This is an old revision of the document!

SessionOptions Class

Defines information to allow an automatic connection and authentication of the session. Is used with Session.Open method.

This feature is available only in the latest beta release.

Syntax

Namespace: WinSCP

public sealed class SessionOptions

Name	Description
SessionOptions()	Default constructor.

Name	Description
FtpMode FtpMode	FTP mode. Possible values are `FtpMode.Passive` (default) and `FtpMode.Active`.
FtpSecure FtpSecure	FTPS mode. Possible values are `FtpSecure.None` (default), `FtpSecure.Implicit`, `FtpSecure.ExplicitSsl` and `FtpSecure.ExplicitTls`.
string HostName	Name of the host to connect to. Mandatory property.
string Password	Password for authentication.
int PortNumber	Port number to connect to. Keep default `0` to use the default port for the protocol.
Protocol Protocol	Protocol to use for the session. Possible values are `Protocol.Sftp` (default), `Protocol.Scp` and `Protocol.Ftp`.
string SshHostKey	Host key of the SSH server. Mandatory for SFTP/SCP protocol.1
string SshPrivateKey	Full path to private key file. The key has to be passphrase-less or Pageant) has to be running with the key loaded (`SshPrivateKey` then server only to select, what private key Pageant should use, in case more are loaded).
string SslSertificate	SSL/TLS certificate to be automatically accepted (useful for certificates signed by untrusted authority).
TimeSpan Timeout	Server response timeout. Defaults to 15 seconds.
string UserName	Username for authentication. Mandatory property.

Name	Description
void AddRawSettings(string setting, string value)	Allows configuring any session settings using raw format as in an INI file. E.g. to enable SSH compression and agent forwarding use `AddRawSettings("Compression", "1")` and `AddRawSettings("AgentFwd", "1")`.

You need to fill in all properties required to connect and authenticate your session automatically.

You always need to fill in Protocol, HostName and UserName2.

In most cases you need to fill in Password. Exceptions are:

You use different authentication method than a password authentication, such as public key authetication (with passphrase-less private key or with use of Pageant) for SSH session;
The server does not require password.

For SSH (SFTP/SCP) session you need to fill in the SshHostKey to verify the expected server host key.

You can leave the property null, if you set Session.DefaultConfiguration to false and make sure the host key is already accepted in the configuration, only (not recommended).Back
Except for very rare occasions that the server does not require username.Back