Connecting securely to Amazon EC2 server with SFTP

Before starting you should:

• Have WinSCP installed;
• Have Amazon EC2 instance running;
• Have enabled inbound SSH traffic from your IP address to your instance;
• Have your key pair ready;g

Collect information about your EC2 instance:

• Host name: Check Public DNS column on Instances page of Amazon EC2 console. Note that the public DNS may change when instance is restarted.
• Host key fingerprint: On the first connect you will be prompted to verify server host key.
  • You can locate key fingerprint in server’s initial start log, when host keys are generated.1 Use Actions > Instance Settings > Get System Log command on Instances page of Amazon EC2 console:
    
    
    
    The format of host key display in the log may differ with distribution or its version.
    Alternatively use aws ec2 get-console-output command.
  • If you did not save the fingerprint on the first instance run, but you have another EC2 instance that you can connect to safely (you know its fingerprints), you can connect to the target instance using private IP from the trusted instance. Staying within private Amazon network keeps you safe from man-in-the-middle attacks. When on the trusted instance terminal, you can use following commands to collect fingerprints:
    

    $ ssh-keyscan <target_instance_private_ip> > ec2key
    $ ssh-keygen -l -f ec2key
    256 SHA256:oZHeiMEPLKetRgd3M5Itgwaqr2zJJH93EvSdx5UoHbQ <ip> (ED25519)
    2048 SHA256:8zg105EUFFrPFpVzdfTGsgXnxuSpTiQd85k0uNapUio <ip> (RSA)
    256 SHA256:L7UXLw0djE5B9W7ZhvrkYVSTZyi1MEQ2dBaRtpkkUGY <ip> (ECDSA)
    

  • If you do not have another trusted instance, you can create new temporary instance, just for the purpose of collecting the keys. First find keys for the new temporary instance, using it’s initial start log. Then collect keys of the target instance by connecting to it from the temporary instance. After that you can discard the temporary instance.

Start WinSCP. Login dialog will appear. On the dialog:

• Make sure New site node is selected.
• On New site node, make sure SFTP protocol is selected.
• Enter your EC2 instance public DSN name (see above) into Host name box.
• User name differs with instance type:
  • For an Amazon Linux AMI, the user name is ec2-user.
  • For a RHEL5 AMI, the user name is either root or ec2-user.
  • For an Ubuntu AMI, the user name is ubuntu.
  • For an Centos AMI, the user name is centos.
  • For a Fedora AMI, the user name is either fedora or ec2-user.
  • For SUSE Linux, the user name is root or ec2-user.
• Press Advanced button to open Advanced site settings dialog and go to SSH > Authentication page.
• In Private key file box select the .pem private key file. WinSCP will need to convert the key to its .ppk format (you can then use the converted .ppk key for example with PuTTY SSH client).
• Submit Advanced site settings dialog with OK button.
• Save your site settings using Save button.
  
  
  
  
• Login using Login button.
• Verify the host key by comparing fingerprints with those collected before (see above).

If you are managing a large amount of servers, and it is not feasible for you to save a site for each of them in WinSCP, consider using the user script Injecting SFTP or FTP URL to a page (Amazon EC2 management console).

To connect to an EC2 instance in an Amazon VPC, you can tunnel through a NAT instance.

For details, see Connect to FTP/SFTP server which can be accessed via another server only.

In Host name, specify your Instance ID.

Press Advanced button to open Advanced site settings dialog and go to Connection > Proxy page. There:

• For Proxy type, select Local.
• In Local proxy command, specify:
  

  aws ssm start-session --target %host --document-name AWS-StartSSHSession --parameters "portNumber=%port" --profile <aws profile> --region <region>

• You may need to set Do DNS name lookup at proxy end to Yes.

• Upload files to FTP server or SFTP server;
• Automate file transfers (or synchronization) to FTP server or SFTP server;
• How do I change user after login (e.g. su root)?
• Official AWS guide for connecting using PuTTY/WinSCP;
• Official AWS guide for transfering files using a WinSCP
• Connecting securely to Google Compute Engine server with SFTP;
• Connecting securely to Microsoft Azure service with SFTP or FTPS.