new pb with resume
I currently use winscp 4.02 in DOS mode.
After a communication break, WinSCP tries to reconnect automatically every 2s . ( By the mean, this delay cannot be changed -refer to my previous topic)
If the communication break is too long ( 2 or 3 hours), the transfer cannot resume correctly after communication repair and
The following message :
No buffer space available.
appears
For information, memory space used by Winscp.exe grows up to 18MB !
Sincerely
After a communication break, WinSCP tries to reconnect automatically every 2s . ( By the mean, this delay cannot be changed -refer to my previous topic)
If the communication break is too long ( 2 or 3 hours), the transfer cannot resume correctly after communication repair and
The following message :
No buffer space available.
appears
For information, memory space used by Winscp.exe grows up to 18MB !
Sincerely
