Yes, found out that my network setting had IPV6 enabled which was blocking my continuous connection to the target host server. Resolved it by myself. You can close this topic. Thanks.
- cswamy
Post a reply
Before posting, please read how to report bug or request support effectively.
Bug reports without an attached log file are usually useless.
Topic review
- martin
It looks like a network outage.
Does the file upload using any other SFTP client?
Does the file upload using any other SFTP client?
- cswamy
please see the attached log file, thanks
- martin
Re: Large file transfer fails
@cswamy: Please attach a full session log file showing the problem (using the latest version of WinSCP).
To generate the session log file, enable logging, log in to your server and do the operation and only the operation that causes the error. Submit the log with your post as an attachment. Note that passwords and passphrases not stored in the log. You may want to remove other data you consider sensitive though, such as host names, IP addresses, account names or file names (unless they are relevant to the problem). If you do not want to post the log publicly, you can mark the attachment as private.
- Guest
As there's 2.7GB+ that transfers, its very unlikely to be the client. You really need to look at logs from the client and from the server to maybe see what might be going on
To have bytes stop in the middle of a code transfer loop, its expected (by me) to be a connection based issue.
There are things that won't be normal, like not seeing storage is out of space, or a number of other things.
You can see what Martin thinks since he's not replied yet =)
To have bytes stop in the middle of a code transfer loop, its expected (by me) to be a connection based issue.
There are things that won't be normal, like not seeing storage is out of space, or a number of other things.
You can see what Martin thinks since he's not replied yet =)
- cswamy
Large file transfer fails
The transfer of a large file of 3GB+ file fails while uploading from Windows 11 to Linux 64 server requesting target server credentials again. This results in not completing the file transfer. It failed after completing the transfer of about 2.7GB in 3.11 minutes. Anyway to remediate this interruption? Thanks.