[WinSCP 6.3]: GUI Download of files simply stops

Advertisement

cmmfl
Joined:
Posts:
2
Location:
Florida, USA

[WinSCP 6.3]: GUI Download of files simply stops

Just updated to WinSCP 6.3. Using the GUI tool to download a directory of files, the first couple of files are successfully downloaded and then the tool hangs, with the appearance of "still downloading". I've included a portion of the log, from the point that the last successful download was processed.
. 2024-02-16 12:32:48.456 Download successful
. 2024-02-16 12:32:48.456 Got reply 1 to the command 4
. 2024-02-16 12:32:48.457 Transfer done: '/images/samples/2_small.jpg' => 'C:\xampp\htdocs\xxx\images\samples\2_small.jpg' [4289]
. 2024-02-16 12:32:48.457 File: '/images/samples/3_small.jpg' [2022-03-08T14:32:20.000Z] [5331]
. 2024-02-16 12:32:48.457 Copying "/images/samples/3_small.jpg" to local directory started.
. 2024-02-16 12:32:48.457 Binary transfer mode selected.
. 2024-02-16 12:32:48.458 Starting download of /images/samples/3_small.jpg
> 2024-02-16 12:32:48.458 TYPE I
. 2024-02-16 12:32:48.520 Read 30 bytes
< 2024-02-16 12:32:48.520 200 TYPE is now 8-bit binary
> 2024-02-16 12:32:48.520 PASV
. 2024-02-16 12:32:48.586 Read 52 bytes
< 2024-02-16 12:32:48.586 227 Entering Passive Mode (104,219,13,213,223,114)
> 2024-02-16 12:32:48.586 RETR 3_small.jpg
. 2024-02-16 12:32:48.586 Connecting to 104.219.13.213:57202 ...
. 2024-02-16 12:32:48.586 Connection pending
. 2024-02-16 12:32:48.643 Data connection opened
. 2024-02-16 12:32:48.705 Read 30 bytes
< 2024-02-16 12:32:48.705 150-Accepted data connection
. 2024-02-16 12:32:48.705 Read 28 bytes
< 2024-02-16 12:32:48.705 150 5.2 kbytes to download
. 2024-02-16 12:32:48.705 Data connection opened
. 2024-02-16 12:32:48.705 Trying reuse main TLS session ID
. 2024-02-16 12:32:48.706 Transfer progress: Transferred: 8,416, Left: 0:00:01, CPS: 9,456/s
. 2024-02-16 12:32:48.706 TLS layer changed state from none to connected
. 2024-02-16 12:32:48.769 TLS connect: SSLv3/TLS write client hello
. 2024-02-16 12:32:48.769 TLS connect: SSLv3/TLS read server hello
. 2024-02-16 12:32:48.769 TLS connect: SSLv3/TLS write change cipher spec
. 2024-02-16 12:32:48.770 TLS connect: SSLv3/TLS write client hello
. 2024-02-16 12:32:48.836 TLS connect: SSLv3/TLS write client hello
. 2024-02-16 12:32:48.838 TLS connect: SSLv3/TLS read server hello
. 2024-02-16 12:32:48.838 TLS connect: TLSv1.3 read encrypted extensions
. 2024-02-16 12:32:48.838 TLS connect: SSLv3/TLS read finished
. 2024-02-16 12:32:48.863 TLS connect: SSLv3/TLS write finished
. 2024-02-16 12:32:48.863 Session ID reused
. 2024-02-16 12:32:48.864 Using TLSv1.3, cipher TLSv1.3: TLS_AES_256_GCM_SHA384, 4096 bit RSA, TLS_AES_256_GCM_SHA384         TLSv1.3 Kx=any      Au=any   Enc=AESGCM(256)            Mac=AEAD
. 2024-02-16 12:32:48.864 TLS connection established
. 2024-02-16 12:32:48.924 TLS connect: SSL negotiation finished successfully
. 2024-02-16 12:32:48.924 TLS connect: SSL negotiation finished successfully
. 2024-02-16 12:32:48.924 Session ID changed
. 2024-02-16 12:32:48.924 TLS connect: SSLv3/TLS read server session ticket
. 2024-02-16 12:32:48.924 Read 35 bytes
< 2024-02-16 12:32:48.924 226-File successfully transferred
. 2024-02-16 12:32:48.924 TLS layer changed state from connected to closed
. 2024-02-16 12:32:48.924 Read 60 bytes
< 2024-02-16 12:32:48.924 226 0.000 seconds (measured here), 44.15 Mbytes per second
. 2024-02-16 12:32:48.925 Data connection closed

Reply with quote

Advertisement

martin
Site Admin
martin avatar
Joined:
Posts:
40,605
Location:
Prague, Czechia

Re: [WinSCP 6.3]: GUI Download of files simply stops

Thanks for your report.
I have sent you an email with a debug version of WinSCP to the address you have used to register on this forum.

Reply with quote

cmmfl

Unable to replicate

I tried the debug file sent, which did not replicate the issue. Unfortunately, I'm not able to replicate with v6.3 now, either.

Reply with quote

Advertisement

You can post new topics in this forum