell::CheckConnection
(006F94A3) TSecureShell::Send
(0073550D) TSFTPFileSystem::SendPacket
(007394C9) TSFTPFileSystem::SendPacketAndReceiveResponse
(00739B02) TSFTPFileSystem::RealPath
(0073A23A) TSFTPFileSystem::RealPath
(00748495) TSFTPFileSystem::ChangeDirectory
(0077AA2E) TTerminal::ChangeDirectory
(00657F0A) TCustomUnixDriveView::Change
(00285742) Vcl::Comctrls::TCustomTreeView::CNNotify
(0040C125) Customdriveview::TCustomDriveView::CNNotify
(0024EA59) Vcl::Controls::TWinControl::WndProc
(002859FE) Vcl::Comctrls::TCustomTreeView::WndProc
(0024EBBF) Vcl::Controls::_17076
(0024EA59) Vcl::Controls::TWinControl::WndProc
(0024E0A0) Vcl::Controls::TWinControl::MainWndProc
(00372990) System::Classes::_18201
(000374F1) USER32.dll
(00015C3B) USER32.dll
(0001581B) USER32.dll
(0001C167) USER32.dll
(00077E54) ntdll.dll.KiUserCallbackDispatcher
(00014EDE) USER32.dll.SendMessageW
(0007DBD8) COMCTL32.DLL
(00034F23) COMCTL32.DLL
(00034D8A) COMCTL32.DLL
(00066AE2) COMCTL32.DLL
(00039351) COMCTL32.DLL
(000374F1) USER32.dll
(00015C3B) USER3

The problem happens rarely. I cannot reproduce it.

Reply with quote

christophe@...
Guest

Erreur lors du changemenent de répertoire vers '..' - _ssh_send_port_open

<Try to describe precise steps that lead to the problem (where do you click, what keys do you press, what do you see, etc.)>
<If relevant, consider attaching a session log file or a screenshot)>

WinSCP 5.9.1

Error message:
Erreur lors du changemenent de répertoire vers '..'.

Accès mémoire invalide.

Trace de la pile :
(0062968A) _ssh_send_port_open
(00862736) C5073_3
(0086479E) ____ExceptionHandler
(00861558) __ExceptionHandler
(0003EE3E) ntdll.dll.ZwWow64CallFunction64
(0003F5BA) ntdll.dll.KiUserExceptionDispatcher
(006297F3) _get_ssh_exitcode
(006FADAA) TSecureShell::CheckConnection
(006F94A3) TSecureShell::Send
(0073550D) TSFTPFileSystem::SendPacket
(007394C9) TSFTPFileSystem::SendPacketAndReceiveResponse
(00739B02) TSFTPFileSystem::RealPath
(0073A23A) TSFTPFileSystem::RealPath
(00748495) TSFTPFileSystem::ChangeDirectory
(0077AA2E) TTerminal::ChangeDirectory
(00654AC3) TUnixDirView::ChangeDirectory
(00652F5A) TUnixDirView::ExecuteParentDirectory
(00408054) Customdirview::TCustomDirView::Execute
(00405A42) Customdirview::TCustomDirView::DoExecute
(0040660F) Customdirview::TCustomDirView::WMLButtonDblClk
(0024EA59) Vcl::Controls::TWinControl::WndProc
(00292987) Vcl::Comctrls::TCustomListView::WndProc
(00372990) System::Classes::_18201
(00007E6F) USER32.DLL.CallNextHookEx
(000080CC) USER32.DLL
(0000C6C0) USER32.DLL.CallWindowProcW
(0003D11F) COMCTL32.DLL.DefSubclassProc
(0003D101) COMCTL32.DLL.DefSubclassProc
(0002B1FC) COMCTL32.DLL
(0003CED0) COMCTL32.DLL
(00007E6F) USER32.DLL.CallNextHookEx
(000080CC) USER32.DLL
(0000C6C0) USER32.DLL.CallWindowProcW
(0042BE5F) Dragdrop::TDragDrop::WndMethod
(00372990) System::Classes::_18201
(

The problem happens rarely. I cannot reproduce it.

Reply with quote

hashy@...
Guest

Fehler beim Wechseln in Verzeichnis '/home/hashy/django/kslbmx/templates/darkroom' - _ssh_send_port_open

<Try to describe precise steps that lead to the problem (where do you click, what keys do you press, what do you see, etc.)>
<If relevant, consider attaching a session log file or a screenshot)>

WinSCP 5.9.1

Error message:
Fehler beim Wechseln in Verzeichnis '/home/hashy/django/kslbmx/templates/darkroom'.

Zugriffsverletzung - ungültiger Zugriff auf den Speicher.

Stack trace:
(0062968A) _ssh_send_port_open
(00862736) C5073_3
(0086479E) ____ExceptionHandler
(00861558) __ExceptionHandler
(00052DD6) ntdll.dll
(0000F13E) ntdll.dll.KiUserExceptionDispatcher
(006297F3) _get_ssh_exitcode
(006FADAA) TSecureShell::CheckConnection
(006F94A3) TSecureShell::Send
(0073550D) TSFTPFileSystem::SendPacket
(007394C9) TSFTPFileSystem::SendPacketAndReceiveResponse
(00739B02) TSFTPFileSystem::RealPath
(0073A23A) TSFTPFileSystem::RealPath
(00748495) TSFTPFileSystem::ChangeDirectory
(0077AA2E) TTerminal::ChangeDirectory
(00657F0A) TCustomUnixDriveView::Change
(00285742) Vcl::Comctrls::TCustomTreeView::CNNotify
(0040C125) Customdriveview::TCustomDriveView::CNNotify
(0024EA59) Vcl::Controls::TWinControl::WndProc
(002859FE) Vcl::Comctrls::TCustomTreeView::WndProc
(0024EBBF) Vcl::Controls::_17076
(0024EA59) Vcl::Controls::TWinControl::WndProc
(0024E0A0) Vcl::Controls::TWinControl::MainWndProc
(00372990) System::Classes::_18201
(000152F7) USER32.dll
(00015D35) USER32.dll
(00015DE8) USER32.dll
(00015E49) USER32.dll
(0000F117) ntdll.dll.KiUserCallbackDispatcher
(000186D0) USER32.dll.SendMessageW
(0002B06D) COMCTL32.DLL
(000A846F) COMCTL32.DLL
(000A77FB) COMCTL32.DLL
(0004B30B) COMCTL32.DLL
(0004B226) COMCTL32.DLL
(000152F7) USER32.dll
(000

It came after a internet disconnect, after my daily reset and getting a new IP. normally it works fine with WinSCP...

I know how to reproduce the problem or the problem happens frequently enough. I wish to be contacted by the WinSCP team to help resolving the problem.

Reply with quote

yuantailing@...
Guest

无法打开远程文件'/home/yuan/Celiz-Online-Jugde-Web/web/api/mooc_score2.api.php'。 - _ssh_send_port_open

<Try to describe precise steps that lead to the problem (where do you click, what keys do you press, what do you see, etc.)>
<If relevant, consider attaching a session log file or a screenshot)>

WinSCP 5.9

Error message:
无法打开远程文件'/home/yuan/Celiz-Online-Jugde-Web/web/api/mooc_score2.api.php'。

无效的内存访问。

Stack trace:
(00629596) _ssh_send_port_open
(0086216E) C5073_3
(008641D6) ____ExceptionHandler
(00860F90) __ExceptionHandler
(0008A61F) ntdll.dll
(00077E7A) ntdll.dll.KiUserExceptionDispatcher
(006296FF) _get_ssh_exitcode
(006FA4AE) TSecureShell::CheckConnection
(006F8BA7) TSecureShell::Send
(00735111) TSFTPFileSystem::SendPacket
(007390CD) TSFTPFileSystem::SendPacketAndReceiveResponse
(0075D6F2) TSFTPFileSystem::SFTPOpenRemoteFile
(007615F5) TSFTPFileSystem::SFTPSink
(0075F81E) TSFTPFileSystem::SFTPSinkRobust
(0075F612) TSFTPFileSystem::CopyToLocal
(00784069) TTerminal::CopyToLocal
(0001164D) TCustomScpExplorerForm::TemporarilyDownloadFiles
(00012271) TCustomScpExplorerForm::ExecuteFile
(00012856) TCustomScpExplorerForm::ExecuteFile
(00018005) TCustomScpExplorerForm::DoDirViewExecFile
(00017EDA) TCustomScpExplorerForm::DirViewExecFile
(00407EAC) Customdirview::TCustomDirView::Execute
(004058C2) Customdirview::TCustomDirView::DoExecute
(0040648F) Customdirview::TCustomDirView::WMLButtonDblClk
(0024E715) Vcl::Controls::TWinControl::WndProc
(00292643) Vcl::Comctrls::TCustomListView::WndProc
(0037264C) System::Classes::_18201
(000374F1) USER32.dll
(00015C3B) USER32.dll
(000159D2) USER32.dll.CallWindowProcW
(00098CBA) COMCTL32.DLL
(00098CA1) COMCTL32.DLL
(0009

I know how to reproduce the problem or the problem happens frequently enough. I wish to be contacted by the WinSCP team to help resolving the problem.

Reply with quote

Advertisement

realkot@...
Guest

Не могу сменить каталог на '/opt/jboss/bin' - _ssh_send_port_open

<Try to describe precise steps that lead to the problem (where do you click, what keys do you press, what do you see, etc.)>
<If relevant, consider attaching a session log file or a screenshot)>

WinSCP 5.9

Error message:
Не могу сменить каталог на '/opt/jboss/bin'.

Ошибка доступа к памяти.

Трассировка стека:
(00629596)
(0086216E)
(008641D6)
(00860F90)
(0003EE3E) ntdll.dll.ZwWow64CallFunction64
(0003F5BA) ntdll.dll.KiUserExceptionDispatcher
(006296FF)
(006FA4AE)
(006F8BA7)
(00735111)
(007390CD)
(00739706)
(00739E3E)
(00748099)
(0077A3B6)
(0077ADA3)
(0077AA97)
(0079EB65)
(0079EC87)
(0079E93F)
(0024E715)
(001B688C)
(0024E87B)
(0024E715)
(00208BC4)
(00807E14) @@Synchronizeprogress@Finalize
(0024DD5C)
(0037264C)
(00007E6F) USER32.DLL.CallNextHookEx
(000080CC) USER32.DLL
(0000832E) USER32.DLL
(00008527) USER32.DLL
(0003F594) ntdll.dll.KiUserCallbackDispatcher
(00011B34) USER32.DLL.SendMessageW
(00050885) COMCTL32.DLL
(0005091D) COMCTL32.DLL
(00007E6F) USER32.DLL.CallNextHookEx
(000080CC) USER32.DLL
(0000C6C0) USER32.DLL.CallWindowProcW
(0024E826)
(0024E715)
(001B688C)
(0037264C)
(00007E6F) USER32.DLL.CallNextHookEx
(000080CC) USER32.DLL
(00009625) USER32.DLL
(0000967B) USER32.DLL.DispatchMessageW

(008627D9)
(00863DB3)
(00739BD9)
(00739E3E)
(00748099)
%

I know how to reproduce the problem or the problem happens frequently enough. I wish to be contacted by the WinSCP team to help resolving the problem.

Reply with quote

realkot@...
Guest

Не удалось удалить файл 'ors-app-1.1-20160830.132047-300.ear' - _ssh_send_port_open

<Try to describe precise steps that lead to the problem (where do you click, what keys do you press, what do you see, etc.)>
<If relevant, consider attaching a session log file or a screenshot)>

WinSCP 5.9

Error message:
Не удалось удалить файл 'ors-app-1.1-20160830.132047-300.ear'.

Ошибка доступа к памяти.

Трассировка стека:
(00629596)
(0086216E)
(008641D6)
(00860F90)
(0003EE3E) ntdll.dll.ZwWow64CallFunction64
(0003F5BA) ntdll.dll.KiUserExceptionDispatcher
(006296FF)
(006FA4AE)
(006F8BA7)
(00735111)
(007390CD)
(0074C0B4)
(0074C22A)
(00776143)
(0077601A)
(007754AD)
(007762BC)
(000140AF)
(0000E740)
(0000E9E4)
(0000EA6B)
(00036F20)
(003B4768)
(0019B96D)

I know how to reproduce the problem or the problem happens frequently enough. I wish to be contacted by the WinSCP team to help resolving the problem.

Reply with quote

m00s@...
Guest

Invalid access to memory - _ssh_send_port_open

Hi
It seems this problem was raised because of bad wi-fi.
I set connection to remote machine, then after some delay the wi-fi connection was failed, then I made wi-fi reconnect, then asked WinScp for search files.


WinSCP 5.9

Error message:
Invalid access to memory.

Stack trace:
(00629596) _ssh_send_port_open
(0086216E) C5073_3
(008641D6) ____ExceptionHandler
(00860F90) __ExceptionHandler
(00062496) ntdll.dll
(0000F13E) ntdll.dll.KiUserExceptionDispatcher
(006296FF) _get_ssh_exitcode
(006FA4AE) TSecureShell::CheckConnection
(006F8BA7) TSecureShell::Send
(00735111) TSFTPFileSystem::SendPacket
(007390CD) TSFTPFileSystem::SendPacketAndReceiveResponse
(0074872A) TSFTPFileSystem::ReadDirectory
(007743EF) TTerminal::CustomReadDirectory
(00774C7D) TTerminal::ReadDirectory
(00774946) TTerminal::DoReadDirectoryListing
(00774810) TTerminal::CustomReadDirectoryListing
(00774A6C) TTerminal::ProcessDirectory
(0078260D) TTerminal::DoFilesFind
(0078275D) TTerminal::FilesFind
(00024680) TCustomScpExplorerForm::DoFindFiles
(007B7FBA) TFileFindDialog::Start
(007B865F) TFileFindDialog::StartStopButtonClick
(0024E715) Vcl::Controls::TWinControl::WndProc
(001B688C) Vcl::Stdctrls::TButtonControl::WndProc
(0024E87B) Vcl::Controls::_17076
(0024E715) Vcl::Controls::TWinControl::WndProc
(00208BC4) Vcl::Forms::TCustomForm::WndProc
(00807E14) Vclcommon::C2754_0
(0024DD5C) Vcl::Controls::TWinControl::MainWndProc
(0037264C) System::Classes::_18201
(000152F7) USER32.dll
(00015D35) USER32.dll
(00015DE8) USER32.dll
(00015E49) USER32.dll
(0000F117) ntdll.dll.KiUserCallbackDispatcher
(000186D0) USER32.dll.SendMessageW
(000A359B) COMCTL32.DLL
(0P

I know how to reproduce the problem or the problem happens frequently enough. I wish to be contacted by the WinSCP team to help resolving the problem.

Reply with quote

pregenhardt@...
Guest

Error changing directory to 'rpp-chalice' - _ssh_send_port_open

Never seen this before. I had SCPed a directory of files & subdirectories over from another linux box...then used WinSCP to change the permissions, then double-clicked on that directory. Up came the exception.


WinSCP 5.9.1

Error message:
Error changing directory to 'rpp-chalice'.

Invalid access to memory.

Stack trace:
(0062968A) _ssh_send_port_open
(00862736) C5073_3
(0086479E) ____ExceptionHandler
(00861558) __ExceptionHandler
(0008A61F) ntdll.dll
(00077E7A) ntdll.dll.KiUserExceptionDispatcher
(006297F3) _get_ssh_exitcode
(006FADAA) TSecureShell::CheckConnection
(006F94A3) TSecureShell::Send
(0073550D) TSFTPFileSystem::SendPacket
(007394C9) TSFTPFileSystem::SendPacketAndReceiveResponse
(00739B02) TSFTPFileSystem::RealPath
(0073A23A) TSFTPFileSystem::RealPath
(00748495) TSFTPFileSystem::ChangeDirectory
(0077AA2E) TTerminal::ChangeDirectory
(00654AC3) TUnixDirView::ChangeDirectory
(00652EF6) TUnixDirView::ExecuteFile
(00405A42) Customdirview::TCustomDirView::DoExecute
(0040660F) Customdirview::TCustomDirView::WMLButtonDblClk
(0024EA59) Vcl::Controls::TWinControl::WndProc
(00292987) Vcl::Comctrls::TCustomListView::WndProc
(00372990) System::Classes::_18201
(000374F1) USER32.dll
(00015C3B) USER32.dll
(000159D2) USER32.dll.CallWindowProcW
(00098CBA) COMCTL32.DLL
(00098CA1) COMCTL32.DLL
(00098ADC) COMCTL32.DLL
(000374F1) USER32.dll
(00015C3B) USER32.dll
(000159D2) USER32.dll.CallWindowProcW
(0042BE5F) Dragdrop::TDragDrop::WndMethod
(00372990) System::Classes::_18201
(000374F1) USER32.dll
(00015C3B) USER32.dll
(0001553C) USER32.dll
(000152FB) USER32.dll.DispatchMessageW

(00862DA1) C5073_3
(0086437B) _ReThrowException
(00739FD5)%2

The problem happens rarely. I cannot reproduce it.

Reply with quote

Advertisement

lawrence.dol@...
Guest

Error changing directory to 'app' - _ssh_send_port_open

Left WinSCP open and connected at the end of the day and put the computer to S3 sleep. The next day I simply clicked on one of the remote folders to drill down into it; that resulted in this error.

WinSCP 5.9.1

Error message:
Error changing directory to 'app'.

Invalid access to memory.

Stack trace:
(0062968A)
(00862736)
(0086479E)
(00861558)
(0008137F) ntdll.dll
(0006EF1A) ntdll.dll.KiUserExceptionDispatcher
(006297F3)
(006FADAA)
(006F94A3)
(0073550D)
(007394C9)
(00739B02)
(0073A23A)
(00748495)
(0077AA2E)
(00654AC3) @TUnixDirView@ChangeDirectory$qqr20System@UnicodeString
(00652EF6) @TUnixDirView@ExecuteFile$qqrp22Vcl@Comctrls@TListItem
(00405A42)
(0040660F)
(0024EA59)
(00292987)
(00372990)
(0002C271) USER32.dll
(0000D845) USER32.dll
(0000CED2) USER32.dll.CallWindowProcW
(0007957A) COMCTL32.DLL
(00079561) COMCTL32.DLL
(0007939C) COMCTL32.DLL
(0002C271) USER32.dll
(0000D845) USER32.dll
(0000CED2) USER32.dll.CallWindowProcW
(0042BE5F)
(00372990)
(0002C271) USER32.dll
(0000D845) USER32.dll
(0000D19F) USER32.dll
(0000CF5B) USER32.dll.DispatchMessageW

(00862DA1)
(0086437B)
(00739FD5)
(0073A23A)
(00748495)
(0077AA2E)
(00654AC3) @TUnixDirView@ChangeDirectory$qqr20System@UnicodeString
(00652EF6) @TUnixDirView@ExecuteFile$qqrp22Vcl@Comctrls@TListItem
(00405A42)
(0040660F)
(0024EA59)
(00292987)
(00372990)
(0002C271) USER32.dll
(0000D845) USER32.dll
(0000CED2) USER32.dll.CallWindowProcW
(0007957A) COMCTL32.DLL
(00079561) COMCTL32.DLL
(0007939C) COMCTL32.DLL
(0002C271) USER32

The problem happens rarely. I cannot reproduce it.

Reply with quote

thestalwart1-software@...
Guest

Error changing directory to '/DIRECTORY REDACTED' - _ssh_send_port_open

Probably because I put my laptop to sleep for several hours before coming back to it.
I do not actually know if the problem is rare or reproducible.

<Try to describe precise steps that lead to the problem (where do you click, what keys do you press, what do you see, etc.)>
<If relevant, consider attaching a session log file or a screenshot)>

WinSCP 5.9.1

Error message:
Error changing directory to '/DIRECTORY REDACTED'.

Invalid access to memory.

Stack trace:
(0062968A) _ssh_send_port_open
(00862736) C5073_3
(0086479E) ____ExceptionHandler
(00861558) __ExceptionHandler
(0008137F) ntdll.dll
(0006EF1A) ntdll.dll.KiUserExceptionDispatcher
(006297F3) _get_ssh_exitcode
(006FADAA) TSecureShell::CheckConnection
(006F94A3) TSecureShell::Send
(0073550D) TSFTPFileSystem::SendPacket
(007394C9) TSFTPFileSystem::SendPacketAndReceiveResponse
(00739B02) TSFTPFileSystem::RealPath
(0073A23A) TSFTPFileSystem::RealPath
(00748495) TSFTPFileSystem::ChangeDirectory
(0077AA2E) TTerminal::ChangeDirectory
(00657F0A) TCustomUnixDriveView::Change
(00285742) Vcl::Comctrls::TCustomTreeView::CNNotify
(0040C125) Customdriveview::TCustomDriveView::CNNotify
(0024EA59) Vcl::Controls::TWinControl::WndProc
(002859FE) Vcl::Comctrls::TCustomTreeView::WndProc
(0024EBBF) Vcl::Controls::_17076
(0024EA59) Vcl::Controls::TWinControl::WndProc
(0024E0A0) Vcl::Controls::TWinControl::MainWndProc
(00372990) System::Classes::_18201
(0002C271) USER32.dll
(0000D845) USER32.dll
(0000D47B) USER32.dll
(00017AD7) USER32.dll
(0006EEF4) ntdll.dll.KiUserCallbackDispatcher
(0000FBCB) USER32.dll.SendMessageW
(000638A8) COMCTL32.DLL
(0002279B) COMCTL32.DLL
(00022606) COMCTL32.DLL
(0001C69E) COMCTL32.DLL
(000212AE) COMCTL32.DLL
(0002C271) USER32.dll
(0000D845) USER32.dll
(0000CED2) U

I know how to reproduce the problem or the problem happens frequently enough. I wish to be contacted by the WinSCP team to help resolving the problem.

Reply with quote

martin
Site Admin
martin avatar
Joined:
Posts:
31,598
Location:
Prague, Czechia

Re: Invalid access to memory - _ssh_send_port_open

Thanks for your reports.
I have sent you an email with a debug version of WinSCP to the address you have used to register on this forum.

Reply with quote

Advertisement

Goto page

1, 2, 3, 4, 5, Next

You can post new topics in this forum