Can not connect and receive "Incoming packet was garbled on decryption" msg.
I've tried to use WinSCP2 ver. 2.2.3 to connect to remote host. My problem is I can not connect to remote server and receive message: "Incoming packet was garbled on decryption".
When I use
Below is debug log from my
and after entering password files are copied.
When I use
scp command from Linux system to connect to that remote host all files are copied correctly.
Below is debug log from my
scp Linux connection:
OpenSSH_3.1p1, SSH protocols 1.5/2.0, OpenSSL 0x0090602f debug1: Reading configuration data /etc/ssh/ssh_config debug1: Applying options for * debug1: Rhosts Authentication disabled, originating port will not be trusted. debug1: restore_uid debug1: ssh_connect: getuid 500 geteuid 0 anon 1 debug1: Connecting to egb.pl [xxx.xxx.xxx.xx] port 22. debug1: temporarily_use_uid: 500/501 (e=0) debug1: restore_uid debug1: temporarily_use_uid: 500/501 (e=0) debug1: restore_uid debug1: Connection established. debug1: read PEM private key done: type DSA debug1: read PEM private key done: type RSA debug1: identity file /home/user/.ssh/identity type -1 debug1: identity file /home/user/.ssh/id_rsa type -1 debug1: identity file /home/user/.ssh/id_dsa type -1 debug1: Remote protocol version 2.0, remote software version 2.0.13 (non-commercial) debug1: match: 2.0.13 (non-commercial) pat 2.0.13*,2.0.14*,2.0.15*,2.0.16*,2.0.17*,2.0.18*,2.0.19* Enabling compatibility mode for protocol 2.0 debug1: Local version string SSH-2.0-OpenSSH_3.1p1 debug1: SSH2_MSG_KEXINIT sent debug1: SSH2_MSG_KEXINIT received debug1: kex: server->client 3des-cbc hmac-md5 none debug1: kex: client->server 3des-cbc hmac-md5 none debug1: dh_gen_key: priv key bits set: 184/384 debug1: bits set: 542/1024 debug1: sending SSH2_MSG_KEXDH_INIT debug1: expecting SSH2_MSG_KEXDH_REPLY debug1: Host 'egb.pl' is known and matches the DSA host key. debug1: Found key in /home/user/.ssh/known_hosts:1 debug1: bits set: 511/1024 debug1: ssh_dss_verify: signature correct debug1: kex_derive_keys debug1: newkeys: mode 1 debug1: SSH2_MSG_NEWKEYS sent debug1: waiting for SSH2_MSG_NEWKEYS debug1: newkeys: mode 0 debug1: SSH2_MSG_NEWKEYS received debug1: done: ssh_kex2. debug1: send SSH2_MSG_SERVICE_REQUEST debug1: buggy server: service_accept w/o service debug1: got SSH2_MSG_SERVICE_ACCEPT debug1: authentications that can continue: publickey,password debug1: next auth method to try is publickey debug1: try privkey: /home/user/.ssh/identity debug1: try privkey: /home/user/.ssh/id_rsa debug1: try privkey: /home/user/.ssh/id_dsa debug1: next auth method to try is password user@remote.host.com's password:
