Invalid access to memory - _count234

Advertisement

manuel.flury@...
Guest

Invalid access to memory - _count234

<Try to describe precise steps that lead to the problem (where do you click, what keys do you press, what do you see, etc.)>
<If relevant, consider attaching a session log file or a screenshot)>

WinSCP 5.7.2

Error message:
Invalid access to memory.

Stack trace:
(00609B1D) C2280_0
(007E0E6E) C4799_3
(007E2ED6) ____ExceptionHandler
(007DFE50) __ExceptionHandler
(0005A60A) ntdll.dll
(0000F12E) ntdll.dll.KiUserExceptionDispatcher
(006074A6) _count234
(006079AB) _add234
(0060B1A4) _sk_register
(0060B275) _putty_sk_new
(005E0FB1) _new_connection
(005E617E) C2232_0
(005F19DC) _sshfwd_unthrottle
(006A0E12) TSecureShell::Open
(006D2097) TSFTPFileSystem::Open
(0070B599) TTerminal::Reopen
(00672825) TTerminalThread::TerminalReopenEvent
(0066D7F8) TSignalThread::Execute
(000821F7) Userinterface::C21_0
(00012368) kernel32.dll.BaseThreadInitThunk
(000382B0) ntdll.dll
(00038280) ntdll.dll

(007E14D9) C4799_3
(007E2AB3) _ReThrowException
(006A0FCF) TSecureShell::Open
(006D2097) TSFTPFileSystem::Open
(0070B599) TTerminal::Reopen
(00672825) TTerminalThread::TerminalReopenEvent
(0066D7F8) TSignalThread::Execute
(000821F7) Userinterface::C21_0
(00012368) kernel32.dll.BaseThreadInitThunk
(000382B0) ntdll.dll
(00038280) ntdll.dll

(007E14D9) C4799_3
(007E2AB3) _ReThrowException
(0070A2D3) TTerminal::Open
(0070B599) TTerminal::Reopen
(00672825) TTerminalThread::TerminalReopenEvent
(0066D7F8) TSignalThread::Execute
(000821F7) Userinterface::C21_0
(00012368) kernel32.dll.BaseThreadInitThunk
(000382B0) ntdll.dll
(00038280) ntdll.dll

Reply with quote

Advertisement

martin
Site Admin
martin avatar
Joined:
Posts:
31,744
Location:
Prague, Czechia

Re: Invalid access to memory

Thanks for your report.
I have sent you an email with a debug version of WinSCP to address you have used to register on this forum.

Reply with quote

flyingfur@...
Guest

Invalid access to memory - _count234

<Try to describe precise steps that lead to the problem (where do you click, what keys do you press, what do you see, etc.)>
<If relevant, consider attaching a session log file or a screenshot)>

WinSCP 5.7.4

Error message:
Invalid access to memory.

Stack trace:
(0060AB8D) C2280_0
(007E344A) C4799_3
(007E54B2) ____ExceptionHandler
(007E242C) __ExceptionHandler
(0005A67A) ntdll.dll
(0000F15E) ntdll.dll.KiUserExceptionDispatcher
(00608516) _count234
(00608A1B) _add234
(0060C214) _sk_register
(0060C2E5) _putty_sk_new
(005E2021) _new_connection
(005E71EE) C2232_0
(005F2A4C) _sshfwd_unthrottle
(006A2472) TSecureShell::Open
(006D37DF) TSFTPFileSystem::Open
(0070CDD1) TTerminal::Reopen
(00673E01) TTerminalThread::TerminalReopenEvent
(0066EDD4) TSignalThread::Execute
(00082673) Userinterface::C21_0
(00012378) kernel32.dll.BaseThreadInitThunk
(000382E0) ntdll.dll
(000382B0) ntdll.dll

(007E3AB5) C4799_3
(007E508F) _ReThrowException
(006A262F) TSecureShell::Open
(006D37DF) TSFTPFileSystem::Open
(0070CDD1) TTerminal::Reopen
(00673E01) TTerminalThread::TerminalReopenEvent
(0066EDD4) TSignalThread::Execute
(00082673) Userinterface::C21_0
(00012378) kernel32.dll.BaseThreadInitThunk
(000382E0) ntdll.dll
(000382B0) ntdll.dll

(007E3AB5) C4799_3
(007E508F) _ReThrowException
(0070BA6E) TTerminal::Open
(0070CDD1) TTerminal::Reopen
(00673E01) TTerminalThread::TerminalReopenEvent
(0066EDD4) TSignalThread::Execute
(00082673) Userinterface::C21_0
(00012378) kernel32.dll.BaseThreadInitThunk
(000382E0) ntdll.dll
(000382B0) ntdll.dll

Reply with quote

martin
Site Admin
martin avatar
Joined:
Posts:
31,744
Location:
Prague, Czechia

Re: Invalid access to memory - _count234

Thanks for your report.
I have sent you an email with a debug version of WinSCP to address you have used to register on this forum.

Reply with quote

nokia82@...
Guest

Ошибка доступа к памяти - _count234

<Try to describe precise steps that lead to the problem (where do you click, what keys do you press, what do you see, etc.)>
<If relevant, consider attaching a session log file or a screenshot)>

WinSCP 5.7.7

Error message:
Ошибка доступа к памяти.

Трассировка стека:
(0060C139) C2280_0
(007E08AA) C4799_0
(007E2912) ____ExceptionHandler
(007DF88C) __ExceptionHandler
(0005A5DA) ntdll.dll
(0000F12E) ntdll.dll.KiUserExceptionDispatcher
(00609AC2) _count234
(00609FC7) _add234
(0060D7C0) _sk_register
(0060D891) _putty_sk_new
(005E349D) _new_connection
(005E86E2) C2232_0
(005F3FF8) _sshfwd_unthrottle
(006A3F4A) TSecureShell::Open
(0070D192) TTerminal::Open
(0067224C) TTerminalItem::ProcessEvent
(00670728) TSignalThread::Execute
(0008269F) Userinterface::C21_0
(00012378) kernel32.dll.BaseThreadInitThunk
(00038880) ntdll.dll
(00038850) ntdll.dll

(007E0F15) C4799_0
(007E24EF) _ReThrowException
(006A4107) TSecureShell::Open
(0070D192) TTerminal::Open
(0067224C) TTerminalItem::ProcessEvent
(00670728) TSignalThread::Execute
(0008269F) Userinterface::C21_0
(00012378) kernel32.dll.BaseThreadInitThunk
(00038880) ntdll.dll
(00038850) ntdll.dll

(007E0F15) C4799_0
(007E24EF) _ReThrowException
(0070D2BC) TTerminal::Open
(0067224C) TTerminalItem::ProcessEvent
(00670728) TSignalThread::Execute
(0008269F) Userinterface::C21_0
(00012378) kernel32.dll.BaseThreadInitThunk
(00038880) ntdll.dll
(00038850) ntdll.dll

(007E0F15) C4799_0
(007E24EF) _ReThrowException
(0070D6BE) TTerminal::Open
(0067224C) TTerminalItem::ProcessEvent
(00670728) TSignalThread::Execute
(0008269F) Userinterface::C21_0
(00012378)

The problem happens rarely. I cannot reproduce it.

Reply with quote

Advertisement

rickg@...
Guest

Invalid access to memory - _count234

<Try to describe precise steps that lead to the problem (where do you click, what keys do you press, what do you see, etc.)>
<If relevant, consider attaching a session log file or a screenshot)>

WinSCP 5.8.2

Error message:
Invalid access to memory.

Stack trace:
(006300CD) C2505_0
(0084095E) C5073_3
(008429C6) ____ExceptionHandler
(0083F940) __ExceptionHandler
(0008A61F) ntdll.dll
(00077E7A) ntdll.dll.KiUserExceptionDispatcher
(0062D5A2) _count234
(0062DAA7) _add234
(00631820) _sk_addr_dup
(006318F1) _putty_sk_new
(005FDA7D) _new_connection
(00603C3B) _ssh_connshare_log
(00610699) _sshfwd_x11_is_local
(006DBCDA) TSecureShell::Open
(0075236A) TTerminal::Open
(006AC35F) TTerminalThread::TerminalOpenEvent
(006A7334) TSignalThread::Execute
(00094477) Userinterface::C20_0
(000128F2) KERNEL32.DLL.BaseThreadInitThunk
(00064DE1) ntdll.dll
(00064DA9) ntdll.dll

(00840FC9) C5073_3
(008425A3) _ReThrowException
(006DBE97) TSecureShell::Open
(0075236A) TTerminal::Open
(006AC35F) TTerminalThread::TerminalOpenEvent
(006A7334) TSignalThread::Execute
(00094477) Userinterface::C20_0
(000128F2) KERNEL32.DLL.BaseThreadInitThunk
(00064DE1) ntdll.dll
(00064DA9) ntdll.dll

(00840FC9) C5073_3
(008425A3) _ReThrowException
(007524FF) TTerminal::Open
(006AC35F) TTerminalThread::TerminalOpenEvent
(006A7334) TSignalThread::Execute
(00094477) Userinterface::C20_0
(000128F2) KERNEL32.DLL.BaseThreadInitThunk
(00064DE1) ntdll.dll
(00064DA9) ntdll.dll

(00840FC9) C5073_3
(008425A3) _ReThrowException
(00752961) TTerminal::Open
(006AC35F) TTerminalThread::TerminalOpenEvent
(006A7334) TSignalThread::Execute
(00094477) Userinterf



I was just trying to save a profile for a local machine (a Raspberry Pi running OSMC). I had previously modified the profile to include the password in another running copy of WinSCP, and was trying to save it again since the current copy didn't have the password saved and the other copy was synchronizing a massive directory. Does that make sense?

Anyhow, I've been using WinSCP for many years and love using it.

The problem happens rarely. I cannot reproduce it.

Reply with quote

buri@...
Guest

Invalid access to memory - _count234

I was logged to my SSH via SOCKS5 proxy (via Putty SSH Tunnel). And some files show this error when I am copying files from local PC to remote server. (files like images, (png, ...)).

WinSCP 5.8.2

Error message:
Invalid access to memory.

Stack trace:
(006300CD) C2505_0
(0084095E) C5073_3
(008429C6) ____ExceptionHandler
(0083F940) __ExceptionHandler
(0008A61F) ntdll.dll
(00077E7A) ntdll.dll.KiUserExceptionDispatcher
(0062D5A2) _count234
(0062DAA7) _add234
(00631820) _sk_addr_dup
(006318F1) _putty_sk_new
(005FDA0F) _new_connection
(00603C3B) _ssh_connshare_log
(00610699) _sshfwd_x11_is_local
(006DBCDA) TSecureShell::Open
(0075236A) TTerminal::Open
(006A8E58) TTerminalItem::ProcessEvent
(006A7334) TSignalThread::Execute
(00094477) Userinterface::C20_0
(000128F2) KERNEL32.DLL.BaseThreadInitThunk
(00064DE1) ntdll.dll
(00064DA9) ntdll.dll

(00840FC9) C5073_3
(008425A3) _ReThrowException
(006DBE97) TSecureShell::Open
(0075236A) TTerminal::Open
(006A8E58) TTerminalItem::ProcessEvent
(006A7334) TSignalThread::Execute
(00094477) Userinterface::C20_0
(000128F2) KERNEL32.DLL.BaseThreadInitThunk
(00064DE1) ntdll.dll
(00064DA9) ntdll.dll

(00840FC9) C5073_3
(008425A3) _ReThrowException
(007524FF) TTerminal::Open
(006A8E58) TTerminalItem::ProcessEvent
(006A7334) TSignalThread::Execute
(00094477) Userinterface::C20_0
(000128F2) KERNEL32.DLL.BaseThreadInitThunk
(00064DE1) ntdll.dll
(00064DA9) ntdll.dll

(00840FC9) C5073_3
(008425A3) _ReThrowException
(00752961) TTerminal::Open
(006A8E58) TTerminalItem::ProcessEvent
(006A7334) TSignalThread::Execute
(00094477) Userinterface::C20_0
(00012

The problem happens rarely. I cannot reproduce it.

Reply with quote

rk@...
Guest

Invalid access to memory - _count234

<Try to describe precise steps that lead to the problem (where do you click, what keys do you press, what do you see, etc.)>
<If relevant, consider attaching a session log file or a screenshot)>

WinSCP 5.7.7

Error message:
Invalid access to memory.

Stack trace:
(0060C139) C2280_0
(007E08AA) C4799_0
(007E2912) ____ExceptionHandler
(007DF88C) __ExceptionHandler
(0008A61F) ntdll.dll
(00077E7A) ntdll.dll.KiUserExceptionDispatcher
(00609AC2) _count234
(00609FC7) _add234
(0060D7C0) _sk_register
(0060D891) _putty_sk_new
(005E349D) _new_connection
(005E86E2) C2232_0
(005F3FF8) _sshfwd_unthrottle
(006A3F4A) TSecureShell::Open
(0070D192) TTerminal::Open
(0067224C) TTerminalItem::ProcessEvent
(00670728) TSignalThread::Execute
(0008269F) Userinterface::C21_0
(000128F2) KERNEL32.DLL.BaseThreadInitThunk
(00064DE1) ntdll.dll
(00064DA9) ntdll.dll

(007E0F15) C4799_0
(007E24EF) _ReThrowException
(006A4107) TSecureShell::Open
(0070D192) TTerminal::Open
(0067224C) TTerminalItem::ProcessEvent
(00670728) TSignalThread::Execute
(0008269F) Userinterface::C21_0
(000128F2) KERNEL32.DLL.BaseThreadInitThunk
(00064DE1) ntdll.dll
(00064DA9) ntdll.dll

(007E0F15) C4799_0
(007E24EF) _ReThrowException
(0070D2BC) TTerminal::Open
(0067224C) TTerminalItem::ProcessEvent
(00670728) TSignalThread::Execute
(0008269F) Userinterface::C21_0
(000128F2) KERNEL32.DLL.BaseThreadInitThunk
(00064DE1) ntdll.dll
(00064DA9) ntdll.dll

(007E0F15) C4799_0
(007E24EF) _ReThrowException
(0070D6BE) TTerminal::Open
(0067224C) TTerminalItem::ProcessEvent
(00670728) TSignalThread::Execute
(0008269F) Userinterface::C21_0
(000128F2) KERNE

I know how to reproduce the problem or the problem happens frequently enough. I wish to be contacted by the WinSCP team to help resolving the problem.

Reply with quote

martin
Site Admin
martin avatar
Joined:
Posts:
31,744
Location:
Prague, Czechia

Re: Invalid access to memory - _count234

Thanks for your report.
I have sent you an email with a debug version of WinSCP to the address you have used to register on this forum.

Reply with quote

Advertisement

rocha@...
Guest

Acesso inválido à memória - _count234

I have added a file ( 450mb~ ) to queue download from server, so i added two more files 2k each, then count down starts and close connection after end, this not happen before.

WinSCP 5.9.2

Error message:
Acesso inválido à memória

Rastreamento de pilha:
(00649081) C2505_0
(00863846) C5073_3
(008658AE) ____ExceptionHandler
(00862668) __ExceptionHandler
(0008137F) ntdll.dll
(0006EF1A) ntdll.dll.KiUserExceptionDispatcher
(00646556) _count234
(00646A5B) _add234
(0064A7D4) _sk_addr_dup
(0064A8A5) _putty_sk_new
(0061674D) _new_connection
(0061C92B) _ssh_connshare_log
(0062920D) _sshfwd_x11_is_local
(006F6A7B) TSecureShell::Open
(007348FB) TSFTPFileSystem::Open
(0076F49F) TTerminal::Reopen
(00771079) TTerminal::QueryReopen
(0076B485) TRobustOperationLoop::TryReopen
(00775A5A) TTerminal::CustomReadDirectory
(00774FC9) TTerminal::ReadDirectory
(00774448) TTerminal::ReloadDirectory
(00653C98) TUnixDirView::ReloadDirectory
(00038037) TNonVisualDataModule::ExplorerActionsExecute
(003B4D08) System::Actions::TContainedActionList::ExecuteAction
(0019BE81) Vcl::Actnlist::TCustomAction::Execute
(00372BEC) System::Classes::_18201
(0002C271) USER32.dll
(0000D845) USER32.dll
(0000D19F) USER32.dll
(0000CF5B) USER32.dll.DispatchMessageW

(00863EB1) C5073_3
(0086548B) _ReThrowException
(006F6C38) TSecureShell::Open
(007348FB) TSFTPFileSystem::Open
(0076F49F) TTerminal::Reopen
(00771079) TTerminal::QueryReopen
(0076B485) TRobustOperationLoop::TryReopen
(00775A5A) TTerminal::CustomReadDirectory
(00774FC9) TTerminal::ReadDirectory
(00774448) TTerminal::ReloadDirectory
(00653C98) TUnixDirView::ReloadDirector

The problem happens rarely. I cannot reproduce it.

Reply with quote

j.danilczuk@...
Guest

Naruszenie ochrony pamęci - _count234

<Try to describe precise steps that lead to the problem (where do you click, what keys do you press, what do you see, etc.)>
<If relevant, consider attaching a session log file or a screenshot)>

WinSCP 5.9.2

Error message:
Naruszenie ochrony pamęci.

Stack trace:
(00649081) C2505_0
(00863846) C5073_3
(008658AE) ____ExceptionHandler
(00862668) __ExceptionHandler
(0008137F) ntdll.dll
(0006EF1A) ntdll.dll.KiUserExceptionDispatcher
(00646556) _count234
(00646A5B) _add234
(0064A7D4) _sk_addr_dup
(0064A8A5) _putty_sk_new
(0061674D) _new_connection
(0061C92B) _ssh_connshare_log
(0062920D) _sshfwd_x11_is_local
(006F6A7B) TSecureShell::Open
(0076D91E) TTerminal::Open
(006C3518) TTerminalItem::ProcessEvent
(006C19F4) TSignalThread::Execute
(000987A7) Userinterface::C20_0
(000152C2) KERNEL32.DLL.BaseThreadInitThunk
(0005F607) ntdll.dll
(0005F5CF) ntdll.dll

(00863EB1) C5073_3
(0086548B) _ReThrowException
(006F6C38) TSecureShell::Open
(0076D91E) TTerminal::Open
(006C3518) TTerminalItem::ProcessEvent
(006C19F4) TSignalThread::Execute
(000987A7) Userinterface::C20_0
(000152C2) KERNEL32.DLL.BaseThreadInitThunk
(0005F607) ntdll.dll
(0005F5CF) ntdll.dll

(00863EB1) C5073_3
(0086548B) _ReThrowException
(0076DAB3) TTerminal::Open
(006C3518) TTerminalItem::ProcessEvent
(006C19F4) TSignalThread::Execute
(000987A7) Userinterface::C20_0
(000152C2) KERNEL32.DLL.BaseThreadInitThunk
(0005F607) ntdll.dll
(0005F5CF) ntdll.dll

(00863EB1) C5073_3
(0086548B) _ReThrowException
(0076DF15) TTerminal::Open
(006C3518) TTerminalItem::ProcessEvent
(006C19F4) TSignalThread::Execute
(000987A7) Userinterface::C20_0
(0

The problem happens rarely. I cannot reproduce it.

Reply with quote

ralph.livock@...
Guest

Invalid access to memory - _count234

<Try to describe precise steps that lead to the problem (where do you click, what keys do you press, what do you see, etc.)>
<If relevant, consider attaching a session log file or a screenshot)>

I've never seen this before - all I did was select 9 files on a remote server (SFTP) to download to my local PC. I pressed the download button and almost immediately got the "Invalid access to memory error".

One of the rows in my queue is marked with a red X and says "Error", three others say "Query" which is unusual for me.

Other possibly useful things - I'd just started Windows from hibernation and it may not have finished starting up completely. Also, at the same time it's downloading Windows updates.

Cheers,
Ralph

WinSCP 5.9.2

Error message:
Invalid access to memory.

Stack trace:
(00649081) C2505_0
(00863846) C5073_3
(008658AE) ____ExceptionHandler
(00862668) __ExceptionHandler
(00062496) ntdll.dll
(0000F13E) ntdll.dll.KiUserExceptionDispatcher
(00646556) _count234
(00646A5B) _add234
(0064A7D4) _sk_addr_dup
(0064A8A5) _putty_sk_new
(0061674D) _new_connection
(0061C92B) _ssh_connshare_log
(0062920D) _sshfwd_x11_is_local
(006F6A7B) TSecureShell::Open
(0076D91E) TTerminal::Open
(006C3518) TTerminalItem::ProcessEvent
(006C19F4) TSignalThread::Execute
(000987A7) Userinterface::C20_0
(00012368) kernel32.dll.BaseThreadInitThunk
(00038900) ntdll.dll
(000388D0) ntdll.dll

(00863EB1) C5073_3
(0086548B) _ReThrowException
(006F6C38) TSecureShell::Open
(0076D91E) TTerminal::Open
(006C3518) TTerminalItem::ProcessEvent
(006C19F4) TSignalThread::Execute
(000987A7) Userinterface::C20_0
(00012368) kernel32.dll.BaseThreadInitThunk
(00038900) ntdll.dll
(000388D0) ntdll.dll

(00863EB1) C5073_3
(0086548B) _ReThrowException
(0076DAB3) TTerminal::Open
(006C3518) TTerminalItem::ProcessEvent
(006C19F4) TSignalThread::Execute
(000987A7) Userinterface::C20_0
(00012368) kernel32.dll.BaseThreadInitThunk
(00038900) ntdll.dll
(000388D0) ntdll.dll

(00863EB1) C5073_3
(0086548B) _ReThrowException
(0076DF15) TTerminal::Open
(006C3518) TTerminalItem::ProcessEvent
(006C19F4) TSignalThread::Execute
(000987A7) Userinterface::C20_0
(00012

The problem happens rarely. I cannot reproduce it.

Reply with quote

aderitor@...
Guest

Acesso à memória inválido - _count234

<Try to describe precise steps that lead to the problem (where do you click, what keys do you press, what do you see, etc.)>
<If relevant, consider attaching a session log file or a screenshot)>

WinSCP 5.9.2

Error message:
Acesso à memória inválido.

Stack trace:
(00649081) C2505_0
(00863846) C5073_3
(008658AE) ____ExceptionHandler
(00862668) __ExceptionHandler
(0007C53F) ntdll.dll
(00069D8A) ntdll.dll.KiUserExceptionDispatcher
(00646556) _count234
(00646A5B) _add234
(0064A7D4) _sk_addr_dup
(0064A8A5) _putty_sk_new
(0061674D) _new_connection
(0061C92B) _ssh_connshare_log
(0062920D) _sshfwd_x11_is_local
(006F6A7B) TSecureShell::Open
(0076D91E) TTerminal::Open
(006C6A1F) TTerminalThread::TerminalOpenEvent
(006C19F4) TSignalThread::Execute
(000987A7) Userinterface::C20_0
(00012742) KERNEL32.DLL.BaseThreadInitThunk
(00058E52) ntdll.dll
(00058E1A) ntdll.dll

(00863EB1) C5073_3
(0086548B) _ReThrowException
(006F6C38) TSecureShell::Open
(0076D91E) TTerminal::Open
(006C6A1F) TTerminalThread::TerminalOpenEvent
(006C19F4) TSignalThread::Execute
(000987A7) Userinterface::C20_0
(00012742) KERNEL32.DLL.BaseThreadInitThunk
(00058E52) ntdll.dll
(00058E1A) ntdll.dll

(00863EB1) C5073_3
(0086548B) _ReThrowException
(0076DAB3) TTerminal::Open
(006C6A1F) TTerminalThread::TerminalOpenEvent
(006C19F4) TSignalThread::Execute
(000987A7) Userinterface::C20_0
(00012742) KERNEL32.DLL.BaseThreadInitThunk
(00058E52) ntdll.dll
(00058E1A) ntdll.dll

(00863EB1) C5073_3
(0086548B) _ReThrowException
(0076DF15) TTerminal::Open
(006C6A1F) TTerminalThread::TerminalOpenEvent
(006C19F4) TSignalThread::Execute
(000987A7

The problem happens rarely. I cannot reproduce it.

Reply with quote

Advertisement

neolot@...
Guest

Ошибка доступа к памяти - _count234

<Try to describe precise steps that lead to the problem (where do you click, what keys do you press, what do you see, etc.)>
<If relevant, consider attaching a session log file or a screenshot)>

WinSCP 5.9.3

Error message:
Ошибка доступа к памяти.

Трассировка стека:
(00649E61) C2505_0
(00866422) C5073_3
(0086848A) ____ExceptionHandler
(00865244) __ExceptionHandler
(00081D3F) ntdll.dll
(0006F8EA) ntdll.dll.KiUserExceptionDispatcher
(00647336) _count234
(0064783B) _add234
(0064B5B4) _sk_addr_dup
(0064B685) _putty_sk_new
(0061752D) _new_connection
(0061D70B) _ssh_connshare_log
(00629FED) _sshfwd_x11_is_local
(006F8B3B) TSecureShell::Open
(0076FDE2) TTerminal::Open
(006C54E8) TTerminalItem::ProcessEvent
(006C39C4) TSignalThread::Execute
(00098AD3) Userinterface::C20_0
(000152C2) KERNEL32.DLL.BaseThreadInitThunk
(0005FFD7) ntdll.dll
(0005FF9F) ntdll.dll

(00866A8D) C5073_3
(00868067) _ReThrowException
(006F8CF8) TSecureShell::Open
(0076FDE2) TTerminal::Open
(006C54E8) TTerminalItem::ProcessEvent
(006C39C4) TSignalThread::Execute
(00098AD3) Userinterface::C20_0
(000152C2) KERNEL32.DLL.BaseThreadInitThunk
(0005FFD7) ntdll.dll
(0005FF9F) ntdll.dll

(00866A8D) C5073_3
(00868067) _ReThrowException
(0076FF77) TTerminal::Open
(006C54E8) TTerminalItem::ProcessEvent
(006C39C4) TSignalThread::Execute
(00098AD3) Userinterface::C20_0
(000152C2) KERNEL32.DLL.BaseThreadInitThunk
(0005FFD7) ntdll.dll
(0005FF9F) ntdll.dll

(00866A8D) C5073_3
(00868067) _ReThrowException
(007703D9)%

The problem happens rarely. I cannot reproduce it.

Reply with quote

aleksander.wisniewski@...
Guest

Naruszenie ochrony pamęci - _count234

<Try to describe precise steps that lead to the problem (where do you click, what keys do you press, what do you see, etc.)>
<If relevant, consider attaching a session log file or a screenshot)>

WinSCP 5.9.3

Error message:
Naruszenie ochrony pamęci.

Stack trace:
(00649E61) C2505_0
(00866422) C5073_3
(0086848A) ____ExceptionHandler
(00865244) __ExceptionHandler
(0008A61F) ntdll.dll
(00077E7A) ntdll.dll.KiUserExceptionDispatcher
(00647336) _count234
(0064783B) _add234
(0064B5B4) _sk_addr_dup
(0064B685) _putty_sk_new
(0061752D) _new_connection
(0061D70B) _ssh_connshare_log
(00629FED) _sshfwd_x11_is_local
(006F8B3B) TSecureShell::Open
(0076FDE2) TTerminal::Open
(006C89EF) TTerminalThread::TerminalOpenEvent
(006C39C4) TSignalThread::Execute
(00098AD3) Userinterface::C20_0
(000128F2) KERNEL32.DLL.BaseThreadInitThunk
(00064DE1) ntdll.dll
(00064DA9) ntdll.dll

(00866A8D) C5073_3
(00868067) _ReThrowException
(006F8CF8) TSecureShell::Open
(0076FDE2) TTerminal::Open
(006C89EF) TTerminalThread::TerminalOpenEvent
(006C39C4) TSignalThread::Execute
(00098AD3) Userinterface::C20_0
(000128F2) KERNEL32.DLL.BaseThreadInitThunk
(00064DE1) ntdll.dll
(00064DA9) ntdll.dll

(00866A8D) C5073_3
(00868067) _ReThrowException
(0076FF77) TTerminal::Open
(006C89EF) TTerminalThread::TerminalOpenEvent
(006C39C4) TSignalThread::Execute
(00098AD3) Userinterface::C20_0
(000128F2) KERNEL32.DLL.BaseThreadInitThunk
(00064DE1) ntdll.dll
(00064DA9) ntdll.dll

(00866A8D) C5073_3
(00868067) _ReThrowException
(007703D9) TTerminal::Open
(006C89EF) TTerminalThread::TerminalOpenEvent
(006C39C4) TSignalThread::Execute
(00098AD3) Userin

The problem happens rarely. I cannot reproduce it.

Reply with quote

hatenomore@...
Guest

Naruszenie ochrony pamęci - _count234

<Try to describe precise steps that lead to the problem (where do you click, what keys do you press, what do you see, etc.)>
<If relevant, consider attaching a session log file or a screenshot)>

WinSCP 5.9.3

Error message:
Naruszenie ochrony pamęci.

Stack trace:
(00649E61) C2505_0
(00866422) C5073_3
(0086848A) ____ExceptionHandler
(00865244) __ExceptionHandler
(0003EE3E) ntdll.dll.ZwWow64CallFunction64
(0003F5BA) ntdll.dll.KiUserExceptionDispatcher
(00647336) _count234
(0064783B) _add234
(0064B5B4) _sk_addr_dup
(0064B685) _putty_sk_new
(0061752D) _new_connection
(0061D70B) _ssh_connshare_log
(00629FED) _sshfwd_x11_is_local
(006F8B3B) TSecureShell::Open
(00736A9B) TSFTPFileSystem::Open
(00771963) TTerminal::Reopen
(006C89FD) TTerminalThread::TerminalReopenEvent
(006C39C4) TSignalThread::Execute
(00098AD3) Userinterface::C20_0
(00016C02) KERNEL32.DLL.BaseThreadInitThunk
(00059B8D) ntdll.dll
(00059B55) ntdll.dll

(00866A8D) C5073_3
(00868067) _ReThrowException
(006F8CF8) TSecureShell::Open
(00736A9B) TSFTPFileSystem::Open
(00771963) TTerminal::Reopen
(006C89FD) TTerminalThread::TerminalReopenEvent
(006C39C4) TSignalThread::Execute
(00098AD3) Userinterface::C20_0
(00016C02) KERNEL32.DLL.BaseThreadInitThunk
(00059B8D) ntdll.dll
(00059B55) ntdll.dll

(00866A8D) C5073_3
(00868067) _ReThrowException
(007703D9) TTerminal::Open
(00771963) TTerminal::Reopen
(006C89FD) TTerminalThread::TerminalReopenEvent
(006C39C4) TSignalThread::Execute
(00098AD3) Userinterface::C20_0
(00016C02) KERNEL32.DLL.BaseThreadInitThunk
(00059B8D) ntdll.dll
(00059B55) ntdll.dll[color=red][/color][size=9][/size]

The problem happens rarely. I cannot reproduce it.

Reply with quote

maldonado.luis@...
Guest

Acceso a memoria no válido - _count234

<Try to describe precise steps that lead to the problem (where do you click, what keys do you press, what do you see, etc.)>
<If relevant, consider attaching a session log file or a screenshot)>

WinSCP 5.9.3

Error message:
Acceso a memoria no válido

Traza de la pila:
(00649E61) C2505_0
(00866422) C5073_3
(0086848A) ____ExceptionHandler
(00865244) __ExceptionHandler
(0003EE3E) ntdll.dll.ZwWow64CallFunction64
(0003F5BA) ntdll.dll.KiUserExceptionDispatcher
(00647336) _count234
(0064783B) _add234
(0064B5B4) _sk_addr_dup
(0064B685) _putty_sk_new
(0061752D) _new_connection
(0061D70B) _ssh_connshare_log
(00629FED) _sshfwd_x11_is_local
(006F8B3B) TSecureShell::Open
(0076FDE2) TTerminal::Open
(006C54E8) TTerminalItem::ProcessEvent
(006C39C4) TSignalThread::Execute
(00098AD3) Userinterface::C20_0
(00016C02) KERNEL32.DLL.BaseThreadInitThunk
(00059B8D) ntdll.dll
(00059B55) ntdll.dll

(00866A8D) C5073_3
(00868067) _ReThrowException
(006F8CF8) TSecureShell::Open
(0076FDE2) TTerminal::Open
(006C54E8) TTerminalItem::ProcessEvent
(006C39C4) TSignalThread::Execute
(00098AD3) Userinterface::C20_0
(00016C02) KERNEL32.DLL.BaseThreadInitThunk
(00059B8D) ntdll.dll
(00059B55) ntdll.dll

(00866A8D) C5073_3
(00868067) _ReThrowException
(0076FF77) TTerminal::Open
(006C54E8) TTerminalItem::ProcessEvent
(006C39C4) TSignalThread::Execute
(00098AD3) Userinterface::C20_0
(00016C02) KERNEL32.DLL.BaseThreadInitThunk
(00059B8D) ntdll.dll
(00059B55) ntdll.dll

(00866A8D) C5073_3
(00868067) _ReThrowException
(007703D9) TTerminal::Open
(006C54E8) TTerminalItem::ProcessEvent
(006C39C4) TSignalThread::Execute
(00098AD3)%2

The problem happens rarely. I cannot reproduce it.

Reply with quote

Advertisement

maldonado.luis@...
Guest

Acceso a memoria no válido - _count234

<Try to describe precise steps that lead to the problem (where do you click, what keys do you press, what do you see, etc.)>
<If relevant, consider attaching a session log file or a screenshot)>

WinSCP 5.9.3

Error message:
Acceso a memoria no válido

Traza de la pila:
(00649E61) C2505_0
(00866422) C5073_3
(0086848A) ____ExceptionHandler
(00865244) __ExceptionHandler
(0003EE3E) ntdll.dll.ZwWow64CallFunction64
(0003F5BA) ntdll.dll.KiUserExceptionDispatcher
(00647336) _count234
(0064783B) _add234
(0064B5B4) _sk_addr_dup
(0064B685) _putty_sk_new
(0061752D) _new_connection
(0061D70B) _ssh_connshare_log
(00629FED) _sshfwd_x11_is_local
(006F8B3B) TSecureShell::Open
(00736A9B) TSFTPFileSystem::Open
(00771963) TTerminal::Reopen
(0077353D) TTerminal::QueryReopen
(0076D949) TRobustOperationLoop::TryReopen
(00777F1E) TTerminal::CustomReadDirectory
(0077748D) TTerminal::ReadDirectory
(0077690C) TTerminal::ReloadDirectory
(00654A78) TUnixDirView::ReloadDirectory
(00016DD4) TCustomScpExplorerForm::Idle
(0003CF87) TNonVisualDataModule::DoIdle
(0003CF44) TNonVisualDataModule::SessionIdleTimerTimer
(00373100) System::Classes::_18201
(00007E6F) USER32.DLL.CallNextHookEx
(000080CC) USER32.DLL
(0000966A) USER32.DLL
(000096DB) USER32.DLL.DispatchMessageW

(00866A8D) C5073_3
(00868067) _ReThrowException
(006F8CF8) TSecureShell::Open
(00736A9B) TSFTPFileSystem::Open
(00771963) TTerminal::Reopen
(0077353D) TTerminal::QueryReopen
(0076D949) TRobustOperationLoop::TryReopen
(00777F1E) TTerminal::CustomReadDirectory
(0077748D) TTerminal::ReadDirectory
(0077690C) TTerminal::ReloadDirectory
(00654A78) TUnixDirView::ReloadDirectory
(00016DD4)%2

The problem happens rarely. I cannot reproduce it.

Reply with quote

caglar.celik@...
Guest

Invalid access to memory - _count234

I was downloading log files from an SFTP server, then my VPN disconnected and I got this error.

WinSCP 5.9.3

Error message:
Invalid access to memory.

Stack trace:
(00649E61) C2505_0
(00866422) C5073_3
(0086848A) ____ExceptionHandler
(00865244) __ExceptionHandler
(00081D3F) ntdll.dll
(0006F8EA) ntdll.dll.KiUserExceptionDispatcher
(00647336) _count234
(0064783B) _add234
(0064B5B4) _sk_addr_dup
(0064B685) _putty_sk_new
(0061752D) _new_connection
(0061D70B) _ssh_connshare_log
(00629FED) _sshfwd_x11_is_local
(006F8B3B) TSecureShell::Open
(00736A9B) TSFTPFileSystem::Open
(00771963) TTerminal::Reopen
(006C89FD) TTerminalThread::TerminalReopenEvent
(006C39C4) TSignalThread::Execute
(00098AD3) Userinterface::C20_0
(000152C2) KERNEL32.DLL.BaseThreadInitThunk
(0005FFD7) ntdll.dll
(0005FF9F) ntdll.dll

(00866A8D) C5073_3
(00868067) _ReThrowException
(006F8CF8) TSecureShell::Open
(00736A9B) TSFTPFileSystem::Open
(00771963) TTerminal::Reopen
(006C89FD) TTerminalThread::TerminalReopenEvent
(006C39C4) TSignalThread::Execute
(00098AD3) Userinterface::C20_0
(000152C2) KERNEL32.DLL.BaseThreadInitThunk
(0005FFD7) ntdll.dll
(0005FF9F) ntdll.dll

(00866A8D) C5073_3
(00868067) _ReThrowException
(007703D9) TTerminal::Open
(00771963) TTerminal::Reopen
(006C89FD) TTerminalThread::TerminalReopenEvent
(006C39C4) TSignalThread::Execute
(00098AD3) Userinterface::C20_0
(000152C2) KERNEL32.DLL.BaseThreadInitThunk
(0005FFD7) ntdll.dll
(0005FF9F) ntdll.dll

The problem happens rarely. I cannot reproduce it.

Reply with quote

ysu@...
Guest

Invalid access to memory - _count234

I was copying a number of directories to a server, just hitting F5 in quick succession.

WinSCP 5.9.4

Error message:
Invalid access to memory.

Stack trace:
(0064A0B1) C2505_0
(00866B5E) C5073_0
(00868BC6) ____ExceptionHandler
(00865980) __ExceptionHandler
(000624F6) ntdll.dll
(0000F13E) ntdll.dll.KiUserExceptionDispatcher
(00647586) _count234
(00647A8B) _add234
(0064B804) _sk_addr_dup
(0064B8D5) _putty_sk_new
(0061777D) _new_connection
(0061D95B) _ssh_connshare_log
(0062A23D) _sshfwd_x11_is_local
(006F8D8B) TSecureShell::Open
(0076FF7A) TTerminal::Open
(006C5738) TTerminalItem::ProcessEvent
(006C3C14) TSignalThread::Execute
(00098B63) Userinterface::C20_0
(00012368) kernel32.dll.BaseThreadInitThunk
(00038900) ntdll.dll
(000388D0) ntdll.dll

(008671C9) C5073_0
(008687A3) _ReThrowException
(006F8F48) TSecureShell::Open
(0076FF7A) TTerminal::Open
(006C5738) TTerminalItem::ProcessEvent
(006C3C14) TSignalThread::Execute
(00098B63) Userinterface::C20_0
(00012368) kernel32.dll.BaseThreadInitThunk
(00038900) ntdll.dll
(000388D0) ntdll.dll

(008671C9) C5073_0
(008687A3) _ReThrowException
(0077010F) TTerminal::Open
(006C5738) TTerminalItem::ProcessEvent
(006C3C14) TSignalThread::Execute
(00098B63) Userinterface::C20_0
(00012368) kernel32.dll.BaseThreadInitThunk
(00038900) ntdll.dll
(000388D0) ntdll.dll

(008671C9) C5073_0
(008687A3) _ReThrowException
(0077066D) TTerminal::Open
(006C5738) TTerminalItem::ProcessEvent
(006C3C14) TSignalThread::Execute
(00098B63) Userinterface::C20_0
(00012

The problem happens rarely. I cannot reproduce it.

Reply with quote

ngocanh08431@...
Guest

メモリのアクセス違反 - _count234

WinSCP 5.9.4

Error message:
メモリのアクセス違反

スタック トレース:
(0064A0B1) C2505_0
(00866B5E) C5073_0
(00868BC6) ____ExceptionHandler
(00865980) __ExceptionHandler
(00081D3F) ntdll.dll
(0006F8EA) ntdll.dll.KiUserExceptionDispatcher
(00647586) _count234
(00647A8B) _add234
(0064B804) _sk_addr_dup
(0064B8D5) _putty_sk_new
(0061777D) _new_connection
(0061D95B) _ssh_connshare_log
(0062A23D) _sshfwd_x11_is_local
(006F8D8B) TSecureShell::Open
(007715DA) TTerminal::OpenTunnel
(0076FB92) TTerminal::Open
(006C8C3F) TTerminalThread::TerminalOpenEvent
(006C3C14) TSignalThread::Execute
(00098B63) Userinterface::C20_0
(000152C2) KERNEL32.DLL.BaseThreadInitThunk
(0005FFD7) ntdll.dll
(0005FF9F) ntdll.dll

(008671C9) C5073_0
(008687A3) _ReThrowException
(006F8F48) TSecureShell::Open
(007715DA) TTerminal::OpenTunnel
(0076FB92) TTerminal::Open
(006C8C3F) TTerminalThread::TerminalOpenEvent
(006C3C14) TSignalThread::Execute
(00098B63) Userinterface::C20_0
(000152C2) KERNEL32.DLL.BaseThreadInitThunk
(0005FFD7) ntdll.dll
(0005FF9F) ntdll.dll

(008671C9) C5073_0
(008687A3) _ReThrowException
(00771678) TTerminal::OpenTunnel
(0076FB92) TTerminal::Open
(006C8C3F) TTerminalThread::TerminalOpenEvent
(006C3C14) TSignalThread::Execute
(00098B63) Userinterface::C20_0
(000152C2) KERNEL32.DLL.BaseThreadInitThunk
(0005FFD7) ntdll.dll
(0005FF9F) nt

The problem happens rarely. I cannot reproduce it.

Reply with quote

Advertisement

dclark16@...
Guest

Invalid access to memory - _count234

I changed the option in Options -> Preferences -> Transfer -> Background -> Transfer each file individually on background by default and received the error every time it tries to spawn another thread to start the file transfer. If I un-tick it, everything works as expected.

WinSCP 5.9.5

Error message:
Invalid access to memory.

Stack trace:
(0064A3D1) C2505_0
(0086700E) C5073_3
(00869076) ____ExceptionHandler
(00865E30) __ExceptionHandler
(000624F6) ntdll.dll
(0000F13E) ntdll.dll.KiUserExceptionDispatcher
(00647812) _count234
(00647D17) _add234
(0064BC38) _sk_addr_dup
(0064BD39) _putty_sk_new
(00617915) _new_connection
(0061DAF3) _ssh_connshare_log
(0062A495) _sshfwd_x11_is_local
(006F936B) TSecureShell::Open
(0077055A) TTerminal::Open
(006C5CF8) TTerminalItem::ProcessEvent
(006C41D4) TSignalThread::Execute
(00098BA3) Userinterface::C20_0
(00012368) kernel32.dll.BaseThreadInitThunk
(00038900) ntdll.dll
(000388D0) ntdll.dll

(00867679) C5073_3
(00868C53) _ReThrowException
(006F9528) TSecureShell::Open
(0077055A) TTerminal::Open
(006C5CF8) TTerminalItem::ProcessEvent
(006C41D4) TSignalThread::Execute
(00098BA3) Userinterface::C20_0
(00012368) kernel32.dll.BaseThreadInitThunk
(00038900) ntdll.dll
(000388D0) ntdll.dll

(00867679) C5073_3
(00868C53) _ReThrowException
(007706EF) TTerminal::Open
(006C5CF8) TTerminalItem::ProcessEvent
(006C41D4) TSignalThread::Execute
(00098BA3) Userinterface::C20_0
(00012368) kernel32.dll.BaseThreadInitThunk
(00038900) ntdll.dll
(000388D0) ntdll.dll

(00867679) C5073_3
(00868C53) _ReThrowException
(00770C4D) TTerminal::Open
(006C5CF8) TTerminalItem::ProcessEvent
(006C41D4) TSignalThread::Execute
(00098BA3) Userinterface::C20_0
(00012

I know how to reproduce the problem or the problem happens frequently enough. I wish to be contacted by the WinSCP team to help resolving the problem.

Reply with quote

martin
Site Admin
martin avatar
Joined:
Posts:
31,744
Location:
Prague, Czechia

Re: Invalid access to memory - _count234

Thanks for your report.
I have sent you an email with a debug version of WinSCP to the address you have used to register on this forum.

Reply with quote

no@...
Guest

Ошибка доступа к памяти - _count234

<Try to describe precise steps that lead to the problem (where do you click, what keys do you press, what do you see, etc.)>
<If relevant, consider attaching a session log file or a screenshot)>

WinSCP 5.9.5

Error message:
Ошибка доступа к памяти.

Трассировка стека:
(0064A3D1) C2505_0
(0086700E) C5073_3
(00869076) ____ExceptionHandler
(00865E30) __ExceptionHandler
(0008519F) ntdll.dll
(000731B1) ntdll.dll.KiUserExceptionDispatcher
(00647812) _count234
(00647D17) _add234
(0064BC38) _sk_addr_dup
(0064BD39) _putty_sk_new
(00617915) _new_connection
(0061DAF3) _ssh_connshare_log
(0062A495) _sshfwd_x11_is_local
(006F936B) TSecureShell::Open
(0077055A) TTerminal::Open
(006C5CF8) TTerminalItem::ProcessEvent
(006C41D4) TSignalThread::Execute
(00098BA3) Userinterface::C20_0
(00017742) KERNEL32.DLL.BaseThreadInitThunk
(0006487B) ntdll.dll.RtlGetAppContainerNamedObjectPath
(00064848) ntdll.dll.RtlGetAppContainerNamedObjectPath

(00867679) C5073_3
(00868C53) _ReThrowException
(006F9528) TSecureShell::Open
(0077055A) TTerminal::Open
(006C5CF8) TTerminalItem::ProcessEvent
(006C41D4) TSignalThread::Execute
(00098BA3) Userinterface::C20_0
(00017742) KERNEL32.DLL.BaseThreadInitThunk
(0006487B) ntdll.dll.RtlGetAppContainerNamedObjectPath
(00064848) ntdll.dll.RtlGetAppContainerNamedObjectPath

(00867679) C5073_3
(00868C53) _ReThrowException
(007706EF) TTerminal::Open
(006C5CF8) TTerminalItem::ProcessEvent
(006C41D4) TSignalThread::Execute
(00098BA3) Userinterface::C20_0
(00017742) KERNEL32.DLL.BaseThreadInitThunk
(0006487B) nt

The problem happens rarely. I cannot reproduce it.

Reply with quote

emeszenes@...
Guest

Naruszenie ochrony pamęci - _count234

<Try to describe precise steps that lead to the problem (where do you click, what keys do you press, what do you see, etc.)>
<If relevant, consider attaching a session log file or a screenshot)>

WinSCP 5.9.5

Error message:
Naruszenie ochrony pamęci.

Stack trace:
(0064A3D1)
(0086700E)
(00869076)
(00865E30)
(00081D3F) ntdll.dll
(0006F8EA) ntdll.dll.KiUserExceptionDispatcher
(00647812)
(00647D17)
(0064BC38)
(0064BD39)
(00617915)
(0061DAF3)
(0062A495)
(006F936B)
(0077055A)
(006C5CF8)
(006C41D4)
(00098BA3)
(000152C2) KERNEL32.DLL.BaseThreadInitThunk
(0005FFD7) ntdll.dll
(0005FF9F) ntdll.dll

(00867679)
(00868C53)
(006F9528)
(0077055A)
(006C5CF8)
(006C41D4)
(00098BA3)
(000152C2) KERNEL32.DLL.BaseThreadInitThunk
(0005FFD7) ntdll.dll
(0005FF9F) ntdll.dll

(00867679)
(00868C53)
(007706EF)
(006C5CF8)
(006C41D4)
(00098BA3)
(000152C2) KERNEL32.DLL.BaseThreadInitThunk
(0005FFD7) ntdll.dll
(0005FF9F) ntdll.dll

(00867679)
(00868C53)
(00770C4D)
(006C5CF8)
(006C41D4)
(00098BA3)
(000152C2) KERNEL32.DLL.BaseThreadInitThunk
(0005FFD7) ntdll.dll
(0005FF9F) ntdll.dll

I know how to reproduce the problem or the problem happens frequently enough. I wish to be contacted by the WinSCP team to help resolving the problem.

Reply with quote

Advertisement

martin
Site Admin
martin avatar
Joined:
Posts:
31,744
Location:
Prague, Czechia

Re: Naruszenie ochrony pamęci - _count234

Thanks for your report.
I have sent you an email with a debug version of WinSCP to the address you have used to register on this forum.

Reply with quote

allisonc@...
Guest

Invalid access to memory - _count234

Transferring files from /var/log/apache2 to network drive

WinSCP 5.9.5

Error message:
Invalid access to memory.

Stack trace:
(0064A3D1) C2505_0
(0086700E) C5073_3
(00869076) ____ExceptionHandler
(00865E30) __ExceptionHandler
(000624F6) ntdll.dll
(0000F13E) ntdll.dll.KiUserExceptionDispatcher
(00647812) _count234
(00647D17) _add234
(0064BC38) _sk_addr_dup
(0064BD39) _putty_sk_new
(00617915) _new_connection
(0061DAF3) _ssh_connshare_log
(0062A495) _sshfwd_x11_is_local
(006F936B) TSecureShell::Open
(0077055A) TTerminal::Open
(006C5CF8) TTerminalItem::ProcessEvent
(006C41D4) TSignalThread::Execute
(00098BA3) Userinterface::C20_0
(00012368) kernel32.dll.BaseThreadInitThunk
(00038900) ntdll.dll
(000388D0) ntdll.dll

(00867679) C5073_3
(00868C53) _ReThrowException
(006F9528) TSecureShell::Open
(0077055A) TTerminal::Open
(006C5CF8) TTerminalItem::ProcessEvent
(006C41D4) TSignalThread::Execute
(00098BA3) Userinterface::C20_0
(00012368) kernel32.dll.BaseThreadInitThunk
(00038900) ntdll.dll
(000388D0) ntdll.dll

(00867679) C5073_3
(00868C53) _ReThrowException
(007706EF) TTerminal::Open
(006C5CF8) TTerminalItem::ProcessEvent
(006C41D4) TSignalThread::Execute
(00098BA3) Userinterface::C20_0
(00012368) kernel32.dll.BaseThreadInitThunk
(00038900) ntdll.dll
(000388D0) ntdll.dll

(00867679) C5073_3
(00868C53) _ReThrowException
(00770C4D) TTerminal::Open
(006C5CF8) TTerminalItem::ProcessEvent
(006C41D4) TSignalThread::Execute
(00098BA3) Userinterface::C20_0
(00012

The problem happens rarely. I cannot reproduce it.

Reply with quote

ghumphrey@...
Guest

Invalid access to memory - _count234

<Try to describe precise steps that lead to the problem (where do you click, what keys do you press, what do you see, etc.)>
<If relevant, consider attaching a session log file or a screenshot)>

WinSCP 5.9.6

Error message:
Invalid access to memory.

Stack trace:
(0064BA05) C2507_0
(008689AA) C5077_0
(0086AA12) ____ExceptionHandler
(008677CC) __ExceptionHandler
(0008519F) ntdll.dll
(000731B1) ntdll.dll.KiUserExceptionDispatcher
(00648D12) _count234
(00649217) _add234
(0064D29D) _sk_addr_dup
(0064D39D) _putty_sk_new
(00618CF9) _new_connection
(0061EEC7) _ssh_connshare_log
(0062B869) _sshfwd_x11_is_local
(006FAA1B) TSecureShell::Open
(00771C0A) TTerminal::Open
(006C739C) TTerminalItem::ProcessEvent
(006C5878) TSignalThread::Execute
(00098E9B) Userinterface::C20_0
(00017742) KERNEL32.DLL.BaseThreadInitThunk
(0006487B) ntdll.dll.RtlGetAppContainerNamedObjectPath
(00064848) ntdll.dll.RtlGetAppContainerNamedObjectPath

(00869015) C5077_0
(0086A5EF) _ReThrowException
(006FABD8) TSecureShell::Open
(00771C0A) TTerminal::Open
(006C739C) TTerminalItem::ProcessEvent
(006C5878) TSignalThread::Execute
(00098E9B) Userinterface::C20_0
(00017742) KERNEL32.DLL.BaseThreadInitThunk
(0006487B) ntdll.dll.RtlGetAppContainerNamedObjectPath
(00064848) ntdll.dll.RtlGetAppContainerNamedObjectPath

(00869015) C5077_0
(0086A5EF) _ReThrowException
(00771D9F) TTerminal::Open
(006C739C) TTerminalItem::ProcessEvent
(006C5878) TSignalThread::Execute
(00098E9B) Userinterface::C20_0
(00017742) KERNEL32.DLL.BaseThreadInitThunk
(0006487B) ntdll.dll.RtlGetAppContainerNamedObjectPath
(00064848) ntdll.dll.RtlGetAppContainerNamedObjectPath

(00869015) C5077_0
(0086A5EF) _ReThrowException%0

The problem happens rarely. I cannot reproduce it.

Reply with quote

dmatthews@...
Guest

Invalid access to memory - _count234

<Try to describe precise steps that lead to the problem (where do you click, what keys do you press, what do you see, etc.)>
<If relevant, consider attaching a session log file or a screenshot)>

WinSCP 5.9.6

Error message:
Invalid access to memory.

Stack trace:
(0064BA05) C2507_0
(008689AA) C5077_0
(0086AA12) ____ExceptionHandler
(008677CC) __ExceptionHandler
(000624F6) ntdll.dll
(0000F13E) ntdll.dll.KiUserExceptionDispatcher
(00648D12) _count234
(00649217) _add234
(0064D29D) _sk_addr_dup
(0064D39D) _putty_sk_new
(00618CF9) _new_connection
(0061EEC7) _ssh_connshare_log
(0062B869) _sshfwd_x11_is_local
(006FAA1B) TSecureShell::Open
(00771C0A) TTerminal::Open
(006C739C) TTerminalItem::ProcessEvent
(006C5878) TSignalThread::Execute
(00098E9B) Userinterface::C20_0
(00012368) kernel32.dll.BaseThreadInitThunk
(00038900) ntdll.dll
(000388D0) ntdll.dll

(00869015) C5077_0
(0086A5EF) _ReThrowException
(006FABD8) TSecureShell::Open
(00771C0A) TTerminal::Open
(006C739C) TTerminalItem::ProcessEvent
(006C5878) TSignalThread::Execute
(00098E9B) Userinterface::C20_0
(00012368) kernel32.dll.BaseThreadInitThunk
(00038900) ntdll.dll
(000388D0) ntdll.dll

(00869015) C5077_0
(0086A5EF) _ReThrowException
(00771D9F) TTerminal::Open
(006C739C) TTerminalItem::ProcessEvent
(006C5878) TSignalThread::Execute
(00098E9B) Userinterface::C20_0
(00012368) kernel32.dll.BaseThreadInitThunk
(00038900) ntdll.dll
(000388D0) ntdll.dll

(00869015) C5077_0
(0086A5EF) _ReThrowException
(007722FD) TTerminal::Open
(006C739C) TTerminalItem::ProcessEvent
(006C5878) TSignalThread::Execute
(00098E9B) Userinterface::C20_0
(00012

The problem happens rarely. I cannot reproduce it.

Reply with quote

Advertisement

johnny_vaz@...
Guest

Invalid access to memory - _count234

<Try to describe precise steps that lead to the problem (where do you click, what keys do you press, what do you see, etc.)>
<If relevant, consider attaching a session log file or a screenshot)>

WinSCP 5.9.5

Error message:
Invalid access to memory.

Stack trace:
(0064A3D1) C2505_0
(0086700E) C5073_3
(00869076) ____ExceptionHandler
(00865E30) __ExceptionHandler
(000420BE) ntdll.dll.RtlRaiseStatus
(00041F26) ntdll.dll.KiUserExceptionDispatcher
(00647812) _count234
(00647D17) _add234
(0064BC38) _sk_addr_dup
(0064BD39) _putty_sk_new
(00617915) _new_connection
(0061DAF3) _ssh_connshare_log
(0062A495) _sshfwd_x11_is_local
(006F936B) TSecureShell::Open
(007372CB) TSFTPFileSystem::Open
(007721D7) TTerminal::Reopen
(006C920D) TTerminalThread::TerminalReopenEvent
(006C41D4) TSignalThread::Execute
(00098BA3) Userinterface::C20_0
(00027541) KERNEL32.DLL.BaseThreadInitThunk
(00059C67) ntdll.dll
(00059C37) ntdll.dll

(00867679) C5073_3
(00868C53) _ReThrowException
(006F9528) TSecureShell::Open
(007372CB) TSFTPFileSystem::Open
(007721D7) TTerminal::Reopen
(006C920D) TTerminalThread::TerminalReopenEvent
(006C41D4) TSignalThread::Execute
(00098BA3) Userinterface::C20_0
(00027541) KERNEL32.DLL.BaseThreadInitThunk
(00059C67) ntdll.dll
(00059C37) ntdll.dll

(00867679) C5073_3
(00868C53) _ReThrowException
(00770C4D) TTerminal::Open
(007721D7) TTerminal::Reopen
(006C920D) TTerminalThread::TerminalReopenEvent
(006C41D4) TSignalThread::Execute
(00098BA3) Userinterface::C20_0
(00027541) KERNEL32.DLL.BaseThreadInitThunk
(00059C67) ntdll.dll
(00059C37) ntdll.dll

The problem happens rarely. I cannot reproduce it.

Reply with quote

jeremy.russell@...
Guest

Invalid access to memory - _count234

I was performing a simple transfer from DOS to Linux and got this:



WinSCP 5.11.1

Error message:
Invalid access to memory.

Stack trace:
(0066240D) C2507_0
(0089C862) C5067_0
(0089E8CA) ____ExceptionHandler
(0089B684) __ExceptionHandler
(000624F6) ntdll.dll
(0000F13E) ntdll.dll.KiUserExceptionDispatcher
(0065F716) _count234
(0065FC1B) _add234
(00663CA9) _sk_addr_dup
(00663DA9) _putty_sk_new
(0062F605) _new_connection
(006357D3) _ssh_connshare_log
(0064226D) _sshfwd_x11_is_local
(00714777) TSecureShell::Open
(0079627A) TTerminal::Open
(006E2907) TTerminalThread::TerminalOpenEvent
(006DDA70) TSignalThread::Execute
(000A0CE3) Userinterface::C20_0
(00012368) kernel32.dll.BaseThreadInitThunk
(00038900) ntdll.dll
(000388D0) ntdll.dll

(0089CECD) C5067_0
(0089E4A7) _ReThrowException
(00714934) TSecureShell::Open
(0079627A) TTerminal::Open
(006E2907) TTerminalThread::TerminalOpenEvent
(006DDA70) TSignalThread::Execute
(000A0CE3) Userinterface::C20_0
(00012368) kernel32.dll.BaseThreadInitThunk
(00038900) ntdll.dll
(000388D0) ntdll.dll

(0089CECD) C5067_0
(0089E4A7) _ReThrowException
(0079640F) TTerminal::Open
(006E2907) TTerminalThread::TerminalOpenEvent
(006DDA70) TSignalThread::Execute
(000A0CE3) Userinterface::C20_0
(00012368) kernel32.dll.BaseThreadInitThunk
(00038900) ntdll.dll
(000388D0) ntdll.dll

(0089CECD) C5067_0
(0089E4A7) _ReThrowException
(0079696D) TTerminal::Open
(006E2907) TTerminalThread::TerminalOpenEvent
(006DDA70) TSignalThread::Execute
(000A0CE3) Userinter[img][/img]

The problem happens rarely. I cannot reproduce it.

Reply with quote

jeremy.russell@...
Guest

Invalid access to memory - _count234

I was performing a simple transfer from DOS to Linux and got this:



WinSCP 5.11.1

Error message:
Invalid access to memory.

Stack trace:
(0066240D) C2507_0
(0089C862) C5067_0
(0089E8CA) ____ExceptionHandler
(0089B684) __ExceptionHandler
(000624F6) ntdll.dll
(0000F13E) ntdll.dll.KiUserExceptionDispatcher
(0065F716) _count234
(0065FC1B) _add234
(00663CA9) _sk_addr_dup
(00663DA9) _putty_sk_new
(0062F605) _new_connection
(006357D3) _ssh_connshare_log
(0064226D) _sshfwd_x11_is_local
(00714777) TSecureShell::Open
(0079627A) TTerminal::Open
(006E2907) TTerminalThread::TerminalOpenEvent
(006DDA70) TSignalThread::Execute
(000A0CE3) Userinterface::C20_0
(00012368) kernel32.dll.BaseThreadInitThunk
(00038900) ntdll.dll
(000388D0) ntdll.dll

(0089CECD) C5067_0
(0089E4A7) _ReThrowException
(00714934) TSecureShell::Open
(0079627A) TTerminal::Open
(006E2907) TTerminalThread::TerminalOpenEvent
(006DDA70) TSignalThread::Execute
(000A0CE3) Userinterface::C20_0
(00012368) kernel32.dll.BaseThreadInitThunk
(00038900) ntdll.dll
(000388D0) ntdll.dll

(0089CECD) C5067_0
(0089E4A7) _ReThrowException
(0079640F) TTerminal::Open
(006E2907) TTerminalThread::TerminalOpenEvent
(006DDA70) TSignalThread::Execute
(000A0CE3) Userinterface::C20_0
(00012368) kernel32.dll.BaseThreadInitThunk
(00038900) ntdll.dll
(000388D0) ntdll.dll

(0089CECD) C5067_0
(0089E4A7) _ReThrowException
(0079696D) TTerminal::Open
(006E2907) TTerminalThread::TerminalOpenEvent
(006DDA70) TSignalThread::Execute
(000A0CE3) Userinter[img][/img]

The problem happens rarely. I cannot reproduce it.

Reply with quote

smietniczek@...
Guest

Naruszenie ochrony pamęci - _count234

<Try to describe precise steps that lead to the problem (where do you click, what keys do you press, what do you see, etc.)>
<If relevant, consider attaching a session log file or a screenshot)>

WinSCP 5.9.4

Error message:
Naruszenie ochrony pamęci.

Stack trace:
(0064A0B1) C2505_0
(00866B5E) C5073_0
(00868BC6) ____ExceptionHandler
(00865980) __ExceptionHandler
(00081CFF) ntdll.dll
(0006F87A) ntdll.dll.KiUserExceptionDispatcher
(00647586) _count234
(00647A8B) _add234
(0064B804) _sk_addr_dup
(0064B8D5) _putty_sk_new
(0061777D) _new_connection
(0061D95B) _ssh_connshare_log
(0062A23D) _sshfwd_x11_is_local
(006F8D8B) TSecureShell::Open
(0076FF7A) TTerminal::Open
(006C5738) TTerminalItem::ProcessEvent
(006C3C14) TSignalThread::Execute
(00098B63) Userinterface::C20_0
(000152C2) KERNEL32.DLL.BaseThreadInitThunk
(0005FF67) ntdll.dll
(0005FF2F) ntdll.dll

(008671C9) C5073_0
(008687A3) _ReThrowException
(006F8F48) TSecureShell::Open
(0076FF7A) TTerminal::Open
(006C5738) TTerminalItem::ProcessEvent
(006C3C14) TSignalThread::Execute
(00098B63) Userinterface::C20_0
(000152C2) KERNEL32.DLL.BaseThreadInitThunk
(0005FF67) ntdll.dll
(0005FF2F) ntdll.dll

(008671C9) C5073_0
(008687A3) _ReThrowException
(0077010F) TTerminal::Open
(006C5738) TTerminalItem::ProcessEvent
(006C3C14) TSignalThread::Execute
(00098B63) Userinterface::C20_0
(000152C2) KERNEL32.DLL.BaseThreadInitThunk
(0005FF67) ntdll.dll
(0005FF2F) ntdll.dll

(008671C9) C5073_0
(008687A3) _ReThrowException
(0077066D) TTerminal::Open
(006C5738) TTerminalItem::ProcessEvent
(006C3C14) TSignalThread::Execute
(00098B63) Userinterface::C20_0
(0

The problem happens rarely. I cannot reproduce it.

Reply with quote

Advertisement

lnsirim@...
Guest

Invalid access to memory - _count234

<Try to describe precise steps that lead to the problem (where do you click, what keys do you press, what do you see, etc.)>
<If relevant, consider attaching a session log file or a screenshot)>

WinSCP 5.11.1

Error message:
Invalid access to memory.

Stack trace:
(0066240D) C2507_0
(0089C862) C5067_0
(0089E8CA) ____ExceptionHandler
(0089B684) __ExceptionHandler
(00081D3F) ntdll.dll
(0006F8EA) ntdll.dll.KiUserExceptionDispatcher
(0065F716) _count234
(0065FC1B) _add234
(00663CA9) _sk_addr_dup
(00663DA9) _putty_sk_new
(0062F605) _new_connection
(006357D3) _ssh_connshare_log
(0064226D) _sshfwd_x11_is_local
(00714777) TSecureShell::Open
(00759D0B) TSFTPFileSystem::Open
(007980AB) TTerminal::Reopen
(006E2915) TTerminalThread::TerminalReopenEvent
(006DDA70) TSignalThread::Execute
(000A0CE3) Userinterface::C20_0
(000152C2) KERNEL32.DLL.BaseThreadInitThunk
(0005FFD7) ntdll.dll
(0005FF9F) ntdll.dll

(0089CECD) C5067_0
(0089E4A7) _ReThrowException
(00714934) TSecureShell::Open
(00759D0B) TSFTPFileSystem::Open
(007980AB) TTerminal::Reopen
(006E2915) TTerminalThread::TerminalReopenEvent
(006DDA70) TSignalThread::Execute
(000A0CE3) Userinterface::C20_0
(000152C2) KERNEL32.DLL.BaseThreadInitThunk
(0005FFD7) ntdll.dll
(0005FF9F) ntdll.dll

(0089CECD) C5067_0
(0089E4A7) _ReThrowException
(0079696D) TTerminal::Open
(007980AB) TTerminal::Reopen
(006E2915) TTerminalThread::TerminalReopenEvent
(006DDA70) TSignalThread::Execute
(000A0CE3) Userinterface::C20_0
(000152C2) KERNEL32.DLL.BaseThreadInitThunk
(0005FFD7) ntdll.dll
(0005FF9F) ntdll.dll

The problem happens rarely. I cannot reproduce it.

Reply with quote

cindylue33@...
Guest

Invalid access to memory - _count234

<Try to describe precise steps that lead to the problem (where do you click, what keys do you press, what do you see, etc.)>
Happened during an overnight extremely large file transfer from unix server over VPN to hard drive. Has not happened previously. No one was here, so no keys pressed. However, VPN disconnected and this was shown on the prompt to reconnect (again, VPN disconnects have happened before without this issue).

<If relevant, consider attaching a session log file or a screenshot)>

WinSCP 5.11.1

Error message:
Invalid access to memory.

Stack trace:
(0066240D) C2507_0
(0089C862) C5067_0
(0089E8CA) ____ExceptionHandler
(0089B684) __ExceptionHandler
(000624F6) ntdll.dll
(0000F13E) ntdll.dll.KiUserExceptionDispatcher
(0065F716) _count234
(0065FC1B) _add234
(00663CA9) _sk_addr_dup
(00663DA9) _putty_sk_new
(0062F605) _new_connection
(006357D3) _ssh_connshare_log
(0064226D) _sshfwd_x11_is_local
(00714777) TSecureShell::Open
(00759D0B) TSFTPFileSystem::Open
(007980AB) TTerminal::Reopen
(006E2915) TTerminalThread::TerminalReopenEvent
(006DDA70) TSignalThread::Execute
(000A0CE3) Userinterface::C20_0
(00012368) kernel32.dll.BaseThreadInitThunk
(00038900) ntdll.dll
(000388D0) ntdll.dll

(0089CECD) C5067_0
(0089E4A7) _ReThrowException
(00714934) TSecureShell::Open
(00759D0B) TSFTPFileSystem::Open
(007980AB) TTerminal::Reopen
(006E2915) TTerminalThread::TerminalReopenEvent
(006DDA70) TSignalThread::Execute
(000A0CE3) Userinterface::C20_0
(00012368) kernel32.dll.BaseThreadInitThunk
(00038900) ntdll.dll
(000388D0) ntdll.dll

(0089CECD) C5067_0
(0089E4A7) _ReThrowException
(0079696D) TTerminal::Open
(007980AB) TTerminal::Reopen
(006E2915) TTerminalThread::TerminalReopenEvent
(006DDA70) TSignalThread::Execute
(000A0CE3) Userinterface::C20_0
(00012368) kernel32.dll.BaseThreadInitThunk
(00038900) ntdll.dll
(000388D0) ntdll.dll

The problem happens rarely. I cannot reproduce it.

Reply with quote

jmehlmann@...
Guest

Zugriffsverletzung - ungültiger Zugriff auf den Speicher - _count234

<Try to describe precise steps that lead to the problem (where do you click, what keys do you press, what do you see, etc.)>
<If relevant, consider attaching a session log file or a screenshot)>

WinSCP 5.11.1

Error message:
Zugriffsverletzung - ungültiger Zugriff auf den Speicher.

Stack trace:
(0066240D) C2507_0
(0089C862) C5067_0
(0089E8CA) ____ExceptionHandler
(0089B684) __ExceptionHandler
(000624F6) ntdll.dll
(0000F13E) ntdll.dll.KiUserExceptionDispatcher
(0065F716) _count234
(0065FC1B) _add234
(00663CA9) _sk_addr_dup
(00663DA9) _putty_sk_new
(0062F597) _new_connection
(006357D3) _ssh_connshare_log
(0064226D) _sshfwd_x11_is_local
(00714777) TSecureShell::Open
(0079627A) TTerminal::Open
(006DF690) TTerminalItem::ProcessEvent
(006DDA70) TSignalThread::Execute
(000A0CE3) Userinterface::C20_0
(00012368) kernel32.dll.BaseThreadInitThunk
(00038900) ntdll.dll
(000388D0) ntdll.dll

(0089CECD) C5067_0
(0089E4A7) _ReThrowException
(00714934) TSecureShell::Open
(0079627A) TTerminal::Open
(006DF690) TTerminalItem::ProcessEvent
(006DDA70) TSignalThread::Execute
(000A0CE3) Userinterface::C20_0
(00012368) kernel32.dll.BaseThreadInitThunk
(00038900) ntdll.dll
(000388D0) ntdll.dll

(0089CECD) C5067_0
(0089E4A7) _ReThrowException
(0079640F) TTerminal::Open
(006DF690) TTerminalItem::ProcessEvent
(006DDA70) TSignalThread::Execute
(000A0CE3) Userinterface::C20_0
(00012368) kernel32.dll.BaseThreadInitThunk
(00038900) ntdll.dll
(000388D0) ntdll.dll

(0089CECD) C5067_0
(0089E4A7) _ReThrowException
(0079696D) TTerminal::Open
(006DF690) TTerminalItem::ProcessEvent
(006DDA70) TSignalThread::Execute
(000A0CE3

The problem happens rarely. I cannot reproduce it.

Reply with quote

rainel.lobo@...
Guest

Invalid access to memory - _count234

<Try to describe precise steps that lead to the problem (where do you click, what keys do you press, what do you see, etc.)>
<If relevant, consider attaching a session log file or a screenshot)>

WinSCP 5.9.6

Error message:
Invalid access to memory.

Stack trace:
(0064BA05) C2507_0
(008689AA) C5077_0
(0086AA12) ____ExceptionHandler
(008677CC) __ExceptionHandler
(000851DF) ntdll.dll
(00073161) ntdll.dll.KiUserExceptionDispatcher
(00648D12) _count234
(00649217) _add234
(0064D29D) _sk_addr_dup
(0064D39D) _putty_sk_new
(00618CF9) _new_connection
(0061EEC7) _ssh_connshare_log
(0062B869) _sshfwd_x11_is_local
(006FAA1B) TSecureShell::Open
(0073897B) TSFTPFileSystem::Open
(00773887) TTerminal::Reopen
(006CA8B1) TTerminalThread::TerminalReopenEvent
(006C5878) TSignalThread::Execute
(00098E9B) Userinterface::C20_0
(00017742) KERNEL32.DLL.BaseThreadInitThunk
(0006482B) ntdll.dll.RtlGetAppContainerNamedObjectPath
(000647F8) ntdll.dll.RtlGetAppContainerNamedObjectPath

(00869015) C5077_0
(0086A5EF) _ReThrowException
(006FABD8) TSecureShell::Open
(0073897B) TSFTPFileSystem::Open
(00773887) TTerminal::Reopen
(006CA8B1) TTerminalThread::TerminalReopenEvent
(006C5878) TSignalThread::Execute
(00098E9B) Userinterface::C20_0
(00017742) KERNEL32.DLL.BaseThreadInitThunk
(0006482B) ntdll.dll.RtlGetAppContainerNamedObjectPath
(000647F8) ntdll.dll.RtlGetAppContainerNamedObjectPath

(00869015) C5077_0
(0086A5EF) _ReThrowException
(007722FD) TTerminal::Open
(00773887) TTerminal::Reopen
(006CA8B1) TTerminalThread::TerminalReopenEvent
(006C5878) TSignalThread::Execute
(00098E9B) Userinterface::C20_0
(00017742) KERNEL32.DLL.BaseThreadInitThunk
(0006482B) ntdll.dll.RtlGet

The problem happens rarely. I cannot reproduce it.

Reply with quote

Advertisement

719836413@...
Guest

无效的内存访问。 - _count234

<Try to describe precise steps that lead to the problem (where do you click, what keys do you press, what do you see, etc.)>
<If relevant, consider attaching a session log file or a screenshot)>

WinSCP 5.11.2

Error message:
无效的内存访问。

Stack trace:
(00662561) C2507_0
(0089C9C2) C5067_3
(0089EA2A) ____ExceptionHandler
(0089B7E4) __ExceptionHandler
(000851DF) ntdll.dll
(00073161) ntdll.dll.KiUserExceptionDispatcher
(0065F86A) _count234
(0065FD6F) _add234
(00663DFD) _sk_addr_dup
(00663EFD) _putty_sk_new
(0062F759) _new_connection
(00635927) _ssh_connshare_log
(006423C1) _sshfwd_x11_is_local
(007148CB) TSecureShell::Open
(007963CE) TTerminal::Open
(006E2A5B) TTerminalThread::TerminalOpenEvent
(006DDBC4) TSignalThread::Execute
(000A0D93) Userinterface::C20_0
(00017742) KERNEL32.DLL.BaseThreadInitThunk
(0006482B) ntdll.dll.RtlGetAppContainerNamedObjectPath
(000647F8) ntdll.dll.RtlGetAppContainerNamedObjectPath

(0089D02D) C5067_3
(0089E607) _ReThrowException
(00714A88) TSecureShell::Open
(007963CE) TTerminal::Open
(006E2A5B) TTerminalThread::TerminalOpenEvent
(006DDBC4) TSignalThread::Execute
(000A0D93) Userinterface::C20_0
(00017742) KERNEL32.DLL.BaseThreadInitThunk
(0006482B) ntdll.dll.RtlGetAppContainerNamedObjectPath
(000647F8) ntdll.dll.RtlGetAppContainerNamedObjectPath

(0089D02D) C5067_3
(0089E607) _ReThrowException
(00796563) TTerminal::Open
(006E2A5B) TTerminalThread::TerminalOpenEvent
(006DDBC4) TSignalThread::Execute
(000A0D93) Userinterface::C20_0
(00017742) KERNEL32.DLL.BaseThreadInitThunk
(0006482B) ntdll.dll.RtlGetAppContainerNamedObjectPath
(000647F8) ntdll.dll.RtlGetAppContainerNamedObjectPath

(

I know how to reproduce the problem or the problem happens frequently enough. I wish to be contacted by the WinSCP team to help resolving the problem.

Reply with quote

martin
Site Admin
martin avatar
Joined:
Posts:
31,744
Location:
Prague, Czechia

Re: 无效的内存访问。 - _count234

Thanks for your report.
I have sent you an email with a debug version of WinSCP to the address you have used to register on this forum.

Reply with quote

tron.BoGus@...
Guest

Invalid access to memory - _count234

<Try to describe precise steps that lead to the problem (where do you click, what keys do you press, what do you see, etc.)>
<If relevant, consider attaching a session log file or a screenshot)>

During the calculation phase of 2 of multiple folders to be copied, I increased the download threads from 2 to 6. The error came immediately after clicking OK/Apply/etc/??


WinSCP 5.11.3

Error message:
Invalid access to memory.

Stack trace:
(00662B15) C2507_0
(0089D34A) C5067_0
(0089F3B2) ____ExceptionHandler
(0089C16C) __ExceptionHandler
(00081D0F) ntdll.dll
(0006F88A) ntdll.dll.KiUserExceptionDispatcher
(0065FE1E) _count234
(00660323) _add234
(006643B1) _sk_addr_dup
(006644B1) _putty_sk_new
(0062FD0D) _new_connection
(00635EDB) _ssh_connshare_log
(00642975) _sshfwd_x11_is_local
(00714ECF) TSecureShell::Open
(00796C16) TTerminal::Open
(006DFD9C) TTerminalItem::ProcessEvent
(006DE17C) TSignalThread::Execute
(000A0DD7) Userinterface::C20_0
(000152C2) KERNEL32.DLL.BaseThreadInitThunk
(0005FF77) ntdll.dll
(0005FF3F) ntdll.dll

(0089D9B5) C5067_0
(0089EF8F) _ReThrowException
(0071508C) TSecureShell::Open
(00796C16) TTerminal::Open
(006DFD9C) TTerminalItem::ProcessEvent
(006DE17C) TSignalThread::Execute
(000A0DD7) Userinterface::C20_0
(000152C2) KERNEL32.DLL.BaseThreadInitThunk
(0005FF77) ntdll.dll
(0005FF3F) ntdll.dll

(0089D9B5) C5067_0
(0089EF8F) _ReThrowException
(00796DAB) TTerminal::Open
(006DFD9C) TTerminalItem::ProcessEvent
(006DE17C) TSignalThread::Execute
(000A0DD7) Userinterface::C20_0
(000152C2) KERNEL32.DLL.BaseThreadInitThunk
(0005FF77) ntdll.dll
(0005FF3F) ntdll.dll

(0089D9B5) C5067_0
(0089EF8F) _ReThrowException
(00797309) TTerminal::Open
(006DFD9C) TTerminalItem::ProcessEvent
(006DE17C) TSignalThread::Execute
(000A0DD7) Userinterface::C20_0
(0001

I know how to reproduce the problem or the problem happens frequently enough. I wish to be contacted by the WinSCP team to help resolving the problem.

Reply with quote

martin
Site Admin
martin avatar
Joined:
Posts:
31,744
Location:
Prague, Czechia

Re: Invalid access to memory - _count234

Thanks for your report.
I have sent you an email with a debug version of WinSCP to the address you have used to register on this forum.

Reply with quote

Advertisement

dlsate78@...
Guest

Invalid access to memory - _count234

hi there. this error occurred while i was transferring files from my pc to a single board computer. <Try to describe precise steps that lead to the problem (where do you click, what keys do you press, what do you see, etc.)>
<If relevant, consider attaching a session log file or a screenshot)>

WinSCP 5.11.3

Error message:
Invalid access to memory.

Stack trace:
(00662B15) C2507_0
(0089D34A) C5067_0
(0089F3B2) ____ExceptionHandler
(0089C16C) __ExceptionHandler
(00088D2F) ntdll.dll
(0006FBF1) ntdll.dll.KiUserExceptionDispatcher
(0065FE1E) _count234
(00660323) _add234
(006643B1) _sk_addr_dup
(006644B1) _putty_sk_new
(0062FD0D) _new_connection
(00635EDB) _ssh_connshare_log
(00642975) _sshfwd_x11_is_local
(00714ECF) TSecureShell::Open
(0075A6A7) TSFTPFileSystem::Open
(00798A47) TTerminal::Reopen
(006E3021) TTerminalThread::TerminalReopenEvent
(006DE17C) TSignalThread::Execute
(000A0DD7) Userinterface::C20_0
(00017652) KERNEL32.DLL.BaseThreadInitThunk
(00063A45) ntdll.dll.RtlGetAppContainerNamedObjectPath
(00063A12) ntdll.dll.RtlGetAppContainerNamedObjectPath

(0089D9B5) C5067_0
(0089EF8F) _ReThrowException
(0071508C) TSecureShell::Open
(0075A6A7) TSFTPFileSystem::Open
(00798A47) TTerminal::Reopen
(006E3021) TTerminalThread::TerminalReopenEvent
(006DE17C) TSignalThread::Execute
(000A0DD7) Userinterface::C20_0
(00017652) KERNEL32.DLL.BaseThreadInitThunk
(00063A45) ntdll.dll.RtlGetAppContainerNamedObjectPath
(00063A12) ntdll.dll.RtlGetAppContainerNamedObjectPath

(0089D9B5) C5067_0
(0089EF8F) _ReThrowException
(00797309) TTerminal::Open
(00798A47) TTerminal::Reopen
(006E3021) TTerminalThread::TerminalReopenEvent
(006DE17C) TSignalThread::Execute
(000A0DD7) Userinterface::C20_0
(00017652) KERNEL32.DLL.BaseThreadInitThunk
(00063A45) ntdll.dll.RtlGetAppContainerNamedObjectPath
(00063A12) ntdll.dll.RtlGetAppContainerNamedObjectPath

The problem happens rarely. I cannot reproduce it.

Reply with quote

virtwolf@...
Guest

Zugriffsverletzung - ungültiger Zugriff auf den Speicher - _count234

<Try to describe precise steps that lead to the problem (where do you click, what keys do you press, what do you see, etc.)>
<If relevant, consider attaching a session log file or a screenshot)>

WinSCP 5.11.3

Error message:
Zugriffsverletzung - ungültiger Zugriff auf den Speicher.

Stack trace:
(00662B15) C2507_0
(0089D34A) C5067_0
(0089F3B2) ____ExceptionHandler
(0089C16C) __ExceptionHandler
(0006248E) ntdll.dll
(0000F15E) ntdll.dll.KiUserExceptionDispatcher
(0065FE1E) _count234
(00660323) _add234
(006643B1) _sk_addr_dup
(006644B1) _putty_sk_new
(0062FD0D) _new_connection
(00635EDB) _ssh_connshare_log
(00642975) _sshfwd_x11_is_local
(00714ECF) TSecureShell::Open
(00796C16) TTerminal::Open
(006DFD9C) TTerminalItem::ProcessEvent
(006DE17C) TSignalThread::Execute
(000A0DD7) Userinterface::C20_0
(0001243B) kernel32.dll.BaseThreadInitThunk
(00038830) ntdll.dll
(00038800) ntdll.dll

(0089D9B5) C5067_0
(0089EF8F) _ReThrowException
(0071508C) TSecureShell::Open
(00796C16) TTerminal::Open
(006DFD9C) TTerminalItem::ProcessEvent
(006DE17C) TSignalThread::Execute
(000A0DD7) Userinterface::C20_0
(0001243B) kernel32.dll.BaseThreadInitThunk
(00038830) ntdll.dll
(00038800) ntdll.dll

(0089D9B5) C5067_0
(0089EF8F) _ReThrowException
(00796DAB) TTerminal::Open
(006DFD9C) TTerminalItem::ProcessEvent
(006DE17C) TSignalThread::Execute
(000A0DD7) Userinterface::C20_0
(0001243B) kernel32.dll.BaseThreadInitThunk
(00038830) ntdll.dll
(00038800) ntdll.dll

(0089D9B5) C5067_0
(0089EF8F) _ReThrowException
(00797309) TTerminal::Open
(006DFD9C) TTerminalItem::ProcessEvent
(006DE17C) TSignalThread::Execute
(000A0DD7

The problem happens rarely. I cannot reproduce it.

Reply with quote

bopke2@...
Guest

Naruszenie ochrony pamęci - _count234

<Try to describe precise steps that lead to the problem (where do you click, what keys do you press, what do you see, etc.)>
<If relevant, consider attaching a session log file or a screenshot)>

WinSCP 5.11.1

Error message:
Naruszenie ochrony pamęci.

Stack trace:
(0066240D) C2507_0
(0089C862) C5067_0
(0089E8CA) ____ExceptionHandler
(0089B684) __ExceptionHandler
(00088D1F) ntdll.dll
(0006FC11) ntdll.dll.KiUserExceptionDispatcher
(0065F716) _count234
(0065FC1B) _add234
(00663CA9) _sk_addr_dup
(00663DA9) _putty_sk_new
(0062F605) _new_connection
(006357D3) _ssh_connshare_log
(0064226D) _sshfwd_x11_is_local
(00714777) TSecureShell::Open
(00759D0B) TSFTPFileSystem::Open
(007980AB) TTerminal::Reopen
(006E2915) TTerminalThread::TerminalReopenEvent
(006DDA70) TSignalThread::Execute
(000A0CE3) Userinterface::C20_0
(00017652) KERNEL32.DLL.BaseThreadInitThunk
(00063A75) ntdll.dll.RtlGetAppContainerNamedObjectPath
(00063A42) ntdll.dll.RtlGetAppContainerNamedObjectPath

(0089CECD) C5067_0
(0089E4A7) _ReThrowException
(00714934) TSecureShell::Open
(00759D0B) TSFTPFileSystem::Open
(007980AB) TTerminal::Reopen
(006E2915) TTerminalThread::TerminalReopenEvent
(006DDA70) TSignalThread::Execute
(000A0CE3) Userinterface::C20_0
(00017652) KERNEL32.DLL.BaseThreadInitThunk
(00063A75) ntdll.dll.RtlGetAppContainerNamedObjectPath
(00063A42) ntdll.dll.RtlGetAppContainerNamedObjectPath

(0089CECD) C5067_0
(0089E4A7) _ReThrowException
(0079696D) TTerminal::Open
(007980AB) TTerminal::Reopen
(006E2915) TTerminalThread::TerminalReopenEvent
(006DDA70) TSignalThread::Execute
(000A0CE3) Userinterface::C20_0
(00017652) KERNEL32.DLL.BaseThreadInitThunk
(00063A75) ntdll.dll.RtlGetAppContainerNamedObjectPath
(00063A42) ntdll.dll.RtlGetAppContainerNamedObjectPath

The problem happens rarely. I cannot reproduce it.

Reply with quote

brett@...
Guest

Invalid access to memory - _count234

<Try to describe precise steps that lead to the problem (where do you click, what keys do you press, what do you see, etc.)>
<If relevant, consider attaching a session log file or a screenshot)>

WinSCP 5.13.1

Error message:
Invalid access to memory.

Stack trace:
(0066DB71) C2539_0
(008BA3F6) C5101_0
(008BC45E) ____ExceptionHandler
(008B9218) __ExceptionHandler
(00088DBF) ntdll.dll
(0006FCB1) ntdll.dll.KiUserExceptionDispatcher
(0066AE1E) _count234
(0066B323) _add234
(0066F40D) _sk_addr_dup
(0066F50D) _putty_sk_new
(0063AC8D) _new_connection
(00640E5B) _ssh_connshare_log
(0064D8FD) _sshfwd_x11_is_local
(00730143) TSecureShell::Open
(007B2BFB) TTerminal::Open
(006EC3C4) TTerminalItem::ProcessEvent
(006EA790) TSignalThread::Execute
(000A1ECF) Userinterface::C20_0
(00017652) KERNEL32.DLL.BaseThreadInitThunk
(00063B15) ntdll.dll.RtlGetAppContainerNamedObjectPath
(00063AE2) ntdll.dll.RtlGetAppContainerNamedObjectPath

(008BAA61) C5101_0
(008BC03B) _ReThrowException
(00730300) TSecureShell::Open
(007B2BFB) TTerminal::Open
(006EC3C4) TTerminalItem::ProcessEvent
(006EA790) TSignalThread::Execute
(000A1ECF) Userinterface::C20_0
(00017652) KERNEL32.DLL.BaseThreadInitThunk
(00063B15) ntdll.dll.RtlGetAppContainerNamedObjectPath
(00063AE2) ntdll.dll.RtlGetAppContainerNamedObjectPath

(008BAA61) C5101_0
(008BC03B) _ReThrowException
(007B2D60) TTerminal::Open
(006EC3C4) TTerminalItem::ProcessEvent
(006EA790) TSignalThread::Execute
(000A1ECF) Userinterface::C20_0
(00017652) KERNEL32.DLL.BaseThreadInitThunk
(00063B15) ntdll.dll.RtlGetAppContainerNamedObjectPath
(00063AE2) ntdll.dll.RtlGetAppContainerNamedObjectPath

(008BAA61) C5101_0
(008BC03B) _ReThrowException
(007B330D) TTerminal::Open
(006EC3C4) TTerminalItem::ProcessEvent
(006EA790) TSignalThread::Execute
(000A1ECF) Userinterface::C20_0
(00017652) KERNEL32.DLL.BaseThreadInitThunk
(00063B15) ntdll.dll.RtlGetAppContainerNamedObjectPath
(00063AE2) ntdll.dll.RtlGetAppContainerNamedObjectPath

The problem happens rarely. I cannot reproduce it.

Reply with quote

Advertisement

cristian.diaz.almuna@...
Guest

Acceso a memoria no válido - _count234

<Try to describe precise steps that lead to the problem (where do you click, what keys do you press, what do you see, etc.)>
<If relevant, consider attaching a session log file or a screenshot)>

WinSCP 5.13.3

Error message:
Acceso a memoria no válido

Traza de la pila:
(0066FC49) C2542_0
(008BCA5A) C5104_0
(008BEAC2) ____ExceptionHandler
(008BB87C) __ExceptionHandler
(0007DA8F) ntdll.dll
(0006B6B1) ntdll.dll.KiUserExceptionDispatcher
(0066CEF6) _count234
(0066D3FB) _add234
(006714E5) _sk_addr_dup
(006715E5) _putty_sk_new
(0063CD65) _new_connection
(00642F33) _ssh_connshare_log
(0064F9D5) _sshfwd_x11_is_local
(00732393) TSecureShell::Open
(0077CB37) TSFTPFileSystem::Open
(007B6C8B) TTerminal::Reopen
(006F1949) TTerminalThread::TerminalReopenEvent
(006EC950) TSignalThread::Execute
(000A329F) Userinterface::C20_0
(00017482) KERNEL32.DLL.BaseThreadInitThunk
(00061FE8) ntdll.dll.RtlValidSecurityDescriptor
(00061FB5) ntdll.dll.RtlValidSecurityDescriptor

(008BD0C5) C5104_0
(008BE69F) _ReThrowException
(00732550) TSecureShell::Open
(0077CB37) TSFTPFileSystem::Open
(007B6C8B) TTerminal::Reopen
(006F1949) TTerminalThread::TerminalReopenEvent
(006EC950) TSignalThread::Execute
(000A329F) Userinterface::C20_0
(00017482) KERNEL32.DLL.BaseThreadInitThunk
(00061FE8) ntdll.dll.RtlValidSecurityDescriptor
(00061FB5) ntdll.dll.RtlValidSecurityDescriptor

(008BD0C5) C5104_0
(008BE69F) _ReThrowException
(007B554D) TTerminal::Open
(007B6C8B) TTerminal::Reopen
(006F1949) TTerminalThread::TerminalReopenEvent
(006EC950) TSignalThread::Execute
(000A329F) Userinterface::C20_0
(00017482) KERNEL32.DLL.BaseThreadInitThunk
(00061FE8) ntdll.dll.RtlValidSecurityDescriptor
(00061FB5) ntdll.dll.RtlValidSecurityDescriptor

The problem happens rarely. I cannot reproduce it.

Reply with quote

gsangle@...
Guest

Invalid access to memory - _count234

<Try to describe precise steps that lead to the problem (where do you click, what keys do you press, what do you see, etc.)>
<If relevant, consider attaching a session log file or a screenshot)>

WinSCP 5.13.2

Error message:
Invalid access to memory.

Stack trace:
(0066FB05) C2542_0
(008BC642) C5104_0
(008BE6AA) ____ExceptionHandler
(008BB464) __ExceptionHandler
(0006248E) ntdll.dll
(0000F15E) ntdll.dll.KiUserExceptionDispatcher
(0066CDB2) _count234
(0066D2B7) _add234
(006713A1) _sk_addr_dup
(006714A1) _putty_sk_new
(0063CC21) _new_connection
(00642DEF) _ssh_connshare_log
(0064F891) _sshfwd_x11_is_local
(007321D3) TSecureShell::Open
(007B4C8B) TTerminal::Open
(006EE3DC) TTerminalItem::ProcessEvent
(006EC7A8) TSignalThread::Execute
(000A317B) Userinterface::C20_0
(0001243B) kernel32.dll.BaseThreadInitThunk
(00038830) ntdll.dll
(00038800) ntdll.dll

(008BCCAD) C5104_0
(008BE287) _ReThrowException
(00732390) TSecureShell::Open
(007B4C8B) TTerminal::Open
(006EE3DC) TTerminalItem::ProcessEvent
(006EC7A8) TSignalThread::Execute
(000A317B) Userinterface::C20_0
(0001243B) kernel32.dll.BaseThreadInitThunk
(00038830) ntdll.dll
(00038800) ntdll.dll

(008BCCAD) C5104_0
(008BE287) _ReThrowException
(007B4DF0) TTerminal::Open
(006EE3DC) TTerminalItem::ProcessEvent
(006EC7A8) TSignalThread::Execute
(000A317B) Userinterface::C20_0
(0001243B) kernel32.dll.BaseThreadInitThunk
(00038830) ntdll.dll
(00038800) ntdll.dll

(008BCCAD) C5104_0
(008BE287) _ReThrowException
(007B539D) TTerminal::Open
(006EE3DC) TTerminalItem::ProcessEvent
(006EC7A8) TSignalThread::Execute
(000A317B) Userinterface::C20_0
(0001

The problem happens rarely. I cannot reproduce it.

Reply with quote

santoshtandale@...
Guest

Invalid access to memory - _count234

<Try to describe precise steps that lead to the problem (where do you click, what keys do you press, what do you see, etc.)>
<If relevant, consider attaching a session log file or a screenshot)>

WinSCP 5.13.2

Error message:
Invalid access to memory.

Stack trace:
(0066FB05) C2542_0
(008BC642) C5104_0
(008BE6AA) ____ExceptionHandler
(008BB464) __ExceptionHandler
(0006248E) ntdll.dll
(0000F15E) ntdll.dll.KiUserExceptionDispatcher
(0066CDB2) _count234
(0066D2B7) _add234
(006713A1) _sk_addr_dup
(006714A1) _putty_sk_new
(0063CC21) _new_connection
(00642DEF) _ssh_connshare_log
(0064F891) _sshfwd_x11_is_local
(007321D3) TSecureShell::Open
(007B4C8B) TTerminal::Open
(006EE3DC) TTerminalItem::ProcessEvent
(006EC7A8) TSignalThread::Execute
(000A317B) Userinterface::C20_0
(0001243B) kernel32.dll.BaseThreadInitThunk
(00038830) ntdll.dll
(00038800) ntdll.dll

(008BCCAD) C5104_0
(008BE287) _ReThrowException
(00732390) TSecureShell::Open
(007B4C8B) TTerminal::Open
(006EE3DC) TTerminalItem::ProcessEvent
(006EC7A8) TSignalThread::Execute
(000A317B) Userinterface::C20_0
(0001243B) kernel32.dll.BaseThreadInitThunk
(00038830) ntdll.dll
(00038800) ntdll.dll

(008BCCAD) C5104_0
(008BE287) _ReThrowException
(007B4DF0) TTerminal::Open
(006EE3DC) TTerminalItem::ProcessEvent
(006EC7A8) TSignalThread::Execute
(000A317B) Userinterface::C20_0
(0001243B) kernel32.dll.BaseThreadInitThunk
(00038830) ntdll.dll
(00038800) ntdll.dll

(008BCCAD) C5104_0
(008BE287) _ReThrowException
(007B539D) TTerminal::Open
(006EE3DC) TTerminalItem::ProcessEvent
(006EC7A8) TSignalThread::Execute
(000A317B) Userinterface::C20_0
(0001

The problem happens rarely. I cannot reproduce it.

Reply with quote

ramakrishna_tl@...
Guest

Invalid access to memory - _count234

<Try to describe precise steps that lead to the problem (where do you click, what keys do you press, what do you see, etc.)>
<If relevant, consider attaching a session log file or a screenshot)>

WinSCP 5.13.4

Error message:
Invalid access to memory.

Stack trace:
(00670AC5) C2542_0
(008BDC8E) C5104_3
(008BFCF6) ____ExceptionHandler
(008BCAB0) __ExceptionHandler
(0006248E) ntdll.dll
(0000F15E) ntdll.dll.KiUserExceptionDispatcher
(0066DD72) _count234
(0066E277) _add234
(00672361) _sk_addr_dup
(00672461) _putty_sk_new
(0063DBE1) _new_connection
(00643DAF) _ssh_connshare_log
(00650851) _sshfwd_x11_is_local
(00733527) TSecureShell::Open
(007B5FCF) TTerminal::Open
(006F2A43) TTerminalThread::TerminalOpenEvent
(006EDA58) TSignalThread::Execute
(000A3B0B) Userinterface::C20_0
(0001243B) kernel32.dll.BaseThreadInitThunk
(00038800) ntdll.dll
(000387D0) ntdll.dll

(008BE2F9) C5104_3
(008BF8D3) _ReThrowException
(007336E4) TSecureShell::Open
(007B5FCF) TTerminal::Open
(006F2A43) TTerminalThread::TerminalOpenEvent
(006EDA58) TSignalThread::Execute
(000A3B0B) Userinterface::C20_0
(0001243B) kernel32.dll.BaseThreadInitThunk
(00038800) ntdll.dll
(000387D0) ntdll.dll

(008BE2F9) C5104_3
(008BF8D3) _ReThrowException
(007B6134) TTerminal::Open
(006F2A43) TTerminalThread::TerminalOpenEvent
(006EDA58) TSignalThread::Execute
(000A3B0B) Userinterface::C20_0
(0001243B) kernel32.dll.BaseThreadInitThunk
(00038800) ntdll.dll
(000387D0) ntdll.dll

(008BE2F9) C5104_3
(008BF8D3) _ReThrowException
(007B66E1) TTerminal::Open
(006F2A43) TTerminalThread::TerminalOpenEvent
(006EDA58) TSignalThread::Execute
(000A3B0B) Userinter

I know how to reproduce the problem or the problem happens frequently enough. I wish to be contacted by the WinSCP team to help resolving the problem.

Reply with quote

Advertisement

martin
Site Admin
martin avatar
Joined:
Posts:
31,744
Location:
Prague, Czechia

Re: Invalid access to memory - _count234

Thanks for your report.
I have sent you an email with a debug version of WinSCP to the address you have used to register on this forum.

Reply with quote

colio_303@...
Guest

Invalid access to memory - _count234

<Try to describe precise steps that lead to the problem (where do you click, what keys do you press, what do you see, etc.)>
<If relevant, consider attaching a session log file or a screenshot)>

WinSCP 5.13.3

Error message:
Invalid access to memory.

Stack trace:
(0066FC49) C2542_0
(008BCA5A) C5104_0
(008BEAC2) ____ExceptionHandler
(008BB87C) __ExceptionHandler
(0007DABF) ntdll.dll
(0006B6E1) ntdll.dll.KiUserExceptionDispatcher
(0066CEF6) _count234
(0066D3FB) _add234
(006714E5) _sk_addr_dup
(006715E5) _putty_sk_new
(0063CD65) _new_connection
(00642F33) _ssh_connshare_log
(0064F9D5) _sshfwd_x11_is_local
(00732393) TSecureShell::Open
(007B4E3B) TTerminal::Open
(006EE584) TTerminalItem::ProcessEvent
(006EC950) TSignalThread::Execute
(000A329F) Userinterface::C20_0
(00017482) KERNEL32.DLL.BaseThreadInitThunk
(0006202A) ntdll.dll.RtlValidSecurityDescriptor
(00061FF5) ntdll.dll.RtlValidSecurityDescriptor

(008BD0C5) C5104_0
(008BE69F) _ReThrowException
(00732550) TSecureShell::Open
(007B4E3B) TTerminal::Open
(006EE584) TTerminalItem::ProcessEvent
(006EC950) TSignalThread::Execute
(000A329F) Userinterface::C20_0
(00017482) KERNEL32.DLL.BaseThreadInitThunk
(0006202A) ntdll.dll.RtlValidSecurityDescriptor
(00061FF5) ntdll.dll.RtlValidSecurityDescriptor

(008BD0C5) C5104_0
(008BE69F) _ReThrowException
(007B4FA0) TTerminal::Open
(006EE584) TTerminalItem::ProcessEvent
(006EC950) TSignalThread::Execute
(000A329F) Userinterface::C20_0
(00017482) KERNEL32.DLL.BaseThreadInitThunk
(0006202A) ntdll.dll.RtlValidSecurityDescriptor
(00061FF5) ntdll.dll.RtlValidSecurityDescriptor

(008BD0C5) C5104_0
(008BE69F) _ReThrowException
(007B554D) TTerminal::Open
(006EE584) TTerminalItem::ProcessEvent
(006EC950) TSignalThread::Execute
(000A329F) Userinterface::C20_0
(00017482) KERNEL32.DLL.BaseThreadInitThunk
(0006202A) ntdll.dll.RtlValidSecurityDescriptor
(00061FF5) ntdll.dll.RtlValidSecurityDescriptor

The problem happens rarely. I cannot reproduce it.

Reply with quote

vojacet@...
Guest

Chyba přístupu do paměti - _count234

<Try to describe precise steps that lead to the problem (where do you click, what keys do you press, what do you see, etc.)>
<If relevant, consider attaching a session log file or a screenshot)>

WinSCP 5.15.1

Error message:
Chyba přístupu do paměti.

Stack trace:
(006C40C9) C2593_0
(0092636E) C5153_3
(009283D6) ____ExceptionHandler
(00925190) __ExceptionHandler
(0007E19F) ntdll.dll
(0006BD81) ntdll.dll.KiUserExceptionDispatcher
(006C1376) _count234
(006C187B) _add234
(006C5965) _sk_addr_dup
(006C5A65) _putty_sk_new
(00691161) _new_connection
(0069732F) _ssh_connshare_log
(006A3E0D) _sshfwd_x11_is_local
(0078E09B) TSecureShell::Open
(007DA35F) TSFTPFileSystem::Open
(008143CF) TTerminal::Reopen
(0074E1D9) TTerminalThread::TerminalReopenEvent
(00749128) TSignalThread::Execute
(000BB14B) Userinterface::C20_0
(00017492) KERNEL32.DLL.BaseThreadInitThunk
(000631C6) ntdll.dll.RtlAreBitsSet
(00063193) ntdll.dll.RtlAreBitsSet

(009269D9) C5153_3
(00927FB3) _ReThrowException
(0078E258) TSecureShell::Open
(007DA35F) TSFTPFileSystem::Open
(008143CF) TTerminal::Reopen
(0074E1D9) TTerminalThread::TerminalReopenEvent
(00749128) TSignalThread::Execute
(000BB14B) Userinterface::C20_0
(00017492) KERNEL32.DLL.BaseThreadInitThunk
(000631C6) ntdll.dll.RtlAreBitsSet
(00063193) ntdll.dll.RtlAreBitsSet

(009269D9) C5153_3
(00927FB3) _ReThrowException
(00812C91) TTerminal::Open
(008143CF) TTerminal::Reopen
(0074E1D9) TTerminalThread::TerminalReopenEvent
(00749128) TSignalThread::Execute
(000BB14B) Userinterface::C20_0
(00017492) KERNEL32.DLL.BaseThreadInitThunk
(000631C6) ntdll.dll.RtlAreBitsSet
(00063193) ntdll.dll.RtlAreBitsSet

There was running connection to the device that disapeared from network for several hours.
Attempt to reconect generate bug.
Happen for first time (situation and problem).

The problem happens rarely. I cannot reproduce it.

Reply with quote

myemail@...
Guest

Acceso a memoria no válido - _count234

<Try to describe precise steps that lead to the problem (where do you click, what keys do you press, what do you see, etc.)>
<If relevant, consider attaching a session log file or a screenshot)>

WinSCP 5.15.2

Error message:
Acceso a memoria no válido

Traza de la pila:
(006C4DA1) C2597_0
(0092709A) C5157_3
(00929102) ____ExceptionHandler
(00925EBC) __ExceptionHandler
(0007E19F) ntdll.dll
(0006BD81) ntdll.dll.KiUserExceptionDispatcher
(006C204E) _count234
(006C2553) _add234
(006C663D) _sk_addr_dup
(006C673D) _putty_sk_new
(00691E39) _new_connection
(00698007) _ssh_connshare_log
(006A4AE5) _sshfwd_x11_is_local
(0078ED9F) TSecureShell::Open
(008131D9) TTerminal::Open
(0074BA60) TTerminalItem::ProcessEvent
(00749E2C) TSignalThread::Execute
(000BB3EF) Userinterface::C20_0
(00017492) KERNEL32.DLL.BaseThreadInitThunk
(000631C6) ntdll.dll.RtlAreBitsSet
(00063193) ntdll.dll.RtlAreBitsSet

(00927705) C5157_3
(00928CDF) _ReThrowException
(0078EF5C) TSecureShell::Open
(008131D9) TTerminal::Open
(0074BA60) TTerminalItem::ProcessEvent
(00749E2C) TSignalThread::Execute
(000BB3EF) Userinterface::C20_0
(00017492) KERNEL32.DLL.BaseThreadInitThunk
(000631C6) ntdll.dll.RtlAreBitsSet
(00063193) ntdll.dll.RtlAreBitsSet

(00927705) C5157_3
(00928CDF) _ReThrowException
(0081333E) TTerminal::Open
(0074BA60) TTerminalItem::ProcessEvent
(00749E2C) TSignalThread::Execute
(000BB3EF) Userinterface::C20_0
(00017492) KERNEL32.DLL.BaseThreadInitThunk
(000631C6) ntdll.dll.RtlAreBitsSet
(00063193) ntdll.dll.RtlAreBitsSet

(00927705) C5157_3
(00928CDF) _ReThrowException
(0081390D) TTerminal::Open
(0074BA60) TTerminalItem::ProcessEvent
(00749E2C) TSignalThread::Execute
(000BB3EF) Userinterface::C20_0
(00017492) KERNEL32.DLL.BaseThreadInitThunk
(000631C6) ntdll.dll.RtlAreBitsSet
(00063193) ntdll.dll.RtlAreBitsSet

The problem happens rarely. I cannot reproduce it.

Reply with quote

Advertisement

gi-joe@...
Guest

Invalid access to memory - _count234

<Try to describe precise steps that lead to the problem (where do you click, what keys do you press, what do you see, etc.)>
<If relevant, consider attaching a session log file or a screenshot)>

WinSCP 5.15.3

Error message:
Invalid access to memory.

Stack trace:
(006C5249) C2597_0
(0092770A) C5157_3
(00929772) ____ExceptionHandler
(0092652C) __ExceptionHandler
(0007E19F) ntdll.dll
(0006BD81) ntdll.dll.KiUserExceptionDispatcher
(006C24F6) _count234
(006C29FB) _add234
(006C6AE5) _sk_addr_dup
(006C6BE5) _putty_sk_new
(006922D1) _new_connection
(0069849F) _ssh_connshare_log
(006A4F8D) _sshfwd_x11_is_local
(0078F3A7) TSecureShell::Open
(008137E1) TTerminal::Open
(0074F3C3) TTerminalThread::TerminalOpenEvent
(0074A320) TSignalThread::Execute
(000BB63B) Userinterface::C20_0
(00017492) KERNEL32.DLL.BaseThreadInitThunk
(000631C6) ntdll.dll.RtlAreBitsSet
(00063193) ntdll.dll.RtlAreBitsSet

(00927D75) C5157_3
(0092934F) _ReThrowException
(0078F564) TSecureShell::Open
(008137E1) TTerminal::Open
(0074F3C3) TTerminalThread::TerminalOpenEvent
(0074A320) TSignalThread::Execute
(000BB63B) Userinterface::C20_0
(00017492) KERNEL32.DLL.BaseThreadInitThunk
(000631C6) ntdll.dll.RtlAreBitsSet
(00063193) ntdll.dll.RtlAreBitsSet

(00927D75) C5157_3
(0092934F) _ReThrowException
(00813946) TTerminal::Open
(0074F3C3) TTerminalThread::TerminalOpenEvent
(0074A320) TSignalThread::Execute
(000BB63B) Userinterface::C20_0
(00017492) KERNEL32.DLL.BaseThreadInitThunk
(000631C6) ntdll.dll.RtlAreBitsSet
(00063193) ntdll.dll.RtlAreBitsSet

(00927D75) C5157_3
(0092934F) _ReThrowException
(00813F15) TTerminal::Open
(0074F3C3) TTerminalThread::TerminalOpenEvent
(0074A320) TSignalThread::Execute
(000BB63B) Userinterface::C20_0
(00017492) KERNEL32.DLL.BaseThreadInitThunk
(000631C6) ntdll.dll.RtlAreBitsSet
(00063193) ntdll.dll.RtlAreBitsSet

The problem happens rarely. I cannot reproduce it.

Reply with quote

brendon@...
Guest

Invalid access to memory - _count234

<Try to describe precise steps that lead to the problem (where do you click, what keys do you press, what do you see, etc.)>
<If relevant, consider attaching a session log file or a screenshot)>

WinSCP 5.15.3

Error message:
Invalid access to memory.

Stack trace:
(006C5249) C2597_0
(0092770A) C5157_3
(00929772) ____ExceptionHandler
(0092652C) __ExceptionHandler
(0007E19F) ntdll.dll
(0006BD81) ntdll.dll.KiUserExceptionDispatcher
(006C24F6) _count234
(006C29FB) _add234
(006C6AE5) _sk_addr_dup
(006C6BE5) _putty_sk_new
(006922D1) _new_connection
(0069849F) _ssh_connshare_log
(006A4F8D) _sshfwd_x11_is_local
(0078F3A7) TSecureShell::Open
(007DB5E3) TSFTPFileSystem::Open
(00815653) TTerminal::Reopen
(0074F3D1) TTerminalThread::TerminalReopenEvent
(0074A320) TSignalThread::Execute
(000BB63B) Userinterface::C20_0
(00017492) KERNEL32.DLL.BaseThreadInitThunk
(000631C6) ntdll.dll.RtlAreBitsSet
(00063193) ntdll.dll.RtlAreBitsSet

(00927D75) C5157_3
(0092934F) _ReThrowException
(0078F564) TSecureShell::Open
(007DB5E3) TSFTPFileSystem::Open
(00815653) TTerminal::Reopen
(0074F3D1) TTerminalThread::TerminalReopenEvent
(0074A320) TSignalThread::Execute
(000BB63B) Userinterface::C20_0
(00017492) KERNEL32.DLL.BaseThreadInitThunk
(000631C6) ntdll.dll.RtlAreBitsSet
(00063193) ntdll.dll.RtlAreBitsSet

(00927D75) C5157_3
(0092934F) _ReThrowException
(00813F15) TTerminal::Open
(00815653) TTerminal::Reopen
(0074F3D1) TTerminalThread::TerminalReopenEvent
(0074A320) TSignalThread::Execute
(000BB63B) Userinterface::C20_0
(00017492) KERNEL32.DLL.BaseThreadInitThunk
(000631C6) ntdll.dll.RtlAreBitsSet
(00063193) ntdll.dll.RtlAreBitsSet

The problem happens rarely. I cannot reproduce it.

Reply with quote

a.a@...
Guest

Accesso alla memoria non valido - _count234

<Try to describe precise steps that lead to the problem (where do you click, what keys do you press, what do you see, etc.)>
<If relevant, consider attaching a session log file or a screenshot)>

WinSCP 5.15.4

Error message:
Accesso alla memoria non valido.

Stack trace:
(006C5D79) C2597_0
(00928272) C5157_3
(0092A2DA) ____ExceptionHandler
(00927094) __ExceptionHandler
(00087D6F) ntdll.dll
(00073211) ntdll.dll.KiUserExceptionDispatcher
(006C3026) _count234
(006C352B) _add234
(006C7615) _sk_addr_dup
(006C7715) _putty_sk_new
(00692E01) _new_connection
(00698FCF) _ssh_connshare_log
(006A5ABD) _sshfwd_x11_is_local
(0078FED7) TSecureShell::Open
(00814311) TTerminal::Open
(0074FEF3) TTerminalThread::TerminalOpenEvent
(0074AE50) TSignalThread::Execute
(000BB663) Userinterface::C20_0
(00015357) KERNEL32.DLL.BaseThreadInitThunk
(00066B72) ntdll.dll.RtlGetAppContainerNamedObjectPath
(00066B3F) ntdll.dll.RtlGetAppContainerNamedObjectPath

(009288DD) C5157_3
(00929EB7) _ReThrowException
(00790094) TSecureShell::Open
(00814311) TTerminal::Open
(0074FEF3) TTerminalThread::TerminalOpenEvent
(0074AE50) TSignalThread::Execute
(000BB663) Userinterface::C20_0
(00015357) KERNEL32.DLL.BaseThreadInitThunk
(00066B72) ntdll.dll.RtlGetAppContainerNamedObjectPath
(00066B3F) ntdll.dll.RtlGetAppContainerNamedObjectPath

(009288DD) C5157_3
(00929EB7) _ReThrowException
(00814476) TTerminal::Open
(0074FEF3) TTerminalThread::TerminalOpenEvent
(0074AE50) TSignalThread::Execute
(000BB663) Userinterface::C20_0
(00015357) KERNEL32.DLL.BaseThreadInitThunk
(00066B72) ntdll.dll.RtlGetAppContainerNamedObjectPath
(00066B3F) ntdll.dll.RtlGetAppContainerNamedObjectPath

(009288DD) C5157_3
(00929EB7) _ReThrowException
(00814A45) TTerminal::Open
(0074FEF3) TTerminalThread::TerminalOpenEvent
(0074AE50) TSignalThread::Execute
(000BB663) Userinterface::C20_0
(00015357) KERNEL32.DLL.BaseThreadInitThunk
(00066B72) ntdll.dll.RtlGetAppContainerNamedObjectPath
(00066B3F) ntdll.dll.RtlGetAppContainerNamedObjectPath

I know how to reproduce the problem or the problem happens frequently enough. I wish to be contacted by the WinSCP team to help resolving the problem.

Reply with quote

martin
Site Admin
martin avatar
Joined:
Posts:
31,744
Location:
Prague, Czechia

Re: Accesso alla memoria non valido - _count234

Thanks for your report.
I have sent you an email with a debug version of WinSCP to the address you have used to register on this forum.

Reply with quote

Advertisement

You can post new topics in this forum