Error Messages

You may get this message when connecting to a server for following reasons:

• You are trying to use WinSCP for a purpose for which it is not designed. WinSCP needs a SSH or FTP server to be installed at the other end (on the machine you want to connect to). In particular, you cannot easily use it to connect to another Windows workstation, since Windows does not have an SSH or FTP server included by default.
• You are trying to use protocol that the server does not support. Particularly you are trying SFTP/SCP (over SSH), but the server supports FTP; or vice versa. Check selected protocol on login dialog.
• The server is running on non-standard port. Please make sure you enter actual port number of login dialog.
• You may need to connect through proxy server, but you have not specified one on login dialog.
• Connection was blocked by firewall. Please refer to FAQ.

If you are trying to use WinSCP to connect to your iPhone or iPod Touch, please refer to FAQ.

All reasons and hints for “Network error: Connection refused” above apply to this error too.

All reasons and hints for “Network error: Connection refused” above apply to this error too.

If you get the error while logging in, your connection may have been blocked by firewall. Please refer to FAQ.

You may get this message when connecting to a server for following reasons:

• You may have typed a wrong hostname on Login dialog.
• Your domain name is new and is not fully distributed to DNS servers yet.
• Connection was blocked by firewall. Please refer to FAQ.

If you get this error message while logging into your server, it is most usually cause by the server not being able to run some process necessary to support your session. Possibilities are:

• Shell. Your account may not be allowed to start a shell at all. With some servers (like OpenSSH), you may need to be allowed to start a shell, even if using SFTP protocol. Also some servers refuse to start a shell if your password has expired or your account was terminated.
• SFTP server. Your account may not be able to start SFTP server binary (e.g. /bin/sftp-server) or the binary is not present on your server. Your SSH server may also lack the SFTP subsystem.

You will get the error while authenticating when:

• You have entered incorrect password, used used non-authorized key, etc.
• The account you are trying to use cannot be logged in. This can be case even when you get “Access denied” only after entering password, as for security reasons, most SSH servers do not reveal information about the accounts. Reasons for not being allowed to login include:
  • The account (username) you have entered on Login dialog does not exist at all.
  • The account is disabled.
  • The password has expired.
  • Number of parallel sessions allowed for the account has been exceeded.
  • You are trying to connect with super-user account (root), without having allowed that. Please read FAQ.

You will get the error with SCP protocol, if output of ls command cannot be parsed by WinSCP. WinSCP expects listing in format:

<type><permissions> <inode> <owner> <group> <size> <timestamp> <filename>[ -> <target>]

Some common examples:

drw-r--r--    3 martinp users        4596 2007-06-06 11:18:33.000000000 +0200 private

lrwxrwxrwx    1 martinp users           4 Mar 24  2005 wiki -> dokuwiki

drwxr-xr-x+   2 martinp users          96 Oct 26 14:58 httpdocs

If your listing does not correspond to some of the above:

• Try using SFTP protocol instead of SCP.
• Always make sure you are using the latest version of WinSCP, as support for different listing format is being added continuously.
• Alter output of ls command to match any of the supported formatting. WinSCP has few session options that may be used for that, including:
  • Alias LS to display group name (should help if your listing does not include group name);
  • Clear aliases (may help if the ls command is aliased to display non standard output) and
  • Clear national variables (may help if your listing does not use english month names).
• Make sure you are using bash shell. If you do not want to set it as your default shell, force it for WinSCP sessions.
• If you are are experienced with unix shell, you can setup alias to ls command that would modify the output to match some of the supported formatting (e.g. using sed command). You will need to unset Clear aliases session option to disallow WinSCP from removing your alias. The next version of WinSCP will allow setting custom listing command to make this easier 142.

If … (from the subject) is a very large number then the problem is typically caused by a message printed from some profile/logon script. It violates the SFTP protocol. Some of these scripts are executed even for non-interactive (no TTY) sessions, so they cannot print anything (nor ask user to type something).

The number … represents the first four bytes read from the server. If your login scripts are printing words, this will be the first four characters cast into a number, and not an SFTP message at all.

To fix the problem find out what command in your login script prints text. Once you find it move the command to the proper interactive script, or remove it entirely. The scripts are usually hidden (their name starts with dot) and are located in your home directory on the server.

There are other possible sources of the message in addition to the profile script - some SSH servers print messages if they are unable to start the SFTP server, or encounter a fatal error. You should contact your server administrator.

Another possibility is that the server is configured to only allow the SCP protocol and not the SFTP protocol, in such a way that SCP fallback mechnism of WinSCP does not work. The solution is to choose SCP protocol on the login dialog.

You will get the error with SCP protocol, if command necessary for facilitate operation you were trying to do does not exist on remote server or the shell cannot find it.

If you are not an experienced Unix user, you should first try using SFTP protocol instead.

If you are sure that the command exists on the remote server, make sure that WinSCP (or rather the shell) can find it. You may need to add path to the command to PATH environment variable. Also make sure that the startup script that sets PATH is actually executed for non-interactive sessions.

This error message is not useful for you as an end-user. It generally means that there is a bug in the software. Please report the bug.